CLOSED - MP RCBS 38 150 SWC HP Clone Group Buy

[Wasalmonslayer]

Hello Guys

I just got informed by Miha that we can open a group buy for this design in a cramer HP.
The as cast weight in solid form is 154 ish depending on alloy.
HP options are as follows large round, small round, penta, cup point, solid.

There has been very little if nothing done with this bullet in the hollow point world until now.
Tell your friends and get the word out :)

This bullet it shoots great in any revolver I have tried it in and will even load in the Smith N frame which is notorious for being hard to get a bullet in.
I shoot it in my Smith model 28 all the time with brass trimmed to spec.
There is a nice write up done by Glen Fryxell about how this mold and the Lyman 358477 shoot neck and neck and is super accurate.
This mold has only ever been available in the 2 Cavity version non hollow point until now.

[SIZE=7]CLOSED[/SIZE

221816206578


Here are the options -

1) Solids will be available in or 6 cavity brass or 8 cavity aluminum with the lee style sprue cutter.
2) The Hollow point versions will be available in 2 or 4 cavity brass.
3) You have an option of .358 or .360 diameters
4) You also have an option of a smooth sided version for coating with P.C. or Hi Tek.

The costs will be as follows-

- 2 Cavity HP all pins included 95 Euro's (80,75 with discount)
- 4 Cavity HP all pins included 135 Euro's (114,75 with discount)

- 6 Cavity solid Brass 95 Euro's (80,75 with discount)
- 8 Cavity solid Aluminum 95 Euro's (80,75 with discount)

If you want handles they will ship with the mold for 20 euro which is a deal on a great pair of handles!

The above prices do include discount!

The conversion of Euro's to dollars will happen when Miha sends the invoice via PayPal.

GROUP BUY DISCOUNT OF 15% GIVEN AT INVOICE TIME

Please include your disguised email address and what mold design with options you would like.


HP Regular Lube groove Buy List
1) kahngr at potsdam dot edu - 2 Cavity HP .360 with handles
2) jem10 at bellsouth dot net - 2 Cavity HP .360
3) dearborn416 AT yahoo DOT com - 4 Cavity HP .360
4) cvcooks at astound dot net - 4 Cavity HP .360
5) darren dot hain at alyrin dot com - 4 Cavity HP .360
6) Awebb (at) teamwebb (dot) net - 4 Cavity HP .360
7) meadmkr at yahoo dot com - 4 Cavity HP .360
8) lacresta at hotmaildotcom - 4 Cavity HP .360 with handles
9) rockyert68 at yahoo dot com - 4 Cavity HP .360
10) ikarus1 at carolina dot rr period com - 4 Cavity HP .360
11) Wewestjr01 at frontier dot com - 4 Cavity HP .360
12) Lcel at hotmail dot com - 4 Cavity HP .360
13) greggoryashley at yahoo dot com - 4 Cavity HP .360
14)
15)
16)

HP Hi Tek design
1) respiegel (at) yahoo (dot) com - 4 Cavity HP .358
2) way2kajun AT YaHoO dot COM - 2 Cavity HP .358 with handles
3) Sorgatz at ameritech d0t net - 4 Cavity HP .360
4) huntnman(at)swbell(dot)com - 4 Cavity HP .358
5) jbpaul at suddenlink dot net - 4 Cavity HP .358
6) max at yvmarine dot com - 4 Cavity HP .358 ( Honcho)
7) LRN2DRV1 at yahoo dot com - 2 Cavity HP .358
8) xinghaichi at gmail.com - 4 Cavity HP .358
9)

Regular lube groove solid
1) kredig81 at gmail . com - 8 Cav Aluminum .358
2) darren dot hain at alyrin dot com - 6 Cavity Brass .360
3) mhkilgore at mac dot com - 8 Cavity Aluminum .358
4) mhkilgore at mac dot com - 8 Cavity Aluminum .360
5) vefa01-raps (at) freenet (dot) de - 6 Cavity Brass .358
6) kawacharles1973 at gmail dot com - 6 Cavity Brass .360 with a set of handles
7) ccsfd1@aol dot com - 6 Cavity Brass .358
8) dusandacho at yahoo dot com - 6 Cavity Brass .358
9) sckurzawa at hotmail dot com - 8 Cavity Aluminum .358
10) wrichins at gmail dot com - 6 Cavity Brass .358
11) Alfredhmitchell at gmail dot com - 6 Cavity Brass .358
12) reinhamre at bahnhof.se - 6 Cavity Brass .358
13) tf3g at amsat. org - 8 Cavity Aluminum .358 and a set of handles
14) bardisattva at gmail dot com - 8 Cavity Aluminum .358
15) Kingcoats357 at yahoo doht com - 8 Cavity Aluminum .358 and a set of handles
16)

