View Full Version : WTB Makerov stuff
After a really rough week which involved a bunch of funerals, my wife decided I needed to start casting and reloading to get my mind off things, well I realized I don’t have ANYTHING for my Makerovs no molds, cases, dies anything. So if you have any spares I would be thankful for you to sell them to me!!
Thanks 43PU
billyb
05-15-2018, 01:23 PM
PM inboune
mooman76
05-15-2018, 01:23 PM
Cast should be fine but reloading when you have other things on your mind is not a good idea. That's when mistakes happen and that could turn out very bad. Sorry about your funeral stuff though.
Grmps
05-15-2018, 02:24 PM
One tip, make you own Makarov brass out of nickel 9s19 brass, it makes life so much easier when you go to separate 9x19 from 9x18.
Virginia John
05-15-2018, 03:00 PM
I may have a Makarov 2 cavity mould, if you are interested.
azrednek
05-18-2018, 11:53 PM
One tip, make you own Makarov brass out of nickel 9s19 brass, it makes life so much easier when you go to separate 9x19 from 9x18.
I tried going that way but discovered nickel 9MM brass not that common. I use marking pens on Mak and 380 headstamp but have to remember to separate before dumping in the tumbler.
Grmps
05-19-2018, 12:56 AM
patience, I traded for and bought 0ver 1000 nickel cases on this forum. Any nickel 9x19 I find gets turned into 9x18.
azrednek
05-19-2018, 01:48 AM
patience, I traded for and bought 0ver 1000 nickel cases on this forum. Any nickel 9x19 I find gets turned into 9x18.
Smart move on your part. Me being a cheapskate with a bucket full of 9MM brass never would have thought about that.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.