VS: Patmarlins HUGE Checkmaker factory Blems Shop Cleanup Sale

[PatMarlin]

... :Fire:

[BrassMagnet]

I'll take one of these:

22PB cal

[jessdigs]

30 cal gas check and 22 cal gas check I'll take one of each
Rcbs rockchucker
Payment via PayPal
PM sent
Sent from my Pixel XL using Tapatalk

[missionary5155]

Good afternoon I will buy these..

40/10mm PB
41 PB
44PB
For RCBS Rockchucker.
PM follows.. will ship to ILLinois. God bless you and your family. Mike in Peru

[Beerd]

I could use a 35PB with an RCBS ram ejector arm.
PM inbound.
..

[Time Killer]

I will take a 30 cal 30pb and a 35 cal pm inbound

[38splpete]

I'll take a .30 PM follows

[BrassMagnet]

I'll take one of these:

30PB cal

[Minerat]

I'll take one of the 45 cal. Forgot to state for RCBS ram in PM.

[shooter bob]

pat i would like a 44 cal with the lee ejector arm. Thanks for the great deal!

[rancher1913]

if you have a 30cal and a 35cal left, I would love one of each.

[deac777]

I will take one of the 45 cal, with a RCBS ejector

[BrassMagnet]

Combining two previous posts and adding type of ejector requested.

22PB cal
30PB cal
RCBS ejector

[lobopete]

If available
1-44cal
1-45cal
Lee ejector

[PatMarlin]

.. :Fire:

[PatMarlin]

.. :Fire:

[PatMarlin]

.. :Fire:

[PatMarlin]

Getting CB order process organized here.

If you received an email invoice that was incorrect, please email back and I'll get it fixed.

Thanks,

Pat

[PatMarlin]

.. :Fire:

[7br]

I will take a .22 cal check maker.

[evoevil]

1-44 and 1-45 cal 1-30 cal "LEE Classic Cast Single for 50 BMG" It comes with both shell holders, standard and 50
chuck

[Big Ben]

PM on the way...

[mold maker]

I'd like the 41 cal die with RCBS tooling.

[mold maker]

Pat, I forgot the email addy.
alice jerry at charter dot net
mm

[evoevil]

Do you have one for 500 S&W. Do you carry the copper sheets, I didn't see them on your website
Chuck

[PatMarlin]

Hi Chuck,

I do offer a 50 cal for a gas check shank mold, but it requires a modification to your mold to be able to run .014" metals. I no longer sell metals. Please check my post here in the Vendor Sponsor section for links to my website on answers to metals and more here:

http://castboolits.gunloads.com/showthread.php?357897-What-is-Patmarlins%99

[PatMarlin]

.. :Fire:

[PatMarlin]

.. :Fire:

[PatMarlin]

.. :Fire:

[PatMarlin]

.. :Fire:

[KSUJedi]

1 50PBP and 1 35PB please. PM inbound

[PatMarlin]

Thanks everybody!

Response has been great.

We're running machines... Pat :Fire:

[PatMarlin]

.. :Fire:

[PatMarlin]

.. :Fire:

[mold maker]

deleted

[mold maker]

deleted

[Minerat]

bump tt

[evoevil]

Pat, do you have any timeline these will ship
chuck

[PatMarlin]

...Pat :Fire:

[Minerat]

Thanks for the update Pat. Was getting curious too.

[evoevil]

Thanks Pat.

[Minerat]

Pat,

Just checking on when you think the shipping date will be so I can plan to obtain a few 45 gc's to get me by till then if it is going to be a while yet.

Regards,

Steve

[PatMarlin]

Hi Steve,

Your's is leaving today or tomorrow... It's on the cart right now with label on the bench.

Pat

[PatMarlin]

.. :Fire:

[rancher1913]

what is time estamate for shipping mine.

[Minerat]

Thanks Pat, got your email today.

[BrassMagnet]

OK. I hate being a whiny little PITA.
Any idea on when these will ship?


Items:

Checkmaker Dies (Blems)
22PBcR
30PBcR

[woody290]

Hi Pat, are you still running the sale? I just got back on the site as have been too busy. I would be looking for 22 cal and 30 cal GC's.
Thanks
Chuck

[PatMarlin]

.. :Fire:

[PatMarlin]

.. :Fire:

[Minerat]

Pat,

FYI I got mine today, a day earlier then the USPS projected. Looks great and in good shape with all parts including extra set screw accounted for. But the plastic box took a hit from the rough handling, not a problem for me thought I can fix it.

