wdr2
08-23-2018, 12:28 PM
Lightly used Miha 2-cav 45 Ruger Only HP Brass Plain Base Mold with large HP and penta pins, $80 shipped, USA.
PayPal, USPS MO, or Certified Check preferred. Post "I'll take it" here first then send a PM.
This mold is very easy to cast with and is in pristine shape. I used the mold in just one casting session of about 150 bullets with the large round pins only. The bullet is 327 gr. as a solid and 299 gr. with the HP pins. It will cast at 0.454", meplat to crimp groove measurement is 0.456" This is a very nice mold for either the 45 Colt or 454 Casull in large frame Rugers, SA or DA. Details about this design are here:
http://castboolits.gunloads.com/showthread.php?193757-MiHec-2-or-4-cavity-brass-45-Ruger-Only-Cramer-HP
225980
225981
PayPal, USPS MO, or Certified Check preferred. Post "I'll take it" here first then send a PM.
This mold is very easy to cast with and is in pristine shape. I used the mold in just one casting session of about 150 bullets with the large round pins only. The bullet is 327 gr. as a solid and 299 gr. with the HP pins. It will cast at 0.454", meplat to crimp groove measurement is 0.456" This is a very nice mold for either the 45 Colt or 454 Casull in large frame Rugers, SA or DA. Details about this design are here:
http://castboolits.gunloads.com/showthread.php?193757-MiHec-2-or-4-cavity-brass-45-Ruger-Only-Cramer-HP
225980
225981