Hi Tek solid
1) Kitikadavies at gmail dot com - 8 Cav Aluminum .360
2) keith(dot)kohlruss(at)gmail(dot)com - 6 Cav Brass .358 with handles
3) O r thoNP Beau @ yahoo.com - 6 Cavity Brass .360
4)
5)
6)

[georgerkahn]

I will be privileged to purchase:
One Two-cavity Hollow Point (normal, regular lub) Version in 0.360" diameter, brass, with all pins, top punch, Allen keys, and one set of Handles.
georgerkahn
kahngr at potsdam dot edu

[Wasalmonslayer]

I will be privileged to purchase:
One Two-cavity Hollow Point (normal, regular lub) Version in 0.360" diameter, brass, with all pins, top punch, Allen keys, and one set of Handles.
georgerkahn
kahngr at potsdam dot edu

Got you down my friend!

Thanks

[Low Budget Shooter]

Wasalmonslayer, thanks for working on these mold orders!

My two cents worth on HP pin dimensions:

1. for 38 Special: .160" .315" deep 7 degree taper
2. for .357 Magnum: .140" .315" deep 10 degree taper


Thanks again!

Jeff

[Wasalmonslayer]

Wasalmonslayer, thanks for working on these mold orders!

My two cents worth on HP pin dimensions:

1. for 38 Special: .160" .315" deep 7 degree taper
2. for .357 Magnum: .140" .315" deep 10 degree taper


Thanks again!

Jeff

That is right along the lines of what I was thinking too....

It is a lot of work herding the cats for these buys but the finished product is well worth it :)

Thanks for your input!

[Kitika]

Put me down for an 8 cavity hitek .358 please. Kitikadavies at gmail dot com. Will it still have the crimp groove?

[Wasalmonslayer]

Put me down for an 8 cavity hitek .358 please. Kitikadavies at gmail dot com. Will it still have the crimp groove?


Yes sir it will have the crimp groove

[Kitika]

Great put me down for one :)

[Wasalmonslayer]

Put me down for an 8 cavity hitek .358 please. Kitikadavies at gmail dot com. Will it still have the crimp groove?

Got you down.

Thanks!

[jem102]

I am in for one brass 2 Cavity HP with regular Lube grooves @ 360.
jem10 at bellsouth dot net

[Wasalmonslayer]

I am in for one brass 2 Cavity HP with regular Lube grooves @ 360.
jem10 at bellsouth dot net

Got you down.

Thanks!

[Wasalmonslayer]

Saturday bump

[Wasalmonslayer]

Bump for a personal favorite

[ryan]

4 cavity HP

dearborn416 AT yahoo DOT com

Thank you,
Ryan

[Wasalmonslayer]

4 cavity HP

dearborn416 AT yahoo DOT com

Thank you,
Ryan

Got you down. What size would you like it to cast to?? .358 or .360

Thanks

[Yellowseven]

Will the hp hitek have the crimp grove?

Sent from my SM-G925V using Tapatalk

[Wasalmonslayer]

Will the hp hitek have the crimp grove?

Sent from my SM-G925V using Tapatalk

Yes it will still have the crimp groove

[Yellowseven]

Non hp hitek solid 8 cavity .360

Yellowsevenpot at gmail . Com

Sent from my SM-G925V using Tapatalk

[Yellowseven]

Please disregard that last post.

Sign me up for a 4 cavity hp hitek mold at .360

My fingers were working faster than my brain.

Yellowsevenpot at gmail . Com

Sent from my SM-G925V using Tapatalk

[Wasalmonslayer]

Please disregard that last post.

Sign me up for a 4 cavity hp hitek mold at .360

My fingers were working faster than my brain.

