WTB Ideal bullet mold for 270 Caliber (280XXX)

[AlexAkai]

Looking to buy Ideal marked mold block in one of the below designs, PM me and we can work out a deal.

280411 Fine sharp pointed bullet for .270 Winchester for small game such as grouse and squirrel. (PB, SP, 138 – TP is 411)
280412 A fine bullet for target shooting up to 200 yards and for larger game. (GC, RN, 136 – TP is 468)
280473 Spitzer gas-check bullet, designed after the 311413 bullet. (GC, SP, 125 – TP is 473)
280642 Heavy 270 Winchester bullet with lube grooves on the nose for higher velocities. Nose must be lubed by hand. (GC, FN, 150 - TP is 641)
280468 Designed by H. Guy Louverin. Excellent results with target work up to 600 yards and fine on larger game. Furnished in 115 gr. ("L" 6 bands) or 105 gr. wt. ("S" 5 bands). NOTE: 105 gr. 5 bands, and the gas check will fit inside the 6.8mm neck [ed.] (GC, RN, 105, 115 – TP is 468)

AlexAkai

[maxreloader]

You know you have too many molds when you have the entire list that you copied and pasted the above molds from printed out and marked-up with the qty and cavities of the molds you own. I stapled them into 4 groups and they are very dirty these days. Good research!

[AlexAkai]

I get all my information at the link below

http://ps-2.kev009.com/ohlandl/Cast_Bullet/Ideal-Lyman_Molds/Ideal-Lyman_Mold_Descriptions.html