[jessdigs]

Thanks for shipping update. Mine shipped today. And I just scored a large vintage paper cutter on offer up to use.

Sent from my Pixel XL using Tapatalk

[PatMarlin]

Score on the paper cutter. They are worth their weight in gold. I use my old American Made for so much daily.

[PatMarlin]

Good deal Steve.

[BrassMagnet]

OK. I hate being a whiny little PITA.
Any idea on when these will ship?


Items:

Checkmaker Dies (Blems)
22PBcR
30PBcR

Arrived today and they sure do look good!

[Minerat]

Hey Brass they work good too!

[Tyguy95]

Got em today can't wait to test them out

Sent from my SM-G930VL using Tapatalk

[PatMarlin]

Awesome...!

[shooter bob]

My check maker came Saturday thanks pat.Sorry for not posting sooner been busy. I will say if it is blemished i sure cant tell !Thanks again Pat

[PatMarlin]

.. :Fire:

[PatMarlin]

Pat ... :Fire:

[The_Jerkman]

I am definitely going to need one of these come end of July

Sent from my SM-G935V using Tapatalk

[autopilotmp]

How do we know when you have shipped our order?

[PatMarlin]

.. :Fire:

Pat

[Lakehouse2012]

I'd like one in .45 for 45-70.

PM sent

Thanks.

Sent from my SM-G950U using Tapatalk

[PatMarlin]

Awesome LH...

[KSUJedi]

Sorry, potentially dumb question, but what's the difference between "500 S&W Cal Pistol (.501)" and "50 cal"? Is "50 cal" for 50BMG?

[PatMarlin]

There both the same dies KS, just different names.

Both for 50 caliber pistol gas check shank molds.

[KSUJedi]

Ok, if still running the sale, I'd like to go ahead and get that 50 cal die, as well as a 44cal and 44PB cal. PM inbound

[PatMarlin]

.. :Fire:

[PatMarlin]

Here's some Info on my 50 Caliber dies for Gas Check Shank Molds:


50 Caliber Range Test with Checkmaker™ Gas Check Dies and Accurate Mold 50-420KG

http://castboolits.gunloads.com/showthread.php?359084-50-Caliber-Range-Test-with-Checkmaker%99-Gas-Check-Dies-and-Accurate-Mold-50-420KG&highlight=


Notes on dies for 50 Caliber

50 caliber dies

The standard (shank mold) .501 50 caliber pistol (500 S&W) etc., Checkmaker™ dies will only work with a modification to your mold. Standard 50 cal cast bullet shanks are designed to use .022 metal which is expensive.

I designed Checkmaker™ dies in standard 50 caliber (gas check shank molds) to work with inexpensive thinner metal. You need to order a 50 cal mold with a .473 shank, or have your mold shank opened up to .473. This way you can use inexpensive metals from .010 to .016 and the best performing .014 Amerimax Aluminum. Again- the 50 cal standard Checkmaker is not designed to make a gas checks with (expensive) .022 thick metals.

[Lakehouse2012]

Pat, can you confirm you received the check my wife sent your way? Im fine with waiting for the tool, i see from the posts you are very busy. Just want to be sure my order is in the que.
Awesome LH...

need:

Full Name (not Cast Boolit handle cause that's in the PM)
Email Address
Shipping Address

Checkmaker[emoji769] Die Caliber(s)
Ram Ejector Arm (RCBS or LEE Style) if you do not already own one

I will return an order invoice by email with payment instructions.

Shipping is free.

Sent from my SM-T580 using Tapatalk

[PatMarlin]

Yep... got it.

Thanks much,

Pat

[boman250]

PM sent!

[PatMarlin]

.. :Fire:

[sigep1764]

Thank you Pat. I understand the stress and frustration you are going through to some extent. Thank you for putting up with what I am sure is a constant barrage of emails. I know I contributed to that and your graciousness and patience is appreciated.

[PatMarlin]

.. :Fire:

[PatMarlin]

Oh... just looked and your 270 dies shipped Kyle (sigep1764).

Picked up yesterday I think. You should have gotten a tracking email.

Thanks for your business..!

[sigep1764]

Sure did Pat! Got the email at work today and am very excited!

[PatMarlin]

Awesome Kyle..!

[dg31872]

Pat, just sent a PM about a check maker in 32 H&R plain base.