Yellowsevenpot at gmail . Com

Sent from my SM-G925V using Tapatalk

No worries got you down

Thanks!

[reddog81]

8 cavity aluminum .358 with lube grooves. No HP
kredig81 at gmail . com

Any idea on how many sign ups are needed to get into production?

[Wasalmonslayer]

8 cavity aluminum .358 with lube grooves. No HP
kredig81 at gmail . com

Any idea on how many sign ups are needed to get into production?

Got you down.

Because it is a new design it will take at least 20 molds to get into last call so tell all your friends :bigsmyl2:

[ryan]

Got you down. What size would you like it to cast to?? .358 or .360

Thanks

Sorry for the delay in getting back to you, just noticed you're reply. I'd like it in .360 please.

Thank you,
Ryan

[Wasalmonslayer]

Sorry for the delay in getting back to you, just noticed you're reply. I'd like it in .360 please.

Thank you,
Ryan

Got you fixed up

Thanks!

[rdwarrior]

I would love the hp mold if it used gas checks. also what handles will fit these molds, or do they come with handles?

[Wasalmonslayer]

I can ask if Miha would offer it that way.
The drawing is just for plain base.

The MP mold handles that Miha makes or Lee six cavity handles.

[Wasalmonslayer]

Saturday Bump [smilie=s:

[358wcf]

please add me to the list for a "4cav brass .360"HP w/lube groove"
thanks 358wcf
cvcooks at astound dot net

[Wasalmonslayer]

please add me to the list for a "4cav brass .360"HP w/lube groove"
thanks 358wcf
cvcooks at astound dot net

Got you down.

Thanks!

[dhain]

Put me down for a 2-cavity hollow point regular lube grooves at .360 AND a 6-cavity solid with regular lube grooves at .360.

darren dot hain at alyrin dot com

[Wasalmonslayer]

Put me down for a 2-cavity hollow point regular lube grooves at .360 AND a 6-cavity solid with regular lube grooves at .360.

darren dot hain at alyrin dot com

Got you down.

Thanks!

[Wasalmonslayer]

Saturday Bump for a great design!!

Have a good day guys.

[Wasalmonslayer]

11 molds so far just need 9 more to go last call!

[Wasalmonslayer]

Bump for a great design!

[Wasalmonslayer]

Bumpski for a great 38/357 swc that shoot really well and has never been offered in a hollow point design or in more than a two cavity mold!

[Wasalmonslayer]

Tell all your friends!!

I see posts all the time about people wanting the RCBS 150 KT mold to be in a higher output design and now is the time it is available lets tell our friends and kick this baby in the shorts!!!! ;)

[Gunslinger1911]

Hi Wasal,

OK , you bumped it enough for me to give in : 4 cav, hollow point, regular lube grooves, .360

gnslgr1911 at yahoo dot com

[Nueces]

Please put me down for two with regular lube grooves:

One 8 cavity solid in 0.358, and

One 8 cavity solid in 0.360

mhkilgore at mac dot com

[meadmkr]

Please put me down for a 4 cav brass, hollow point (all pins), regular lube grooves, .360

meadmkr at yahoo dot com

[Wasalmonslayer]

Hi Wasal,

OK , you bumped it enough for me to give in : 4 cav, hollow point, regular lube grooves, .360

gnslgr1911 at yahoo dot com

Got you down

Thanks!

[Wasalmonslayer]

Please put me down for two with regular lube grooves:

One 8 cavity solid in 0.358, and

One 8 cavity solid in 0.360

mhkilgore at mac dot com

Got you down

Thanks!

[Wasalmonslayer]

Please put me down for a 4 cav brass, hollow point (all pins), regular lube grooves, .360

meadmkr at yahoo dot com

Got you on the list

Thanks!

[trmungle]

.360 with lube grooves, 4 cav.hp. all pins, with handles. Thank you, Tom
lacresta at hotmaildotcom

[Wasalmonslayer]

.360 with lube grooves, 4 cav.hp. all pins, with handles. Thank you, Tom
lacresta at hotmaildotcom

Got you down.

Thanks!

