Snake Cult (Fun with Runoff)

[Bigslug]

211334

All the young cobras were naturally drawn by the hypnotic power of the HG68. . .:bigsmyl2:

[OS OK]

You better smackem with your ladle before they get into the house.

[Minerat]

[smilie=s:

[Jayhawkhuntclub]

Bigslug: It's possible that you may have too much time on your hands.[smilie=l:

[Jack Stanley]

Bigslug: It's possible that you may have too much time on your hands.[smilie=l:

That's what it looks like to me .

Jack

[LAH]

:bigsmyl2:

[PaulG67]

That's awesome, best I have ever seen. :razz:

[Texas by God]

211334

All the young cobras were naturally drawn by the hypnotic power of the HG68. . .:bigsmyl2:
They want to become HG68's! You must help them.

[762 shooter]

Now that is funny.
762

[nockhunter]

It must be really, really cold where you are. I think a touch of cabin fever has set in.




Mike

[Bigslug]

Hee! The little guys are a by-product of the big aluminum block I started using as a mold guide when I landed a 10-cavity HG50 - AIN'T NO WAY you can get by with the sissy little Pro Melt wire guide for that monster. With the 4-hole molds on Buffalo Arms vise-grip handles I usually use, accidental overflow off the sides makes these lead cobras as often as not.

[wistlepig1]

Ok, you made me smile and that's snakie good bullits

[mrrch]

Might shave some lead when you load those ;)

[swheeler]

Those will make the ultimate bullet for your Colt King Cobra!

[OS OK]

Hee! The little guys are a by-product of the big aluminum block I started using as a mold guide when I landed a 10-cavity HG50 - AIN'T NO WAY you can get by with the sissy little Pro Melt wire guide for that monster. With the 4-hole molds on Buffalo Arms vise-grip handles I usually use, accidental overflow off the sides makes these lead cobras as often as not.

Geeez...I can't imagine the weight on your 10 cavity, that's a lot-O-steel there...I just acquired a 6 cavity H&G 50 and it's the heaviest mould I ever used! Had to make a long slide type mould rest to handle it under the spigot.