Rowell Ladle

[AKtinman]

I prefer to use a dipper, or ladle, rather than bottom pour.

The best ladle I have found is the Rowell, which I bought from the Antimony Man. No connections to him except for being a happy customer.

http://www.theantimonyman.com/ladles.htm

[wills]

You can get the big ones here

http://www.advancecarmover.com/ladle.html

[Lee W]

Try here too,
http://www.buffaloarms.com/
I have the two pound ladle. It does make nice bullets, although I use the bottom pour pot more.

[Rrusse11]

I prefer to use a dipper, or ladle, rather than bottom pour.

The best ladle I have found is the Rowell, which I bought from the Antimony Man. No connections to him except for being a happy customer.

http://www.theantimonyman.com/ladles.htm

Ayup! I use the #2 for almost everything, and can't speak to highly of it,
or Bill Ferguson's service, and knowledge.
Cheers,
R*2

[BABore]

What are the sizes on the different Rowell ladels. I was thinking about buying one for pouring .458 400 gr and 475 380 gr bullets, but they all seemed to big. The #1 was listed as having a 1 lb capacity. Am I missing something. I'm just getting started (green) in to casting, starting to collect the necessary goodies.

[wills]

You may prefer a smaller ladle for casting. The rowels are probably better for smelting. You can get casting ladles from Lyman or RCBS.

Advance car movers manufactures the Rowell (I think) you can see the whole line of them at
http://www.advancecarmover.com/

[45 2.1]

What are the sizes on the different Rowell ladels. I was thinking about buying one for pouring .458 400 gr and 475 380 gr bullets, but they all seemed to big. The #1 was listed as having a 1 lb capacity. Am I missing something. I'm just getting started (green) in to casting, starting to collect the necessary goodies.

Get the #1 for your use, it holds plenty for big bullets and multiple cavity molds.