PDA

View Full Version : ACTIVE: Mihec .432/.434 Full Wadcutter PB/ GC 260gr -Cramer HP and Solid



bluejay75
06-26-2018, 06:45 PM
Mihec .432/.434 Full Wadcutter PB ONLY 260gr -Cramer HP and Solid

Click to expand. 44 will run and close, then the 358, 45 and lastly...the 41.

222897

222878


45.2.1 Never fails to wow and deliver. Talk about under promise and over deliver. This is going to be a great series of Boolits. We need to vote to re-instate him.

Due to the nature of the cherry...this is only available in Plain Base.


This one will remain in Group Buy Discussions until we hit 12 commitments. We need 25 to put it into last call.

This one is currently being designed! When complete…it will be as pictured in and ready for self defense, close range hunting/ finishing game, small game and target applications This is a Boolit design is the go to Boolit will function well for 44 Special/ Magnum and 444 Marlin Single Shots. If youre expecting good function in a Levergun…this is not the Boolit. This is for max diameter for 44 caliber.
Weights are lubed and gas checked, ready to load. 260 gr. solid, 245-255 gr. hollow point.

Would be available in 2 and 4 Cavity Cramer HP, 4-cav Solid Brass, or 6-cav Solid Aluminum. (Choose PB ONLY)

Small, Large and Blank Hollow Point Pins available. Im going to ask for a shallow penta for this one.

It needs 10 buyers to commit to this thread before it goes active, and 20 buyers gets Miha cutting molds. Once the cherry is cut...It cuts all 4.

Features:

- Steel sprue plate
- Hardened steel alignment pins
- Allen keys are included
- RCBS/Lyman top punch is included
- Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +$20)
-Sample of sprue lube is included (15ml)

Weights, ready to load:

Solid 245 gr PB 215-235 HP


Diameters:
.432 or .434

Prices are with shipping included, below.
- 2 Cavity Hollow Point Brass - 95 Euro's (80,75 Euros with discount)????? NEED TO CONFIRM
- 4 Cavity Hollow Point Brass - 135 Euros (114,75 Euros with discount)
- 4 Cavity solid Brass 95 Euro's (80,75 Euros with discount)
- 6 Cavity solid Aluminum 95 Euro's (80,75 Euros with discount)


GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

Please list your info in the following way: (user name) (disguised email) (type of mold) (zip code)

2 cavity HP (PB)
1)mjones23atnebdotrrdotcom- -HP- 0.432- 2 cavity PB
2)jtcarm at charter dot net- -HP- 0.432- 2 cavity PB
3)alamogunr AT charter DOT net -HP- 0.432- 2 cavity PB
4)Big Bore Nut greggoryashley at yahoo dot com-HP- 0.434- 2 cavity PB
5)
6)

4 cavity HP (PB)
1)shutupandjump at yahoo dot com-HP- 0.434- 4 cavity PB
2)webb (a) teamWebb (d) net - 0.434- 4 cavity PB
3) j _ Bownes at yahoo dot com-HP- 0.434- 4 cavity PB
4)vfluckey at midco dot net -HP- 0.432- 4 cavity PB 57110- DHL
5)JoeGravelle at hotmail dot com-HP- 0.432- 2 cavity PB
6)rwhyte at wi dot rr dot com-HP- 0.432- 4 cavity PB-53120
7)william dot kinderknecht at gmail dot com-HP- 0.432- 4 cavity PB+ SET OF HANDLES
8)gspatton at gttransmissions dot com-HP- 0.434- 4 cavity PB
9)gamsek AT iCloud DOT com -HP- 0.432- 4 cavity PB
10)krflff2atdejazzddotcom -HP- 0.432- 2 cavity PB
11)reddhawkk eagle-rainATcoxDOTnet-HP- 0.432- 2 cavity PB- 06096
12)evoevil...at...aol...dot ...com zip -HP- 0.432- 4 cavity PB- 20705
13)
14)
15)

4 cavity Solid, Brass mold with (PB)
1) redhawk357magATgmail.com- SOLID- 0.432- 4 cavity PB
2)
3)
4)
5)
6)

6 cavity Solid, Aluminum mold with (PB)
1)
2)
3)
4)
5)
6)

Beagle333
06-27-2018, 01:24 AM
I think my Pug would enjoy this one.....

4-Cav, HP, PB, .434 please.
shutupandjump at yahoo dot com

Plan_IX
06-27-2018, 02:34 PM
I'm in 4 cav, plain base, all pins .434 dia
webb (a) teamWebb (d) net

bluejay75
06-27-2018, 04:27 PM
I'm in 4 can, pb hp pins

Need your disguised email and diameter.

tradbear55
06-28-2018, 01:59 PM
I'm in for a 4 cav, HP, GC, .432 all pins.
blewrench 75 at g mail dot com

bluejay75
06-28-2018, 02:33 PM
Lets discuss pin Options.....I want a shallow Penta for this one. Imagine the normal sized penta pin cropped off to a flat in the center. Will still expand but not break apart. Oreo has made a similar pin in the past.

