Harter66
03-12-2018, 03:14 PM
I got this at a show , buy the one you want get them all thing .
It is an Ohaus 275- 58 M which is a 275 gr 58 cal Minnie styled SWC HB
I don't have nor foresee having a 58 cal ML .
This mould was a little bit scruffy when I got it home . It is however uncast .
There are a couple of heavy rust spots on the tab end of the sprue plate . Faces and cavity as well as the pin are clean .
This mould uses Lyman lg handle set so Lee's will work also .
I did disassemble and reassemble this mould for basic clean up and a little steel wool . It had a bath in Evaporust and Rem oil .
Asking $40 tyd .
216272
216273
216274
216275
I'd be interested in heavies in 7mm , 270 150gr FP and a 170-180gr 32/8mm RNFP suitable for 32 Rem/WS .
Singles , doubles , buy ups .
It is an Ohaus 275- 58 M which is a 275 gr 58 cal Minnie styled SWC HB
I don't have nor foresee having a 58 cal ML .
This mould was a little bit scruffy when I got it home . It is however uncast .
There are a couple of heavy rust spots on the tab end of the sprue plate . Faces and cavity as well as the pin are clean .
This mould uses Lyman lg handle set so Lee's will work also .
I did disassemble and reassemble this mould for basic clean up and a little steel wool . It had a bath in Evaporust and Rem oil .
Asking $40 tyd .
216272
216273
216274
216275
I'd be interested in heavies in 7mm , 270 150gr FP and a 170-180gr 32/8mm RNFP suitable for 32 Rem/WS .
Singles , doubles , buy ups .