Christmas Gift Exchange Thingy-Ma-Bob 2017

[jonp]

I think that with Thanksgiving in the rear view mirror it's time for the annual Gift Exchange. As in the past years I'll borrow
Love Life's original posting

With Christmas trees already on the shelves I reckoned I would get a gift exchange going. Here are the rules:

1) No broken or damaged stuff is to be offered
2) Offeree is to pay shipping to the person who wants the gift
3) Person who takes a gift must put up a gift for someone else to choose
4) No need to have a "Need" to get a gift
5) Gifts must be posted publicly on this thread and "I'll take it" for whatever gift must be posted on this thread so everybody can keep track

Goals of this exchange are to:
A) Get rid of stuff in your garage!
B) Aid a fellow caster/reloader/shooter
C) Have fun and spread some cheer!

Remember: post the I'll take it, put something else up and PM the giver with your info. No PM, no gift!

I'll start it off:

I will put up 50 45LC Brass as the first gift to whomever want's it and has something to exchange.

[Smoke4320]

JonP

lets get this party started ..

I will take your 50 45 LC cases and raise you 30 Winchester once fired 30-06

Also PM on the way
Thanks

[jonp]

It's all yours, Smoke4320 and don't forget to say Merry Christmas :p

come on, folks. 83 views and one offer? It doesn't have to be much, anything will do in the spirit of Christmas.

[JonB_in_Glencoe]

Merry Christmas !

I will offer a set of factory wood grips that were taken off a Ruger Redhawk (these will NOT fit a Super Redhawk).
The wood looks like Rosewood...or rose colored wood? :veryconfu

[azrednek]

Merry Christmas !

I will offer a set of factory wood grips that were taken off a Ruger Redhawk (these will NOT fit a Super Redhawk).
The wood looks like Rosewood...or rose colored wood? :veryconfu

I'll take the Redhawk grips. PM on the way. I'll get my Christmas gift posted in an hour or so. Have to get into my storage room and make sure it's still there.

[azrednek]

GIFT IS THE STOCK ONLY, MAUSER ACTION IN PHOTO NOT INCLUDED

Have an unfinished walnut Mauser sporter stock. Its one of the stocks in photos, not sure which. Numrich claimed the stock is 90-95% inletted. If you have a Parker Hale (except those built with FN action) Wards, Foremost, Santa Barbra or many of the 1950 through late 70's commercial Mauser only minor fitting needed.

Gift is good to any established Cast Boolit member with a USPS zip code. If you're not in the USA, help with the overseas postage will be appreciated.

http://i2.photobucket.com/albums/y17/dnisbet/TracySmith080.jpg (http://s2.photobucket.com/user/dnisbet/media/TracySmith080.jpg.html)


http://i2.photobucket.com/albums/y17/dnisbet/Untitled.jpg (http://s2.photobucket.com/user/dnisbet/media/Untitled.jpg.html)

http://i2.photobucket.com/albums/y17/dnisbet/TracySmith077.jpg (http://s2.photobucket.com/user/dnisbet/media/TracySmith077.jpg.html)

http://i2.photobucket.com/albums/y17/dnisbet/TracySmith082.jpg (http://s2.photobucket.com/user/dnisbet/media/TracySmith082.jpg.html)

I'M NOT EXPECTING ANYTHING IN RETURN, I WOULD LIKE TO SEE IT GO TO SOMEBODY THAT CAN PUT IT TO USE.

[jonp]

I think it would be a good idea to keep the gifts within a comparable value.

For instance,

Don't accept $100 worth of something with the intention of giving $5 worth of something.

You all have a good idea of the value of an item.

comparable value isn't the point. taking something as a gift and giving something is. In the past few years it's worked out pretty good. People put up what they have and that's fine whether it's an old scope or 20pcs of brass, a set of unused dies, odd number of jwords left over from a project, doesn't matter. It's the gift that counts not the value

[Love Life]

comparable value isn't the point. taking something as a gift and giving something is. In the past few years it's worked out pretty good. People put up what they have and that's fine whether it's an old scope or 20pcs of brass, a set of unused dies, odd number of jwords left over from a project, doesn't matter. It's the gift that counts not the value

Fact.

