Danish 11.7x51r

[Tyguy95]

What bullets are you guys using? What loads do these guns like?

Sent from my SM-G930VL using Tapatalk

[Reverend Al]

If you look for my post on my recently acquired Danish Roller I had great success with the LEE 405 hollow base bullet powder coated up to about .463" and loaded over a modest Trapdoor load of IMR4198. It put 3 shots into about 2" at 100 yards out of my roller. I'm using .45-70 cases which do swell up at the base on first firing, but I'll neck size from now on.

[Tyguy95]

If you look for my post on my recently acquired Danish Roller I had great success with the LEE 405 hollow base bullet powder coated up to about .463" and loaded over a modest Trapdoor load of IMR4198. It put 3 shots into about 2" at 100 yards out of my roller. I'm using .45-70 cases which do swell up at the base on first firing, but I'll neck size from now on.How do factory 45-70 trap door loads handle? Or am I just better off buying new brass.


Sent from my SM-G930VL using Tapatalk

[Tyguy95]

Well the ole girl came in the mail today and she is pretty finehttps://uploads.tapatalk-cdn.com/20180103/875654417a116dbe1c2a403dedb71315.jpg

Sent from my SM-G930VL using Tapatalk