For Sale - 2 H&G Moulds and 1 set of handles

[1_Ogre]

For Sale: 2 H&G Moulds:
1st is a 45ACP Mould. Markings are 938.452, s/n 3738-1.
2nd is a 9mm Mould, Markings are 264BB, s/n 4274.
Both moulds are 4 cavity and stamped:"Hensley & Gibbs, Murphy, Oregon". "1" set of handles.
Both moulds are in very very good condition as are the handles.
I can't upload pictures here so if your interested, PM me with your email or phone number and I can email/text pictures to you.
Asking $250 for both moulds and the handles, shipped to your door. USPS money order is the method of payment.

[mikeatl]

The H&G site describes the 264 as 125g, bevel base , round grease grove , semi wadcutter , small metplate . If this is not right please delete . Mike

[1_Ogre]

Delete what?

[1_Ogre]

Bump for Christmas Eve

[CaptREDD]

Bump to the topp!

[CaptREDD]

Which handles are the molds on??? the 45's??

[1_Ogre]

Handles will fit either mould, and yes the pins are in both moulds for the handles

[1_Ogre]

Bump one last time

[ncbearman]

The H&G site describes the 264 as 125g, bevel base , round grease grove , semi wadcutter , small metplate . If this is not right please delete . Mike


What does this mean? And what is a metplate? :popcorn:

[mikeatl]

The metplate is the flat part on the business end of the boolit. It weighs 125 grains, It is angled around the edge of the base , The lube grooves are rounded in the bottom not cut square like a Keith boolit , and I guess the way to describe a semi wadcutter is the front is angled with a flat nose ? Not trying to be smart , just unsure what the question was besides the metplate. If the description did not match his mould then delete my post. Mike

[1_Ogre]

All I know is the markings on the side of the mould and it is a bevel base, the information stamped on the side of the mould are: 9mm Mould, the Model Markings are 264BB, s/n 4274

[FISH4BUGS]

For Sale: 2 H&G Moulds:
1st is a 45ACP Mould. Markings are 938.452, s/n 3738-1.
2nd is a 9mm Mould, Markings are 264BB, s/n 4274.
Both moulds are 4 cavity and stamped:"Hensley & Gibbs, Murphy, Oregon". "1" set of handles.
From my research, the 45ACP mould is a H&G 938, the 9mm mould is a H&G 275.
Both moulds are in very very good condition as are the handles.
I can't upload pictures here so if your interested, PM me with your email or phone number and I can email/text pictures to you.
Asking $250 for both moulds and the handles, shipped to your door. USPS money order is the method of payment.

I am confused. You say the mould is marked #264bb but you say it is a #275. Can you explain?

[1_Ogre]

the markings are just what's marked on the side. I did as much research as I could, most likely got my numbers mixed up. The original post is exactly what's on the moulds, ferget what I said about my research, I'm removing that now

[1_Ogre]

SPF to MGD

[ncbearman]

The metplate is the flat part on the business end of the boolit. It weighs 125 grains, It is angled around the edge of the base , The lube grooves are rounded in the bottom not cut square like a Keith boolit , and I guess the way to describe a semi wadcutter is the front is angled with a flat nose ? Not trying to be smart , just unsure what the question was besides the metplate. If the description did not match his mould then delete my post. Mike

The word your looking for is meplat and his description was accurate.

[Lloyd Smale]

fair price for what are probably the finest molds made.