[georgerkahn]

By my count, are there sixteen orders thus far? If so, this seems like a worthy "just four more needed" Saturday bump.
geo

[Thor's Daddy]

One 4-cavity HP lube groove mold at .358 please

rodrick dot reidsma at gmail dot com

[Wasalmonslayer]

One 4-cavity HP lube groove mold at .358 please

rodrick dot reidsma at gmail dot com

Got you down

Thanks!

[Wasalmonslayer]

Just put up a new image with the hollow point drawn in.

Thanks Lakehouse2012 for your help!!

[schemelschelm]

1x 6 Cavity NON HP, regular lube grooves, solid Brass, Dia. .358
vefa01-raps (at) freenet (dot) de

Thanks!

[Wasalmonslayer]

1x 6 Cavity NON HP, regular lube grooves, solid Brass, Dia. .358
vefa01-raps (at) freenet (dot) de

Thanks!


Got you down

Thanks!

[Wasalmonslayer]

Thursday Bump for a great SWC

[ikarus1]

wow not sure how I missed this one. Put me down for the regular 4 cav HP one please

ikarus1 at carolina dot rr period com

[georgerkahn]

Not that I'm really anxious to receive one (wink wink wink) -- by my count there are nineteen on the order list? I'm hoping we will need but ONE more order for production of this mould to begin? (This more than worth the bump! --we are now sooooooo close)

[Wasalmonslayer]

Not that I'm really anxious to receive one (wink wink wink) -- by my count there are nineteen on the order list? I'm hoping we will need but ONE more order for production of this mould to begin? (This more than worth the bump! --we are now sooooooo close)

Got your handles added.

Sorry about that....

[Wasalmonslayer]

wow not sure how I missed this one. Put me down for the regular 4 cav HP one please

ikarus1 at carolina dot rr period com

Got you down. George is correct we are at 19 molds just one away from last call :)

Thanks!

[schemelschelm]

Got you down

Thanks!

Can you please change my order to: 1x 8 Cavity NON HP, regular lube grooves, solid Aluminum , Dia. .358.

Thanks

[Wasalmonslayer]

Can you please change my order to: 1x 8 Cavity NON HP, regular lube grooves, solid Aluminum , Dia. .358.

Thanks

Got you fixed up!

[Gunslinger1911]

OK, my order got us most of the way after a month stagnant. lol (I normally kill threads !)
Maybe a bump will get us one more !

[Wasalmonslayer]

OK, my order got us most of the way after a month stagnant. lol (I normally kill threads !)
Maybe a bump will get us one more !

Don’t jinx us we are so close just 1 mold from 20 :)

[Kawacharles]

Please 1x:

6 Cavity NON HP, regular lube grooves, solid Brass, Dia. .358

kawacharles1973 at gmail dot com

[Wasalmonslayer]

Please 1x:

6 Cavity NON HP, regular lube grooves, solid Brass, Dia. .358

kawacharles1973 at gmail dot com

Got you down

Thank you!

You gave us lucky #20 we are now in LAST CALL!

[MiHec]

Please see this link

http://castboolits.gunloads.com/showthread.php?355097-Shipping-costs!!!

[Loc n Load]

Please Put me down for a four cavity HP w/all pins. reg lube groove .360
Wewestjr01 at frontier dot com
Thanks.

[Wasalmonslayer]

Please Put me down for a four cavity HP w/all pins. reg lube groove .360
Wewestjr01 at frontier dot com
Thanks.

Got you down

Thanks!

[Wasalmonslayer]

Friday morning bump :)

[toallmy]

I would like a 6 cavity brass with lube grove at .358 / ccsfd1@aol.com , did I order correctly ?

[Wasalmonslayer]

I would like a 6 cavity brass with lube grove at .358 / ccsfd1@aol.com , did I order correctly ?


Got you on the list.

You did just fine. I disguised your email a little better for you.
Please verify it.

Thank You!

[toallmy]

Yep that's it , thanks toallmy

[Lakehouse2012]

I'm in WASALMANASLAYER...

Sorgatz at ameritech d0t net - 6 cav brass solid at .360 regular lube groove mold please.

Thanks,
LAKEHOUSE2012

Sent from my SM-G950U using Tapatalk

[Iron Whittler]

I'll take 1 mold, 4cav. brass hp, .360 dia., reg. lube groove. rockyert68 at yahoo dot com. :Fire:

[Shoot66]

dusandacho at yahoo dot com - brass 6C solid with lube groove at .358
thanks

[Wasalmonslayer]

dusandacho at yahoo dot com - brass 6C solid with lube groove at .358
thanks

Got you down

Thanks!

