Rp-
08-15-2018, 10:22 AM
I have restored dozens of Arisakas in my time. This one I wanted to try to make into a medium range shooter but then bought a Ruger instead. This rifle has a scope mount already Installed. The stock has been cut and some kind of repair with an epoxy under the rear tang. The bolt handle has been bent and ground to clear a scope. The scope on the rifle was garbage and removed.
This is ideal for someone wanting to do some work on the rifle and work it into a good shooter. I have about 150 brass for it and about 40 are loaded. I also have the dies for it.
Looking for $325 shipped. I'd consider partial trades for 7-08 brass and/or dies, 452 Cal mold, 224 mold.
Sent from my LGLS991 using Tapatalk
This is ideal for someone wanting to do some work on the rifle and work it into a good shooter. I have about 150 brass for it and about 40 are loaded. I also have the dies for it.
Looking for $325 shipped. I'd consider partial trades for 7-08 brass and/or dies, 452 Cal mold, 224 mold.
Sent from my LGLS991 using Tapatalk