View Full Version : Lee 6 hole spru plate screw backing out..fix?
11-28-2005, 03:20 PM
What is the fix for a spru plate retaining screw that wants to back out on a Lee six hole mold. It has some kinda lock washer under it, but it seems to be useless.
11-29-2005, 02:44 PM
You can side drill the threaded hole and put in a set screw.
Or, much easiler, you can use a little wee bitty dab of green locktite -- the kind that will come undone later with a little heat and a little "gunt" worth of counter-clockwise wrench torque.
(it ain't no silly screw head, put a socket on it and loosen 'er on up anyway)
Powered by vBulletin® Version 4.2.1 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.