PDA

View Full Version : Looking for some .434" bullets



TCoggins
12-03-2017, 04:01 PM
I found some boolits. Thank you.

I have a couple H&R Handi rifles in 44 mag (one has been reamed to 445 Supermag). My cast boolits sized to .430 aren't very accurate, as the barrel has a .432" groove diameter. I'm looking for some .434" gas check style boolits that are as cast (no lube, no sizing, no gas check). I would like to try them before investing in a new mold. I will be powder coating these.

Looking for about 100 boolits.

I can buy boolits, or I have a lot of 63/37 solder that I could trade, whatever works best.

Let me know what you have.

Thanks.

Tim

bobthenailer
12-13-2017, 02:31 PM
I have the Saeco #420 200 gr TC sized & lubed @.433

I beagled the mould with aluminum tape so it would cast a larger boolet for a S&W 44 mag that had .433 chamber throats and did not shoot my normaly .430 sized boolets well, I first had lubed the unsized boolets to see if accuracy improved and it did and later bought a .433 sizer die.