WTS: Hoch and Idea moulds

[douglasskid]

2.) Idea mould- 457406 with handles. Appears to be New, old stock. No box. $ 50. Shipped
Price reduced!!

[GrumpyBear]

What size bullet does the Hoch mold throw diameter and grains ?

And a picture would help me out.

[BrassMagnet]

What size bullet does the Hoch mold throw diameter and grains ?

And a picture would help me out.

The Hoch mould will be a nose pour mould casting at .459 and weighing 405 grains.

You will have to buy Hoch handles.

[GrumpyBear]

Thanks Brass Magnet. Darn things are hard to find information on.

[GrumpyBear]

I will take the Hoch mold 459405 with handles.

PM on it's way.

[douglasskid]

Hoch mould is SPF
THANKS

[Good Cheer]

3.) Idea mould- 456121 no handles. Appears to be New, old stock. No sprue plate. $35. Shipped

Sending PM.

[Good Cheer]

3.) Idea mould- 456121 no handles. Appears to be New, old stock. No sprue plate. $35. Shipped

Is this what it looks like?
212379
That's a variable length design so how many grooves it has determines the weight.

[ascast]

I'll take #3 if Goodcheer backs out pm coming

[douglasskid]

That appears to be the correct bullet in your picture.

[Good Cheer]

I'll take #3 if Goodcheer backs out pm coming

Go for it sir. I was hoping for one of the lighter weight versions.

[BrassMagnet]

Thanks Brass Magnet. Darn things are hard to find information on.

You will find it difficult to cast with. It will be difficult to get a nice base.
So pressure fill it! Hold it against your dipper or up against the pour spout on your bottom pour lead pot for a count of 3 to 5 before you pour the sprue. That will give you a good base. It took me a while to figure out how to get mine to work!

[GrumpyBear]

Thanks I appreciate the advice.

[WALLNUTT]

RCBS handles can be modified to work with Hoch molds. Maybe other handles but I've used the RCBS.

[GrumpyBear]

Money sent.

[douglasskid]

bump Hoch mould has been old