Rich22
04-28-2018, 07:09 PM
Found some boxes of bullets while cleaning out the garage shelves.
155gr 30 cal Spire pt Bullets
I will split these up into two lots
SPF1. (655) HiTek coated , Approx 80% bronze 20% Black, all with 3 coats, Unsized 45.00 Shipped
SPF2 (565) Powder coated with Smoke's Blue, Unsized, measured several and all are .3115-.312 so I am unsure of their suitability for running in an AK (I have never loaded 7.62x39 or had an AK) 40.00 Shipped
SPFAll for 80.00 Shipped
SPF 155gr 9mm RNFP
Approximately 925 bullets. All coated in 3 coats of HiTek Bronze, unsized 55.00 Shipped
Lee Classic Cast Press
This has been modified by the inclusion of a Hornady bushing adapter to allow it to use dies with the Hornady bushing system so they can be inserted and removed without adjustment.
http://usa.palmettostatearmory.com/hornady-lock-n-loadr-bushing-press-conversion-044095.html?gclid=CjwKCAjwt5DXBRAtEiwAa3vyEvCEYjPK VnaS3igZ7OpTy2gZdO5RPjx4rqyZa48Aeck7_4IVEHhDmxoCDZ 8QAvD_BwE
The Press
https://leeprecision.com/classic-cast-press.html
Standard press, have not really used this much since I got my Progressive.
I will include a 9mm shellholder and a 223 shellholder.
80.00 Shipped
I accept MO and PP F&F or + fee. No trades at this time. Any questions, feel free to ask
Thank you
219478219479
155gr 30 cal Spire pt Bullets
I will split these up into two lots
SPF1. (655) HiTek coated , Approx 80% bronze 20% Black, all with 3 coats, Unsized 45.00 Shipped
SPF2 (565) Powder coated with Smoke's Blue, Unsized, measured several and all are .3115-.312 so I am unsure of their suitability for running in an AK (I have never loaded 7.62x39 or had an AK) 40.00 Shipped
SPFAll for 80.00 Shipped
SPF 155gr 9mm RNFP
Approximately 925 bullets. All coated in 3 coats of HiTek Bronze, unsized 55.00 Shipped
Lee Classic Cast Press
This has been modified by the inclusion of a Hornady bushing adapter to allow it to use dies with the Hornady bushing system so they can be inserted and removed without adjustment.
http://usa.palmettostatearmory.com/hornady-lock-n-loadr-bushing-press-conversion-044095.html?gclid=CjwKCAjwt5DXBRAtEiwAa3vyEvCEYjPK VnaS3igZ7OpTy2gZdO5RPjx4rqyZa48Aeck7_4IVEHhDmxoCDZ 8QAvD_BwE
The Press
https://leeprecision.com/classic-cast-press.html
Standard press, have not really used this much since I got my Progressive.
I will include a 9mm shellholder and a 223 shellholder.
80.00 Shipped
I accept MO and PP F&F or + fee. No trades at this time. Any questions, feel free to ask
Thank you
219478219479