WTS; 1-1/2 x 20x Unertl, Lilja blank 6.5mm

[kootne]

20x Unertl with 1-1/2" diameter objective, 3/4" tube.
Serial #46624
Blueing shows light wear where the three pads of the rear mount track, it appears to maybe have been mounted in a couple locations. There is also couple scratches on the section that tapers from 1-1/2" to 3/4". The rest of the blue looks quite good. Mounts have the Lyman "eyebrow" type retention screws. It is missing the rear threaded lens cap.
$750.00 plus shipping.

6.5 Lilja barrel blank, stainless steel, 8" twist, 28" OAL, 1.1" diameter, no taper.
One end marked Lilja, 264, 8, and S on 90 degree intervals.
The other end is marked 1195. This end has a band saw cut part way in about .6" from the end that would limit diameter to about 1", I am not familiar with Lilja to know if that is the muzzle end. If it is, it should probably be trimmed back anyway. If it's the chamber end, it should go away when the shank is cut.
The guy that had this got it to put on a Highwall but never got around to it.
SPF to Preacher Jim

first firm "I'll take it" and PM beats all offers, dickers, & tire-kickers.
Thanks for looking,
Dennis

[Preacher Jim]

Pm for Lilia. 264 barrel

[kootne]

Sold the barrel, thanks Jim.

[jem102]

Can you post some pics of the scope?

[kootne]

Lets see if a picture actually shows up. This type of technology is not my gift.
221253
Well, there it is, I will attempt a few more.
Thanks jem102 for the prompting.

[kootne]

221254221255221256
Trying to show blue wear from mount in 2nd shot,
Showing scratch in 3rd shot

[kootne]

221257221258221260

[ctrn469]

have you used this scope in the past? just checking if you have had it mounted

[kootne]

have you used this scope in the past? just checking if you have had it mounted

No, I haven't had this scope on a rifle. Wouldn't be hard to do, any thing in particular you are wondering about?

[kootne]

bumped up