CLOSED:RERUN - MP 452374 (Lyman) in Solid or HP

[Lakehouse2012]

NOTE- I'm modifying this thread to a HP only and taking the 6-cav aluminum to a separate thread. Anyone that signed up for the 6-cav alum, your request has been moved over to the solid alum here:

http://castboolits.gunloads.com/showthread.php?381660-RERUN-MP-452374-(Lyman)-6-cav-alum-Solid-ONLY


Spoke with Miha today, he has been out of stock of this one for quick awhile and it hasn't been run in 2 years. So lets see what the interest is:

224332

This is a sign-up thread for a copy of the Lyman 452374 hardball design........ It casts out at 0.454" just as the Lyman original does and sizes easily to 0.452". The original has shot very accurately in everything we've tried it in.

Prices are -

- 4 Cavity HP all pins included 135 Euro's (114,75 with discount)

- 4 cavity Solid in brass 114 Euros (95 with discount)

Pins include: Large HP, Penta HP, and Roundnose Blank

Please give your disguised e-mail address (you won't be on the list for an invoice unless you do so) and the number of molds you want.

Look here for GB mold production updates:
http://castboolits.gunloads.com/showthread.php?t=154992

The discussion thread is here:
http://castboolits.gunloads.com/showthread.php?t=144665

Sequence of events:
1) Participants order molds and are placed on the list.
2) Group Buy will close (which will be posted on the thread) at some time determined by MiHec.
3) Molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. (Extra molds should be available... order them by PM to MiHec)
4) Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... It is my understanding the invoice will be in Euros which Paypal converts from Euros to dollars.
5) After you pay, the mold gets shipped.


Group Buy List

4 Cavity HP

1) Goodalloy - 4 cav HP
2) (ronic) robert dot davisson at comcast dot net - 4 cavity brass HP 48103
3) (jmort) - middle earth sales and service at g mail dot com - 4 Cavity HP all pins, NLG, .452"
4) (jmort) - middle earth sales and service at g mail dot com - 4 Cavity HP all pins, No Lube Groove, .452"
5) (Lakehouse2012) - sorgatz At ameritech d0t net - 4-cav HP, BB, .454"
6)
7)
8)
9)
10)

4 Cavity Solid

1) (law.man) brass 4 cavity solid, worgen dot wiki At gmail dot com[B}with handles[/B]
2) (autodidact) - jbpaul at suddenlink dot net - 4 cavity brass solid, NLG, .452", zip 71111
3) (autodidact) - jbpaul at suddenlink dot net - 4 cavity brass solid, NLG, .452", zip 71111
4)
5)
6)

[ArmoCaster77]

Hello -

I would be interested in a 6 cavity

Armocaster77 - (1) six cavity brass mold, No Handles, Normal Shipping, armocaster77 at gmail dot com 01906 zip code

On another note - has there been any interest in the past to do a version of this with a crimp groove somewhat similar to H&G 16 for use in 45APC, 45AR or 45LC revolvers? I have been using a Lee 452-228-1R mold and crimping into the top lube groove, works great, except the tiny lower lube groove I am left with is hardly adequate for proper lubrication in many applications - no one seems to have a replica, modified or modern version of a H&G 16 - not sure if there is any interest?

Thank you!

[GoodAlloy]

Please put me down for 4 cavity hollow point

[Lakehouse2012]

Armocaster,

I had made mistake when I copied over the format from a previous GB. This one wont be able to .put 6 cavities in the brass block. I am checking with Miha on the aluminum if that would be of interest?
Hello -

I would be interested in a 6 cavity

Armocaster77 - (1) six cavity brass mold, No Handles, Normal Shipping, armocaster77 at gmail dot com 01906 zip code

On another note - has there been any interest in the past to do a version of this with a crimp groove somewhat similar to H&G 16 for use in 45APC, 45AR or 45LC revolvers? I have been using a Lee 452-228-1R mold and crimping into the top lube groove, works great, except the tiny lower lube groove I am left with is hardly adequate for proper lubrication in many applications - no one seems to have a replica, modified or modern version of a H&G 16 - not sure if there is any interest?

Thank you!

Sent from my SM-G950U using Tapatalk

[Lakehouse2012]

Armocaster,

I had made mistake when I copied over the format from a previous GB. This one wont be able to .put 6 cavities in the brass block. I am checking with Miha on the aluminum if that would be of interest?

Sent from my SM-G950U using TapatalkAmmoCaster - I talked with Miha, we can do 6 cavity in aluminum. Are you interested?

Sent from my SM-G950U using Tapatalk

[ArmoCaster77]

Hello Lakehouse, Yes - that would be fine - 6 cavity in Aluminum - Thanks!

[Lakehouse2012]

Hello Lakehouse, Yes - that would be fine - 6 cavity in Aluminum - Thanks!Great, I've added you to the list. Thanks!

Sent from my SM-G950U using Tapatalk

[Lakehouse2012]

454 cast, will get you many different rounds, who is interested?