[JonB_in_Glencoe]

I'll take the Redhawk grips. PM on the way. I'll get my Christmas gift posted in an hour or so. Have to get into my storage room and make sure it's still there.

I've been offline for the last 25 hours.
I got your PM and I will ship the grips out in the couple days.

[RogerDat]

I agree value doesn't need to be comparable, but it does need to have value, otherwise it just sits. Think about it in terms of will it bring joy to the person when it arrives, if it would make you happy to open the package and see the item then it is probably a good choice. An item you would purchase yourself and not mind paying the $7 shipping cost is another good guideline.

Now I need to do some thinking.... Hmmm.

[JonB_in_Glencoe]

Merry Christmas ! (number 2)

I will offer another set of wood grips. BUT, these are a different story.

These will fit a New Model Ruger Blackhawk.

They are hand made walnut,
Left side has a Ruger black eagle emblem inset (just like factory).
The Right side also has a Ruger black eagle emblem inset, as well as, a nickel sized oval inset made of turquoise (or turquoise-like?) carving (or molded, if fake turquoise), I didn't make these, so I can't vouch for what the green stuff actually is...looks like turquoise...on second thought maybe it's Jade? but whatever it is? It has the image of the "Heads" side of a Buffalo nickel.

These are thinner than factory grips that I've had on other RBH guns, which is nice for small hands or if you just prefer a thin grip. These handmade grips are nicely done, at first glance they look like factory grips with a turquoise inset added, but when you look closely, even a novice gun collector can see these were hand made.

Now the down-side, the color tone of the wood on the right side is considerably darker than the left side, like the wood came from different trees?

Anyway, I think these will make a unique and treasured Christmas gift.

[RogerDat]

Merry Christmas ! (number 2)

I will offer another set of wood grips. BUT, these are a different story.

These will fit a New Model Ruger Blackhawk.

They are hand made walnut,
Left side has a Ruger black eagle emblem inset (just like factory).
The Right side also has a Ruger black eagle emblem inset, as well as, a nickel sized oval inset made of turquoise (or turquoise-like?) carving (or molded, if fake turquoise), I didn't make these, so I can't vouch for what the green stuff actually is...looks like turquoise...on second thought maybe it's Jade? but whatever it is? It has the image of the "Heads" side of a Buffalo nickel.

These are thinner than factory grips that I've had on other RBH guns, which is nice for small hands or if you just prefer a thin grip. These handmade grips are nicely done, at first glance they look like factory grips with a turquoise inset added, but when you look closely, even a novice gun collector can see these were hand made.

Now the down-side, the color tone of the wood on the right side is considerably darker than the left side, like the wood came from different trees?

Anyway, I think these will make a unique and treasured Christmas gift.

I would love these IF they will fit the old style Vaquero in 45 colt. I have a feeling the new Black Hawk might be a match to the new Vaquero rather than the old style but am not sure. Someplace I read the BH was the old Vaquero with adjustable sights but don't know if that was new model BH or old.

[JonB_in_Glencoe]

I would love these IF they will fit the old style Vaquero in 45 colt. I have a feeling the new Black Hawk might be a match to the new Vaquero rather than the old style but am not sure. Someplace I read the BH was the old Vaquero with adjustable sights but don't know if that was new model BH or old.

I've never owned a old style Vaquero (nor have I played with one owned by someone else)...So I have no idea if they will fit? These were take off's from a NM BH (45 colt).

Before my 2015 auction, I owned 3 Ruger NM BH guns in different calibers, these grips fit all those guns (obviously), that is all I know.

I did a search and found this on Ruger's website...they list serial number ranges, I can only assume that is the difference between Old and New Vaquero???
http://shopruger.com/Single-Action-Rosewood-Dymondwood-Grips/productinfo/19880/
But, since the grips I'm offering are handmade, I can't speak 100% to the interchangeability, but since Ruger factory grips are interchangeable, the "outline" of the wood should match, the only other thing would be, it there is some internal fitting? While they are flat, I don't know if there is a pin for alignment on the Vaquero or some other thingy?

Altamont's website mentions the XR3-RED frame...but there still could be the same issues that I mentioned with homemade grips.
https://www.altamontco.com/pistol-grips/ruger/blackhawk/

Let me know if you want them.