Your thoughts.

bluejay75
06-28-2018, 02:35 PM
I'm in for a 4 cav, HP, GC, .432 all pins.
blewrench 75 at g mail dot com

BLUEwrench??? Correct?

tradbear55
06-28-2018, 03:12 PM
Sorry, correct. bluewrench.

tradbear55
06-28-2018, 03:14 PM
I like the idea of a shallow penta. Would rather have expansion and more weight than have it break apart.

bluejay75
06-29-2018, 12:07 PM
Taken care of gents. 45.2.1 agreed to do this design so we will have some flexibility in the finished product.

I vote for 250 grains as a PB Solid. Should get it down to 235 with the biggest hollow point. Anyone else?

bluejay75
06-29-2018, 02:21 PM
Official drawing. This should be THE self defense boolit of choice!

If someone can figure out how to make the photo bigger please post.

tradbear55
06-29-2018, 03:14 PM
Must bow out, only in if its available in a gc design. Thanks.

bluejay75
06-29-2018, 03:38 PM
I understand. Thanks.

bluejay75
06-29-2018, 04:55 PM
Im going to ask him to make the mid size pin the shallow penta and narrow the HP to leave a little more meat on the Boolit and a little more weight What does the group think?

thraxx
07-03-2018, 12:12 PM
I'm going to bite on this one.

thraxx - vfluckey at midco dot net - 4 cav. HP, .423 - 57110

Jtarm
07-08-2018, 11:26 PM
Is there any history behind this design, i.e. does anyone know how stable the boolit would be?

bluejay75
07-08-2018, 11:45 PM
Is there any history behind this design, i.e. does anyone know how stable the boolit would be?

I shoot this boolit in an NOE design and in bought boolits from a member here (MAtts Bullets...great Boolits BTW).

It is stable with a full charge of 231@1400 FPS from a carbine and ragged hole accurate out to 50 yards. Still looking like a group at 75 yards and barely holding to a paper plate at 100. For the purpose of close in SPLATTTTT!!!!! it suits the purpose well. All pistol self defense ranges and varminting camp range from a rifle.

thraxx
08-04-2018, 03:29 PM
I'd like to add the DHL shipping to my order. thanks!

thraxx
08-26-2018, 12:40 PM
bump.

because I'd really like to see this one made!

thraxx
09-29-2018, 09:37 PM
bump again.

bluejay75
09-29-2018, 10:46 PM
Thraxx... these are all cut from the same cherry. I’m going to try to run the 358 FWC and see if I can get 25. Then I will come back and grab this one. Next week.

thraxx
10-01-2018, 12:08 PM
Thraxx... these are all cut from the same cherry. I’m going to try to run the 358 FWC and see if I can get 25. Then I will come back and grab this one. Next week.

ok, I didn't know those were all from the same cherry. I just didn't want this one to fade out. I'm interested in the .45, too.

Law.man
10-31-2018, 01:59 AM
I'll play...4 cav HP .432 AND a set of handles. I like the idea of shallow penta pin.

worgen(dot)wiki(at)gmail(dot)com

Law.man
01-14-2019, 03:50 AM
Come on guys, let's show some love for this bad boy!

bluejay75
01-14-2019, 01:51 PM
My NOE version turned a yearling does head to mush...FYI. @1400 FPS

Beagle333
01-28-2019, 03:33 PM
Run it, run it! [smilie=s:

phaessler
01-30-2019, 09:08 AM
Going broke with all this fun stuff....Thank you

pdhaessler618 at gmail dot com - 2 Cavity HP Brass

phaessler
02-09-2019, 02:13 PM
Is this a dead buy?

thraxx
02-09-2019, 06:44 PM
I hope not. I know Mr. Bluejay was talking about taking a break from honcho-ing on another buy, so I dont know what will happen to this one.

Hopefully he stops by and lets us know.

phaessler
02-24-2019, 06:29 AM
I would assume its all done....

bluejay75
02-24-2019, 06:47 AM
I thought this one would go the distance....you just never know sometimes.

Jtarm
02-25-2019, 03:19 PM
Ok, put me down for a 2-cavity HP brass .432.

jtcarm at charter dot net.

BTW, make that the small HP.

bowfin
03-05-2019, 01:56 PM
Please put me down for a 2 cavity Hollow Point Brass mold

mjones23atnebdotrrdotcom.

thraxx
04-06-2019, 08:43 PM
There's 3 names missing from the list... we just need a few more.