Sent from my SM-G950U using Tapatalk

[Lakehouse2012]

I know there are many of you with 45's that are looking for plinking as well as small game with a pistol.... its a proven design, last GB had more than 50 buyers!

Sent from my SM-T580 using Tapatalk

[Law.man]

I would take one as well, brass 4 cavity solid, with handles.
worgen.wiki@gmail.com

On a side note - I just found this thread by accident, I don't usually read this section. I think once this moves to Active Buys, orders will come pouring in.

[Lakehouse2012]

Sorry Lawman- I'm REALLY behind on some of my GB's.... I've added you in. And yes, I agree that in "discussion" they dont always get as much traction, but with this "bump" it will help.


I would take one as well, brass 4 cavity solid, with handles.
worgen.wiki@gmail.com

On a side note - I just found this thread by accident, I don't usually read this section. I think once this moves to Active Buys, orders will come pouring in.

[Law.man]

Interesting, I just found out the Miha has this exact same mold on his website (only in 4 cav HP though), says 27 units in stock. So I think I'll just order it directly from there, feel free to scratch me off the list.

https://www.mp-molds.com/e-shop/molds/hollow-points-molds/mp-452-374-hollow-point-4-cav-brass-mold

[Ronic]

I've been wanting this mold for over a year, I'll take a 4 cav HP.

[Lakehouse2012]

I've been wanting this mold for over a year, I'll take a 4 cav HP.

Hi Ronic, I've put you on the list, but had to grab your email from another post, do I have it right?

[Wasalmonslayer]

Hello Lakehouse

Could you put me down for a 6 cavity aluminum solid please. Normal shipping is fine.
Max at yvmarine dot com.

Thanks
Waslayer

[jmort]

How about a NLG ?????
That would make for a nice coated HP
Thanks

[Lakehouse2012]

:) Thanks Sir, I've added you to the list!


Hello Lakehouse

Could you put me down for a 6 cavity aluminum solid please. Normal shipping is fine.
Max at yvmarine dot com.

Thanks
Waslayer

[Lakehouse2012]

Hi Mort, sure I'll add you for a NLG, which flavor would you like?


How about a NLG ?????
That would make for a nice coated HP
Thanks

[Cue]

You can put me down for a 6 cavity NO lube groove/smooth side for Hitek coating aluminum one with DHL shipping.

Hcues1 at aol dot com

[Wasalmonslayer]

Lakehouse

Any chance we could spec a smaller diameter??
I would like it to drop at .452.

[jmort]

Hi Mort, sure I'll add you for a NLG, which flavor would you like?

4 Cavity HP all pins
NLG
middle earth sales and service at g mail dot com
Thank you, very accommodating

BTW, if a .452" is offered that would be nice.

[Lakehouse2012]

You can put me down for a 6 cavity NO lube groove/smooth side for Hitek coating aluminum one with DHL shipping.

Hcues1 at aol dot com

I've got you down Cue, Thank you!

[Lakehouse2012]

Let me verify with Miha Waslayer. Hopefully have you feedback in a few days. :)


Lakehouse

Any chance we could spec a smaller diameter??
I would like it to drop at .452.

[Lakehouse2012]

4 Cavity HP all pins
NLG
middle earth sales and service at g mail dot com
Thank you, very accommodating

BTW, if a .452" is offered that would be nice.

I've added you jmort, and put your note for the .452. I'll update the first post, once Miha gives me some feedback.

[Ronic]

Hi Ronic, I've put you on the list, but had to grab your email from another post, do I have it right?

Yep, that's right

[oldhenry]

Put me down for a 6 cavity aluminum w/grease groove (the .454 dia. is OK with me)

HHWADKINSIII at aol dot com

Thanks,
Henry

[jmort]

Hi Mort, sure I'll add you for a NLG, which flavor would you like?

Really liking these group buys
Thank you once again.

[oldhenry]

Put me down for a 6 cavity aluminum w/grease groove (the .454 dia. is OK with me)

HHWADKINSIII at aol dot com

Thanks,
Henry

Lakehouse,
Be sure to add me to the list.
Thanks,
Henry

[Lakehouse2012]

Lakehouse,
Be sure to add me to the list.
Thanks,
Henry

Hi oldhenry, thanks for the reminder. I've added you to the list!
Merry Christmas!

[Lakehouse2012]

Bumping this one, been a few weeks.

[autodidact]

Please include me for the following two identical molds:

(autodidact) - jbpaul at suddenlink dot net - 4 cavity brass solid, NLG, .452", zip 71111
(autodidact) - jbpaul at suddenlink dot net - 4 cavity brass solid, NLG, .452", zip 71111

Thanks,
JB

[Lakehouse2012]

Please include me for the following two identical molds:

(autodidact) - jbpaul at suddenlink dot net - 4 cavity brass solid, NLG, .452", zip 71111
(autodidact) - jbpaul at suddenlink dot net - 4 cavity brass solid, NLG, .452", zip 71111

Thanks,
JB

Thanks Sir, I've got you on the list, this one is starting to gain traction! :)

[starreloader]

I will take 2 of the 6-Cav, lube grove with bevel base aluminum solid moulds.. 454 is okay with me.

kdcartridge @ HOT MAIL dot COM

[Lakehouse2012]

Thanks Star, I've got you down for 2 molds.