But you should know, if you accept them, you will have to agree with all my ideas in regards to Taxation :holysheep
LOL...I am just kidding, I couldn't resist...LOL
[smilie=l:[smilie=l:[smilie=l:

[RogerDat]

I'll check the serial number. It is an older one. Big innovation was it no longer fired if dropped unlike the originals. Has a hammer that needs to be cocked to bring up shim that allows it to hit firing pin.

Aren't your views on taxation that you personally feel you should be doing more to fund the government? And aren't you in a group who all send an extra 10% just to "help out" with paying down the USA credit card? That was you right? :kidding:

[RogerDat]

Well it looks like those pretty grips from JonB have a new home. Will put together a casters "care package" when I get home. Some goodies of the silver stream variety.

[JonB_in_Glencoe]

ref: post #12

Merry Christmas ! (number 2)

I will offer another set of wood grips. BUT, these are a different story.
These will fit a New Model Ruger Blackhawk.

...SNIP



Well it looks like those pretty grips from JonB have a new home. Will put together a casters "care package" when I get home. Some goodies of the silver stream variety.

I got your PM and I will ship the grips out in the couple days.

[Grmps]

I agree value doesn't need to be comparable, but it does need to have value, otherwise it just sits. Think about it in terms of will it bring joy to the person when it arrives, if it would make you happy to open the package and see the item then it is probably a good choice. An item you would purchase yourself and not mind paying the $7 shipping cost is another good guideline.

Now I need to do some thinking.... Hmmm.

Items under 12 OZ (I believe) can be shipped for less than $4
Large paded envelopes (free online) let you send more volume for the $

[koehn,jim]

I will take the Mauser stock, I am going thru stuff to put something up. I have a 3 die set of Lachmiler dies in .380 I will be happy to send someone. As far as memory serves me they are un-used.

[1911sw45]

Koehn, jim,

I wil take the .380 dies.

Thank you,

Adam

Pm sent

[1911sw45]

For the .380 dies from koehn,jim.

I offer up 100 new Remington.223rem brass. These are factory new.

[RogerDat]

I find that 8# of mono/foundry type letters will fit in a SFRB. This should be at least 9/19 Sn/Sb I can also fit a small pewter ingot (approx .25 lb)

According to the alloy calculator if you added this alloy SFRB to 35 lbs. of your COWW's it would yield at least hardball /2/6/92 with BHN around 15 and the 2% Sn makes it easy to cast with.

[Omega]

I find that 8# of mono/foundry type letters will fit in a SFRB. This should be at least 9/19 Sn/Sb I can also fit a small pewter ingot (approx .25 lb)

According to the alloy calculator if you added this alloy SFRB to 35 lbs. of your COWW's it would yield at least hardball /2/6/92 with BHN around 15 and the 2% Sn makes it easy to cast with.
Ok, I'm in, I'll take this and offer up a Gerber multitool, Merry Christmas.

[RogerDat]

Ok, I'm in, I'll take this and offer up a Gerber multitool, Merry Christmas. Got your PM with address and will try to get that in mail before weekend.

[Minerat]

Merry Christmas!!.

For your consideration. These are a set so whom ever get them gets them all. Pictures are to show the boolits and the numbers of each is listed in the description. Alloy for all is the Captains COWW.

Boolits on right are Mehi 413-640, Dressed with Smoke's Carolina Blue and Blammers Gator Gas checks. There are 15 in the packet - Pentagon HP average 210gr Sized to 0.410

The middle are Mehi 413-640, Dressed with Smoke's Carolina Blue and Blammers Gator Gas checks. There are 15 in the packet - Small HP average 218 gr Sized to 0.410

On the Left are Mehi 413-265 (Trueshot Clone), Dressed with Smoke's Carolina Blue and Blammers Gator Gas checks. There are 25 in the packet - Small HP average 261 gr Sized to 0.410.

This is a sample pack for any one that wants to try these boolits for a .41 Rem. mag or 41 Special, thought the 265's may be a little much for a special. The 265's are not too long for my 4.5" BH cylinder using the front crimp grove. BTW the 310 is not part of the package.:p

208807208808

[JimB..]

