RCBS 147 gr .356, 9mm and 38 Super

[Leadmelter]

There is a short Miha run in a 8 gang mold. Does anybody have any experience with this mold? I am afraid with my alloy the bullet may go over 150grs. It has a blunt nose and does not look other 147 9mm designs. I plan on using them in a Ruger American and S&W 39.
Leadmelter

[sigep1764]

My 9mm cast boolits all weigh over 150 grains and they are hollow points. Supposed to drop 147 but end up about 152. I wouldn't worry about weight, I would worry about expanding my brass deep enough to not swage the boolits down and seating deep enough to not hit the lands. Just some thoughts.