Who is happily casting for M&P?

[adam_mac84]

I spent last year making glock 9mm work. Now returning back to my M&P line. Got rid of my G34 and got the 5” 2.0.

Been shooting .357 with Smoke PC because that is the biggest that will fit in the throat and is .002 over groove best I could measure. Shot 300 today for practice. Do get some minor leading but for the cost of casting reclaimed scrap I am happy.

I may go to a deep seated .358 1.040-1.045. Shooting WSF, HP38 and TG powders.

Has anyone made the magic pill for these yet?

Ran alloys from ACRS (similar to 20:1) to WC COWW. I am ok with a small bit of chore boy work at the end of the day.


Sent from my iPhone using Tapatalk

[camp]

I own 2 m&p 9's and a 40, i run straight clipon WW PC'ed through all 3 of them for idpa/ steel. No problem and on the steel i may shoot 400 rds a match. Nothing but a clean barrel at the end

[asmith80]

I had DougGuy throat the barrel on my M&P, so I can do .358 out as far as I like. I was loading out boolits from the Accurate 35-130Z mold to 1.14 OAL and a 135 PF with Bullseye. Clipon WW with 2% Tin. Hi-Tek coated. No leading