Merry Christmas!!.

For your consideration. These are a set so whom ever get them gets them all. Pictures are to show the boolits and the numbers of each is listed in the description. Alloy for all is the Captains COWW.

Boolits on right are Mehi 413-640, Dressed with Smoke's Carolina Blue and Blammers Gator Gas checks. There are 15 in the packet - Pentagon HP average 210gr Sized to 0.410

The middle are Mehi 413-640, Dressed with Smoke's Carolina Blue and Blammers Gator Gas checks. There are 15 in the packet - Small HP average 218 gr Sized to 0.410

On the Left are Mehi 413-265 (Trueshot Clone), Dressed with Smoke's Carolina Blue and Blammers Gator Gas checks. There are 25 in the packet - Small HP average 261 gr Sized to 0.410.

This is a sample pack for any one that wants to try these boolits for a .41 Rem. mag or 41 Special, thought the 265's may be a little much for a special. The 265's are not too long for my 4.5" BH cylinder using the front crimp grove. BTW the 310 is not part of the package.:p

208807208808

Merry Christmas Minerat! Been looking to try some options in the 41mag, would love to accept these.

Would joyously offer to give a gift of a SFRB of Montana Gold .380 90g JHP if someone would like it.

[Minerat]

JimB,

Merry Christmas, they are yours. I'll get them out tomorrow and send you tracking #.

[ascast]

30 Herret I have 20 cases I got somewhere. Have no use. They are made on R-P 30-30 cases. I have no idea how many times they been reload and shoot, but they look OK to shoot a few more times.
sorry no pic If you want them, you know the drill.

[azrednek]

I've been offline for the last 25 hours.
I got your PM and I will ship the grips out in the couple days.

Got the grips, much thanks not only for the grips but for getting me in the Christmas sprit. Merry Christmas!!

208848
AIN'T SHE PERRRTY!!!

[Beagle333]

Would joyously offer to give a gift of a SFRB of Montana Gold .380 90g JHP if someone would like it.

I just got my first .380 and a set of dies and would love to have these, Jim.[smilie=s:
PM sent.:coffeecom


I would like to offer up a gift of not one, but two 358432 SC molds, HP'd by our own Rangefinder. One has two different tip pins and is adjustable for HP depth. These have served me well and make a wonderful little HP wadcutter bullet. Cavities are perfect and screws are like new.
http://i613.photobucket.com/albums/tt214/shutupandjump/cast%20boolits/D64ABCB3-6244-46B4-B008-D9A77A2D08C0_zpsjofv3nrb.jpg


The results look like this:
http://i613.photobucket.com/albums/tt214/shutupandjump/cast%20boolits/T-buster1_zpsdc737336.jpg


And mostly of all!!!
M E R R Y. . . . . . C H R I S T M A S ! ! ! !
.
.
.
.
.

[jonp]

A reminder to everyone: If you accept a gift put up another in the same post then make sure to say Merry Christmas, it's the point to this exercise!

[zymguy]

ive been looking for a wad cutter mold, so ill Merry christmass Beagle 333's offer !!!!!

ill offer up both a 13.60 usps money order filled out for D crocket molds and casting pots in the vendor section , also i have a new unopend leupold scope mount in mate finish for a win model 70.
Merry christmass

[Beagle333]

With Christmas trees already on the shelves I reckoned I would get a gift exchange going. Here are the rules:

1) No broken or damaged stuff is to be offered
2) Offeree is to pay shipping to the person who wants the gift
3) Person who takes a gift must put up a gift for someone else to choose
4) No need to have a "Need" to get a gift
5) Gifts must be posted publicly on this thread and "I'll take it" for whatever gift must be posted on this thread so everybody can keep track

Goals of this exchange are to:
A) Get rid of stuff in your garage!
B) Aid a fellow caster/reloader/shooter
C) Have fun and spread some cheer!

Remember: post the I'll take it, put something else up and PM the giver with your info. No PM, no gift!

I didn't get a PM, Ben. 'You still want this?