[Wasalmonslayer]

I'll take 1 mold, 4cav. brass hp, .360 dia., reg. lube groove. rockyert68 at yahoo dot com. :Fire:

Got you down

Thanks!

[Wasalmonslayer]

I'm in WASALMANASLAYER...

Sorgatz at ameritech d0t net - 6 cav brass solid at .360 regular lube groove mold please.

Thanks,
LAKEHOUSE2012

Sent from my SM-G950U using Tapatalk


Got you down!

Thanks lakehouse!

[anothernewb]

if it's still open, put me down for the alum 8 cavity solid, standard lube groove .358 dia.

also - does this come with the top punch like the 45 200 swc group buy does?

chaseaise at gmail dot com

[Wasalmonslayer]

if it's still open, put me down for the alum 8 cavity solid, standard lube groove .358 dia.

also - does this come with the top punch like the 45 200 swc group buy does?

chaseaise at gmail dot com

Group buy is still alive got you down
Yes they come with a Lyman style top punch.

Thanks!

[Wasalmonslayer]

Sunday bump

[Thor's Daddy]

Please change mine to 2 cav HP (currently I'm #9 on the list) rodrick dot reidsma at gmail dot com

thanks

[Wasalmonslayer]

Please change mine to 2 cav HP (currently I'm #9 on the list) rodrick dot reidsma at gmail dot com

thanks

Got you taken care of :)

[Kawacharles]

Please 1x:

6 Cavity NON HP, regular lube grooves, solid Brass, Dia. .358

kawacharles1973 at gmail dot com

@Wasalmonslayer:

Can you, please, chance my order to .360? With handles, please! Sorry and thanks!

[Wasalmonslayer]

@Wasalmonslayer:

Can you, please, chance my order to .360? With handles, please! Sorry and thanks!

Got you fixed up!

[Gunslinger1911]

Hi Wasal, I found a 4 cav Lyman that looks like Erik HP'd in the distant past. - $50 !!!!!!!!!!!!
I'm gonna dropout of this buy please.

[Wasalmonslayer]

Hi Wasal, I found a 4 cav Lyman that looks like Erik HP'd in the distant past. - $50 !!!!!!!!!!!!
I'm gonna dropout of this buy please.

No worries

Got you removed.

[Reinhamre]

I am in for a 6 cav. brass .358 plus handle, reinhamre@bahnhof.se

[Wasalmonslayer]

I am in for a 6 cav. brass .358 plus handle, reinhamre@bahnhof.se

Got you fixed up.

I disguised your email for you so that you don't get spammed.

Thanks

[Plan_IX]

If available I'll jump in on this one. Awebb (at) teamwebb (dot) net 4 cavity brass all pins. .360

[Yellowseven]

Please remove me from this buy. Thank you.

Sent from my Pixel 2 using Tapatalk

[Lakehouse2012]

Got you down!

Thanks lakehouse!

Wasalmonslayer- I see on the 1st page list, you have me as a .358. Will you modify that to a 360 please. :)

#9 of the "NON HP regular lube groove solid"

[Wasalmonslayer]

Wasalmonslayer- I see on the 1st page list, you have me as a .358. Will you modify that to a 360 please. :)

#9 of the "NON HP regular lube groove solid"

Sure thing!!

[Lakehouse2012]

If available I'll jump in on this one. Awebb (at) teamwebb (dot) net 4 cavity brass all pins. .360

Wasalmonslayer- looks like this one might not be on your list?

[Wasalmonslayer]

Thanks Lakehouse!!

I don’t know how that one slipped by I will get him put on the buy.

[Wasalmonslayer]

If available I'll jump in on this one. Awebb (at) teamwebb (dot) net 4 cavity brass all pins. .360

Got you down

Thanks!

[Wasalmonslayer]

Please remove me from this buy. Thank you.

Sent from my Pixel 2 using Tapatalk

Got you pulled off the buy.

[Glockinstein40]

How does this bullet shoot in Magnum velocities?

[Wasalmonslayer]

How does this bullet shoot in Magnum velocities?