RedHawk357Mag
04-23-2019, 01:42 AM
Four cavity, brass, PB, .432" SOLID.
redhawk357magATgmail.com
Thank you.

Sent from my XT1650 using Tapatalk

bluejay75
04-23-2019, 06:36 AM
Just a few more and this one goes live. Great thing is it only takes one cherry to cut all calibers.

thraxx
04-23-2019, 07:24 AM
Just a few more and this one goes live. Great thing is it only takes one cherry to cut all calibers.

How do I get the .454 version as well?

Jtarm
05-14-2019, 04:10 PM
Cmon, 2 more and we move up to the big leagues.

bluejay75
05-14-2019, 09:33 PM
MIHEC says this can run at 20 total because they are all off the same Cherry. This is now active.

Law.man
05-15-2019, 03:12 AM
Please change mine to 4cav solid .432, no handles (worgen(dot)wiki(at)gmail(dot)com).

Thanks!

mart
05-20-2019, 09:04 PM
Shoot, you better count me in for a 4 cavity HP mold. If my wife knew how much I've spent on MP molds over the last several years she'd have a cow. Of course I'll have to get one in each of the calibers as they become available. It never ends.

marty dot weatherup at yahoo dot com

Law.man
05-21-2019, 02:19 PM
Hello Bulejay, I hate to be that guy, but can you scratch me off this one (for now) please? Something has come up and the cash is needed elsewhere...I don't wanna commit to something unless I know I got the money safely set aside.

ohnomrbillk
05-28-2019, 10:06 PM
4 cavity HP (PB)
william dot kinderknecht at gmail dot com-HP- 0.432- 4 cavity PB+ SET OF HANDLES

bluejay75
06-16-2019, 08:20 PM
4 cavity HP (PB)
william dot kinderknecht at gmail dot com-HP- 0.432- 4 cavity PB+ SET OF HANDLES

Got you down Mr. K.

We are inching closer to finishing this one. Miha agreed to run it at 20. Im sure the HP pins for the 44 and 45 will be the same so I will ask him to order for both sizes. Look at this like an Ogival Wadcutter that bore rides. Should be a good one.

Dr-Greg
06-21-2019, 12:22 AM
Vote to re-instate 45.2.1 ? What happened to him?

phaessler
06-21-2019, 07:11 PM
bluejay75, please edit my email to " haesslerpd618 AT gmail DOT com" thank you very much.

gtgeorge
06-26-2019, 09:58 PM
gspatton at gttransmissions dot com-HP- 0.434- 4 cavity PB

Gamsek
07-06-2019, 02:37 PM
Gamsek

gamsek AT iCloud DOT com

4cavity brass PB HP, .432

dkf
07-06-2019, 07:15 PM
krflff2atdejazzddotcom -HP- 0.432- 2 cavity PB

midnight
07-06-2019, 09:44 PM
I'm in for a: four cavity HP PB all pins, .432 rwhyte at wi dot rr dot com

My handle here is midnight. The instructions say zip code so even though no one else has given one, here it is: 53120.

alamogunr
07-06-2019, 11:31 PM
Put me down for one 2 Cavity Hollow Point Brass. I'm assuming that I will be able to cast solid also.

alamogunr AT charter DOT net

mart
07-13-2019, 01:13 PM
better drop me off this on. I'm getting packed up to move and found 44 molds I haven't even used yet. Need to use the ones I've got. Thanks. marty dot weatherup AT yahoo dot com

JoeG52
07-13-2019, 04:25 PM
Put me down for one: 4 cavity HP PB all pins .432 JoeGravelle at hotmail dot com

phaessler
07-13-2019, 08:03 PM
Please remove me from this buy.

haesslerpd618 AT gmail DOT com

Thank you

reddhawkk
07-14-2019, 09:50 PM
reddhawkk eagle-rainATcoxDOTnet HP 2-cavity 0.432 06096

JoeG52
07-15-2019, 06:28 PM
Please change this to 2 cavity instead of 4.
5)JoeGravelle at hotmail dot com-HP- 0.432- 4 cavity PB

bluejay75
07-28-2019, 09:12 PM
Please change this to 2 cavity instead of 4.
5)JoeGravelle at hotmail dot com-HP- 0.432- 4 cavity PB

DOne sir...

big bore nut
08-29-2019, 11:35 PM
I'll take a 2 cavity H P .434 dia if available. Big Bore Nut greggoryashley at yahoo dot com

JoeG52
09-27-2019, 08:53 PM
There has to be at least 20 more boolit casters that need this mold !

evoevil
10-06-2019, 05:05 PM
4 cavity HP PB all pins .432 evoevil...at...aol...dot ...com zip 20705