Edit: Got it now. All good. Christmas is in the mail!!!!! [smilie=s:

[jonp]

Folks, if you want to participate follow the rules and they are very simple. Say "I'll take this, put up another item in it's place then say Merry Christmas" followed by a pm to the giver with your information. No-one is obligated to go chasing someone around. If you have time to post "I'd like that" you have time to follow it with a pm. No PM, No Gift.

This is supposed to be fun and a gift giving thread in the spirit of Christmas for the members on this forum.

Merry Christmas to all

[Omega]

Got your PM with address and will try to get that in mail before weekend.I got the package, this will probably end up coming out of my RB .44, thanks again.

The Gerber multitool is still up for grabs BTW.

[Jamezius Maximus]

I got the package, this will probably end up coming out of my RB .44, thanks again.

The Gerber multitool is still up for grabs BTW.

I could use a multi tool. lost mine a while back. I'll take it lol!

I can meet your call with a brand new Lee powder charging kit (came with my loadmaster) never used it's the one with the chain and disks. All parts should be there. If You don't need something like that or know someone who does, I'd be happy to ship it to them. Merrrrryyy Christmas [emoji319]


Sent from my iPhone using Tapatalk

[RogerDat]

Ruger Grips look pretty, daughter was admiring them when she came over. Wife even thought they were nice. She thinks I am way to utilitarian, so this is a rare "win" for me on style points.

Been sick so haven't mounted them. BTW - Merry Christmas and a Happy New Year.

[guywitha3006]

Merry Christmas everyone! I have a set of pink hogue grips for a Ruger Sp101. I may have mounted them but I think I opened the package to look at it. If you can use, let me know and I'll put them in a FR box and send them to you.https://uploads.tapatalk-cdn.com/20171207/f9ffd1c82c040ade65bf42160fbe424e.jpg

Sent from my LGUS991 using Tapatalk

[JimB..]

JimB,

Merry Christmas, they are yours. I'll get them out tomorrow and send you tracking #.

Minerat, you make some beautiful bullets! And thanks for the surprise, I had none and will surely put them to good use.

Merry Christmas to all!

[Minerat]

Minerat, you make some beautiful bullets! And thanks for the surprise, I had none and will surely put them to good use.

Merry Christmas to all!

I'm glad you like them. I got the surprises right after they came out and figured you'd appreciate them.

Merry Christmas

[Beagle333]

JimB, gift received and much appreciated!!!! This will keep me and the wife in top form for our little self defense gun shooting. We extend the warmest Christmas wishes to all and extreme thanks to Jim again.
Merry Christmas!!!!!

Chuck.

[jonp]

With some help from Grmps I think this is a close list of what is still sitting there waiting for a new home

30 Winchester once fired 30-06

I offer up 100 new Remington.223rem brass. These are factory new.

30 Herret I have 20 cases I got somewhere. Have no use. They are made on R-P 30-30 cases.

ill offer up both a 13.60 usps money order filled out for D crocket molds and casting pots in the vendor section , also i have a new unopend leupold scope mount in mate finish for a win model 70.

I can meet your call with a brand new Lee powder charging kit (came with my loadmaster) never used it's the one with the chain and disks

I have a set of pink hogue grips for a Ruger Sp101. I may have mounted them but I think I opened the package to look at it.

[rl69]

Bump!

[Grmps]

Ho-Ho-Ho

[Grmps]

I can use the Lee powder charging kit (came with my loadmaster) never used it's the one with the chain and disks

and will gift a new Lee 90581 Powder Through Expander Die 38 Special, 357 Magnum and an SFRB of 38 spcl brass

Merry Christmas All

[Jamezius Maximus]

I can use the Lee powder charging kit (came with my loadmaster) never used it's the one with the chain and disks

and will gift a new Lee 90581 Powder Through Expander Die 38 Special, 357 Magnum and an SFRB of 38 spcl brass

Merry Christmas All

10-4 good buddy it's yours, pm me your address. Also I have a new chain from lee coming in (next Tuesday) when that arrives I will ship [emoji106] everything else should be there.


Sent from my iPhone using Tapatalk

[Handloader109]

Grmps, I will take the die and the box of 38spl brass, got my wife a revolver for Christmas and want to load up some light rounds for her....

And I'll gift:
And I've a 20 ounce stainless steel cup I powder coated in a black grip powder. You can have it plain, or I can engrave cast booklist logo without the girl and if you want a name. The girl doesn't reverse engrave pretty.


