cbashooter
07-17-2018, 08:08 PM
The gun is no longer available now the components are up separately -
1000 CCI primers two different lots of 500, 80 Hornady 750g Amax bullets, half of them are in the original boxes others in an ammo box. 100 or so South African ball bullets. CBE nearly 1000 grain bullet mold with handles. 6 or 700 gas checks. Lee 510 push through sizing die. Lee nrw unopened box 50 BMG Reloading Kit. And I believe a Lee cutter and lock stud trimmer setup. And 95 once fired magtech brass cases.
I am fairly certain I can ship the primers via UPS as a non FFL. If I cannot do that we will have to figure something else out.
I would take $500 shipped for it all. That's just about the cost of the primers everything else is basically free.
The brass CBE bullet mold is a special order mold over $150, $160 worth of a max bullets,$250 for the Lee set up and $100 for the ball bullets,checks and sixer $65,the brass $50
1000 CCI primers two different lots of 500, 80 Hornady 750g Amax bullets, half of them are in the original boxes others in an ammo box. 100 or so South African ball bullets. CBE nearly 1000 grain bullet mold with handles. 6 or 700 gas checks. Lee 510 push through sizing die. Lee nrw unopened box 50 BMG Reloading Kit. And I believe a Lee cutter and lock stud trimmer setup. And 95 once fired magtech brass cases.
I am fairly certain I can ship the primers via UPS as a non FFL. If I cannot do that we will have to figure something else out.
I would take $500 shipped for it all. That's just about the cost of the primers everything else is basically free.
The brass CBE bullet mold is a special order mold over $150, $160 worth of a max bullets,$250 for the Lee set up and $100 for the ball bullets,checks and sixer $65,the brass $50