I will take 2 of the 6-Cav, lube grove with bevel base aluminum solid moulds.. 454 is okay with me.

kdcartridge @ HOT MAIL dot COM

[jmort]

How about one more please

(jmort) - middle earth sales and service at g mail dot com - 4 Cavity HP all pins, No Lube Groove, .452"

[Lakehouse2012]

How about one more please

(jmort) - middle earth sales and service at g mail dot com - 4 Cavity HP all pins, No Lube Groove, .452"Thanks Sir, I've added you to the list.

Sent from my SM-G920V using Tapatalk

[Lakehouse2012]

I forgot to put myself into this one, so here is a shameless bump for a 4-cav HP at .454" I know the email :)

[Cue]

I was told by him on Facebook that he would be making the 6 cavity no lube groove mold soon so I am bumping this back up for that mold. If you want the 4 cavity hollow point mold it looks like it is available to purchase now from his site.

[Lakehouse2012]

Guys- Cue brought up an issue. Actually Miha has the 4-cav brass available as a Solid, but he listed it under his HP category. So he has 14 available of the 4-cav solid.

Here is what I'm going to do and this will be tricky cause it's hard to get everyone aligned on this type of move, but I'm going to strip out the 6-cav aluminum to a new thread, run it with and without lube grooves as a solid only. This seems to be a faster turnaround.

AND because its an existing cherry, only needs 10 to get into active...




I was told by him on Facebook that he would be making the 6 cavity no lube groove mold soon so I am bumping this back up for that mold. If you want the 4 cavity hollow point mold it looks like it is available to purchase now from his site.

[Lakehouse2012]

Miha has asked me to close this one while he figures out what his stock is and if the NLG molds are correct.

Sent from my SM-G920V using Tapatalk

[Lakehouse2012]

This GB is now closed, Paypals coming shortly

[Lakehouse2012]

He will be invoicing these on Sunday, this was the info he gave me last night.

Sent from my SM-G920V using Tapatalk

[MiHec]

PayPals are out!
If you missing one send me PM

[autodidact]

Ordered 2 molds 4 cav solid in brass.

Received 2 molds 6 cav solid in aluminum.

Did the 4 cav brass solid molds get cut or was that choice eliminated when the thread was split?

[Lakehouse2012]

Auto- I just checked the other thread, I was afraid I messed it up. Your 2 molds are listed as solid brass, 4-cav and you are NOT listed in the 6-cav aluminum in the other thread: http://castboolits.gunloads.com/showthread.php?381660-CLOSED-RERUN-MP-452374-(Lyman)-6-cav-alum-Solid-ONLY

This GB was a tough one, cause Miha was swamped with work and missed this when he was stocking his shelves. Will you please reach out to him directly and explain, Im sure he will make it right. PM him on here or send an email directly.

Sorry this happened to you,

LH2012


Ordered 2 molds 4 cav solid in brass.

Received 2 molds 6 cav solid in aluminum.

Did the 4 cav brass solid molds get cut or was that choice eliminated when the thread was split?

[autodidact]

Sent Miha a PM. Thanks for the reply.



Auto- I just checked the other thread, I was afraid I messed it up. Your 2 molds are listed as solid brass, 4-cav and you are NOT listed in the 6-cav aluminum in the other thread: http://castboolits.gunloads.com/showthread.php?381660-CLOSED-RERUN-MP-452374-(Lyman)-6-cav-alum-Solid-ONLY

This GB was a tough one, cause Miha was swamped with work and missed this when he was stocking his shelves. Will you please reach out to him directly and explain, Im sure he will make it right. PM him on here or send an email directly.

Sorry this happened to you,

LH2012

[jmort]

I would give up my left nose-hairs to get my HPs
This is the bullet I need bad
But, my left nose-hairs are safe
I wait
That is the deal

[Lakehouse2012]

I would give up my left nose-hairs to get my HPs
This is the bullet I need bad
But, my left nose-hairs are safe
I wait
That is the dealThey are in route, i got mine delivered yesterday

Sent from my SM-G920V using Tapatalk

[ranger391xt]

Were there any overruns on this one? I sent MiHa a PM a week ago and haven't heard from him. Thought I'd post here as well.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[Lakehouse2012]

Were there any overruns on this one? I sent MiHa a PM a week ago and haven't heard from him. Thought I'd post here as well.

Sent from my SAMSUNG-SM-G891A using TapatalkIm sure there are, check his website and you can order it direct.

Sent from my SM-G920V using Tapatalk

[Law.man]

Interesting, I just noticed I received an invoice from MIHA about a month ago for this mold. However, I asked to be dropped out of this GB on 10-25-2018, since I ordered this mold directly from MIHA's site. Interestingly enough, I still seem to be present in the GB list. So it would seem there just might be at least one extra mold :)