Merry Christmas ya'll!

[Minerat]

And I'll gift:
And I've a 20 ounce stainless steel cup I powder coated in a black grip powder. You can have it plain, or I can engrave cast booklist logo without the girl and if you want a name. The girl doesn't reverse engrave pretty.


Merry Christmas ya'll!

Handloader109

MERRY CHRISTMAS!

I'll take the 20oz cup with logo and Minerat on it.

This is for the Boolits listed in post 24.

Thank you.

[Handloader109]

Your welcome Minerat! Merry Christmas all!

[Grmps]

Handloader109, the die and the box of 38spl brass are yours. will PM when shipped

Merry Christmas

[Jamezius Maximus]

Omega, got the multi tool. Many Thanks and Merry Christmas [emoji106][emoji319]
https://uploads.tapatalk-cdn.com/20171214/fa51770dd4fbedda8240ae01c3a99183.jpg


Sent from my iPhone using Tapatalk

[Omega]

Cool, hope it serves you well, Merry Christmas.

[jrdztech]

Handloader109, the die and the box of 38spl brass are yours. will PM when shipped

Merry Christmas

I think this is a close list of what is still sitting there waiting for a new home

30 Winchester once fired 30-06

I offer up 100 new Remington.223rem brass. These are factory new.

30 Herret I have 20 cases I got somewhere. Have no use. They are made on R-P 30-30 cases.

ill offer up both a 13.60 usps money order filled out for D crocket molds and casting pots in the vendor section , also i have a new unopend leupold scope mount in mate finish for a win model 70.

I have a set of pink hogue grips for a Ruger Sp101. I may have mounted them but I think I opened the package to look at it.Merry Christmas to you all!!!
I gladly take the 100 pcs of Remington 223 brass...
I offer a small box full of your choice:
.380 acp, 9mm lugger, .40 s&w, or .45 acp once fired brass, mixed headstamps..

Sent from my SAMSUNG-SM-N910A using Tapatalk

[1911sw45]

Jrdztech send me a pm and its yours.

Merry Christmas!!!

[jrdztech]

Jrdztech send me a pm and its yours.

Merry Christmas!!!Thank you Sir.

Sent from my SAMSUNG-SM-N910A using Tapatalk

[bdicki]

Merry Christmas everyone, I'll offer up a Ruger Mark II magazine.
And I'll take the 30 Winchester once fired 30-06 if still available.

[Smoke4320]

Bdicki
You got my 30-06 Brass .. I would love to have the Ruger MK 2 mag for my gun
PM to follow
and I will offer up 100 rds of either 9MM or 45 ACP Brass peoples choice

[Grmps]

Merry Christmas

I think this is a close list of gifts still sitting there waiting for a new home


ascast 30 Herret I have 20 cases I got somewhere. Have no use. They are made on R-P 30-30 cases.

zymguy ill offer up both a 13.60 usps money order filled out for D crocket molds and casting pots in the vendor section , also i have a new unopend leupold scope mount in mate finish for a win model 70.

guywitha3006 I have a set of pink hogue grips for a Ruger Sp101. I may have mounted them but I think I opened the package to look at it.

jrdztech I offer a small box full of your choice: .380 acp, 9mm lugger, .40 s&w, or .45 acp once fired brass, mixed headstamps.

Smoke4320 I will offer up 100 rds of either 9MM or 45 ACP Brass peoples choice

[bdicki]

Smoke the mag is yours.
Merry Christmas

[Grmps]

Handloader109, the die and the box of 38spl brass are yours. and have shipped ETA Monday
PS I put it in a padded envelope to make room for an extra gift for you :).

Merry Christmas

[sparky45]

I'd offer up a set of RCBS TRIM PRO Shell Holders#03; #10; #12; and #16 for anyone in need.
First to PM will receive the gift.

[jonp]

I have a set of RCBS .348 Win dies looking for a new home. Bought used, cleaned by me then put on a shelf and never used.

