Top Punch for Lee Moulds

[larryeliz]

Greetings guys, I'm new to the forum and enjoying getting back into casting. In the past I never considered Lee moulds but, this go-round, I'm considering them. If we purchase Lyman or RCBS moulds they recommend a top punch for that bullet. What does one do when we buy a Lee mould? Do we look at Lyman/RCBS recommendations for similar bullets? Advise welcomed.
Thanks,
Larry
Tulsa OK

[45nut]

Welcome aboard.

You guessed it right for the top punches, but one of our guys made a partial chart that is posted at Castpics,, look for the banner below.

[copdills]

Welcome to the forum larryeliz

[Alchemist]

If you can't find a suitable top punch for a given boolit...Buckshot makes blanks that you customize with epoxy or JB weld to a perfect fit. Works great!

BTW...welcome to the board!

Alchemist

[larryeliz]

Thanks for the info and thanks for the hospitality!

Larry