WTS presses metallic, shotshell & lube

[Skunk1]

Figured out the pictures problem I was having. Need to raise some funds for last weekends problems I had. As always, can provide more pictures or answer questions. Have some die sets for sale also if your looking. All prices are plus shipping. Payment by cash, check, USPS MO, or PayPal friends and family.

1. Hornady 00-7 press. Excellent condition. $80 + shipping
https://uploads.tapatalk-cdn.com/20180114/5696f650a5dec19aeb26f60e0e9b5df8.jpg

2. RCBS rock chucker stamped A3. Large and small primer arms. Needs a good cleaning. $90 + shipping
https://uploads.tapatalk-cdn.com/20180114/46c53f1c1ddd78555e7ade3968815d4a.jpg

3. Bair 12 gauge press. Similar to the Pacific DL155. $50 + shipping
https://uploads.tapatalk-cdn.com/20180114/0b0042618c6fcaa7969a59cd79ed592c.jpg

4. Pacific DL155. Missing the wag guide (Hornady May have something that will work) and one foot broken (can probably drill a new hole). Or use for parts. $40 +shipping
https://uploads.tapatalk-cdn.com/20180114/b6b44a21872b8aa9b56de324a42ad9e9.jpg

5. Pacific DL360. She’s been around the block. Bought this for a restore project but I have no time for that now. The bubba job on the primer feed actually works. Second photo shows the problem area. $60 +shipping
https://uploads.tapatalk-cdn.com/20180114/2c4e3cbd62a6f2077048ed2d73ef9e47.jpghttps://uploads.tapatalk-cdn.com/20180114/937b9b8173f83ed73b764c982a987eb2.jpg

6. Lyman 450 lube sizer. Just needs a good cleaning and it’s ready to roll. $70+ shipping
https://uploads.tapatalk-cdn.com/20180114/cdee210e9bdcf61b90ae72d7c147c51c.jpg

7. Luger American Model 6A. Needs a pin to link ram to handle. This think is big, took pic to show size next to Rock Chucker. $40 +shipping
https://uploads.tapatalk-cdn.com/20180114/ec83c6602a20c1ff7ea62711a1e886cb.jpg

8. CH Swag-O-Matic parts press. Frame, ram and what’s shown in photo. $35 + shipping.
https://uploads.tapatalk-cdn.com/20180114/b741f29842439453488522af935a1211.jpg




Sent from my iPhone using Tapatalk

[rmark]

PM on the Hornady 007

[Pipefitter]

If rmark does not want the Hornady 007 I will take it.

[Skunk1]

PM on the Hornady 007

This is Spf


Sent from my iPhone using Tapatalk

[TNsailorman]

sending pm on #4.

[Skunk1]

#4 is a 12 ga press.


Sent from my iPhone using Tapatalk

[Skunk1]

Another look

[Skunk1]

Hornady is sold


Sent from my iPhone using Tapatalk

[pull the trigger]

What do 7 & 8 use for shell holders?

[rking22]

What gage is # 5 Pacific? Hoping it's a 16 :)

[Skunk1]

What do 7 & 8 use for shell holders?

8 is a bullet Swaging press. 7 has an adapter for using standard type shell holders.


Sent from my iPhone using Tapatalk

[Skunk1]

What gage is # 5 Pacific? Hoping it's a 16 :)

12 gauge


Sent from my iPhone using Tapatalk

[Traffer]

Can't see in the picture of Swag-O-Matic... What is the long rod through the top? Also what (if any) things are there that screw into either the ram or top?
Thanks

[Skunk1]

It is a zip tie, here’s another picture.https://uploads.tapatalk-cdn.com/20180120/362a55132cbc1ddc71f45a1ab437e6e3.jpghttps://uploads.tapatalk-cdn.com/20180120/6d9fb292708f9d01de5cafbe66d3f787.jpg


Sent from my iPhone using Tapatalk

[Artful]

This might help those of you interesting in the Swage-0-Matic which was designed around the older 1/2 or 3/4 jacket pistol bullets
http://www.castpics.net/subsite/Manuals/Swage-O-Matic.pdf

I use mine mainly for reshaping lubed bullet points - it's quicker than my drilling set up

[Skunk1]

This might help those of you interesting in the Swage-0-Matic which was designed around the older 1/2 or 3/4 jacket pistol bullets
http://www.castpics.net/subsite/Manuals/Swage-O-Matic.pdf

I use mine mainly for reshaping lubed bullet points - it's quicker than my drilling set up

Thank you


Sent from my iPhone using Tapatalk

[Pressman]

Those pesky link pins that keep falling out are easily made from a correct diameter bolt shank.
Ken

[rbuck351]

I have been trying to keep myself from buying the Swag-O-Matic. One thing that has been holding me back is the lack of the die hold down nut.

[Skunk1]

Bair is SPF.


Sent from my iPhone using Tapatalk

[firebyprolong]

As per our pm agreement I will take #8 the ch swag-o-Matic . Thanks again.

[Skunk1]

Swag sold, Bair still available


Sent from my iPhone using Tapatalk

[Skunk1]

Closed