Merry Christmas

[Grmps]

Merry Christmas

I think this is a close list of gifts still sitting there waiting for a new home


ascast 30 Herret I have 20 cases I got somewhere. Have no use. They are made on R-P 30-30 cases.

zymguy ill offer up both a 13.60 usps money order filled out for D crocket molds and casting pots in the vendor section , also i have a new unopend leupold scope mount in mate finish for a win model 70.

guywitha3006 I have a set of pink hogue grips for a Ruger Sp101. I may have mounted them but I think I opened the package to look at it.

jrdztech I offer a small box full of your choice: .380 acp, 9mm lugger, .40 s&w, or .45 acp once fired brass, mixed headstamps.

Smoke4320 I will offer up 100 rds of either 9MM or 45 ACP Brass peoples choice

sparky45 a set of RCBS TRIM PRO Shell Holders#03; #10; #12; and #16 for anyone in need

jonp a set of RCBS .348 Win dies looking for a new home. Bought used, cleaned by me then put on a shelf and never used.

[Grmps]

Merry Christmas

[Handloader109]

OK Grmps, got the package, thanks for the die and the brass! I'm assuming the surprise in a double zip lock is clear powder coating powder...... The taste is pretty bland :bigsmyl2:

[Jamezius Maximus]

jrdztech and Smoke4320

I've already claimed the multi tool and sent someone a new lee powder charging kit...however if nobody claims either of your .45 brass I could sure use it. Recently got into competitive shooting...uspsa limited. Plant a lot more lead seed now [emoji106][emoji95]


Sent from my iPhone using Tapatalk

[Bazoo]

I'll take the 348 winchester dies, and in return, i'll offer 5 hollow sticks of LS's carnauba red. Merry Christmas Everyone.

[jrdztech]

jrdztech and Smoke4320

I've already claimed the multi tool and sent someone a new lee powder charging kit...however if nobody claims either of your .45 brass I could sure use it. Recently got into competitive shooting...uspsa limited. Plant a lot more lead seed now [emoji106][emoji95]


Sent from my iPhone using TapatalkHello, send me your info and I'll send you the .45 brass.

Sent from my SAMSUNG-SM-N910A using Tapatalk

[jonp]

I'll take the 348 winchester dies, and in return, i'll offer 5 hollow sticks of LS's carnauba red. Merry Christmas Everyone.

They are yours and Merry Christmas

[bdicki]

I have a Browning 20 ga Invector plus stainless steel skeet choke tube that I'll offer up. Be sure that you have an invector plus gun, it's 2-1/8 inches long.
I'll take the 5 sticks of carnauba red.
Merry Christmas

[Bazoo]

bdicki, I'll try to get it out tomorrow. Merry Christmas!

[jrdztech]

Jrdztech send me a pm and its yours.

Merry Christmas!!!Just got the brass today, thank you very much.. Merry Christmas Sir!!!

Sent from my SAMSUNG-SM-N910A using Tapatalk

[1911sw45]

Just got the brass today, thank you very much.. Merry Christmas Sir!!!

Sent from my SAMSUNG-SM-N910A using Tapatalk


Your welcome! Merry Christmas!!!

[Bazoo]

Got the dies today, thank you. Merry Christmas to everyone!

[Minerat]

Your welcome Minerat! Merry Christmas all!

John,

The Tumbler finally got here in great shape. It looks great and was worth the wait.
Happy New Year

-------------------------------------------------------------------------------------------------------

Bet everyone mine traveled the farthest to go a short distance (805 miles) in more time (12 days).

Left Springdale Ar on 12/14/17 arrived Medford OR 12/17/17 2034 miles in 3 days
12/17 Left Medford OR to Portland OR 243 miles 1 day
12/18 Left Portland to Clackamas OR 14 miles 1 day
12/18 Left Clakamas to 12/23/18 Denver 1268 miles 5 days
12/23 left Denver to Arvada 12/24/18 20 miles 1 day
Delivered today 12-26-17 total distance traveled to go 805 miles - 3,579 miles in 12 days all on Priority Mail 2 Day.

[Handloader109]

Wow, well Merry Christmas...... Got to hand it usps, that is longest time it's taken to get one of my packages delivered.

[1989toddm]

I forgot all about gift exchange this year! Looks like y'all had a grand time, Merry Christmas!


Sent from my iPhone using Tapatalk