I have shot it to 1100 FPS and it was very accurate that is my go to load.
5 grns hp38 in mag brass crimped well.

Shoots to point of aim and wastes squirrels with authority.

[respiegel]

If there is still time I'd like a 4 cavity HP hitek design in .358, respiegel (at) yahoo (dot) com

[Wasalmonslayer]

If there is still time I'd like a 4 cavity HP hitek design in .358, respiegel (at) yahoo (dot) com


Got you fixed up

Thank You!

[dogdoc]

I want a 6 cavity brass solid .360. Alfredhmitchell at gmail dot com

[Wasalmonslayer]

I want a 6 cavity brass solid .360. Alfredhmitchell at gmail dot com

Got you fixed up

Thank you!

[Reinhamre]

OK, but I can´t se me on the list yet!

[Thor's Daddy]

Please remove me from this buy. I'm listed as #9 on the HP list. rodrick dot reidsma at gmail dot com.

thanks

[Wasalmonslayer]

Please remove me from this buy. I'm listed as #9 on the HP list. rodrick dot reidsma at gmail dot com.

thanks

Got you removed

[Wasalmonslayer]

OK, but I can´t se me on the list yet!

Sorry about that...

You are on there now :)

[huntnman]

Please put me in for a 4 cavity, ht, .358, with pins. huntnman(at)swbell(dot)com

[Wasalmonslayer]

Please put me in for a 4 cavity, ht, .358, with pins. huntnman(at)swbell(dot)com

Got you all fixed up.

Thank you!

[Gisli]

Hi, I would like to have Regular lube groove solid 8 cavity Aluminum with handles.

[Wasalmonslayer]

Hi, I would like to have Regular lube groove solid 8 cavity Aluminum with handles.

Please give me your disguised email address and what diameter you would like.

Thank you

[Gisli]

Oops sorry , that would be .358.

tf3g at amsat. org

[Wasalmonslayer]

Oops sorry , that would be .358.

tf3g at amsat. org

Thank You!

Got you fixed up :)

[Dieselhorses]

Would like a 2 cavity Hi Tek HP in .358 with handles w/handles!

way2kajun AT YaHoO dot COM

[Wasalmonslayer]

Would like a 2 cavity Hi Tek HP in .358 with handles w/handles!

way2kajun AT YaHoO dot COM


Got you down

Thank you!

[Reinhamre]

Hi, Please change mine to .358 and NO handle. I just bought en set from MIHA online.

[Wasalmonslayer]

Hi, Please change mine to .358 and NO handle. I just bought en set from MIHA online.

Got you fixed up :)

[misterzr]

Please put me down for a NON HP Hi Tek solid - .358 6 cavity brass with a set of handles keith(dot)kohlruss(at)gmail(dot)com

[Wasalmonslayer]

Please put me down for a NON HP Hi Tek solid - .358 6 cavity brass with a set of handles keith(dot)kohlruss(at)gmail(dot)com

Got you fixed up.

Thank you!

[schemelschelm]

@Wasalmonslayer

Please change my Order back to 1x 6 Cavity NON HP, regular lube grooves, solid Brass, Dia. .358
vefa01-raps (at) freenet (dot) de

Thanks!

[Wasalmonslayer]

Got you fixed up :)

[schemelschelm]

Great, thanks! I got two MP Molds in brass here now and they are outstanding!
Thanks again.

[Wasalmonslayer]

Saturday bump

[Beau Cassidy]

Still open? I would like a brass 6-cavity slick sided solid at .360. O r thoNP Beau @ yahoo.com. Thanks.

[huntnman]

Please move me to the HI TEC no lube grove, four cavity hollow point, mold.

[Lakehouse2012]

Will you change my order to: .360 4-cav Brass HP w/grooves please


I'm in WASALMANASLAYER...

Sorgatz at ameritech d0t net - 6 cav brass solid at .360 regular lube groove mold please.

Thanks,
LAKEHOUSE2012

Sent from my SM-G950U using Tapatalk

[Wasalmonslayer]

Still open? I would like a brass 6-cavity slick sided solid at .360. O r thoNP Beau @ yahoo.com. Thanks.

Got you down

Thanks!

[Wasalmonslayer]

Please move me to the HI TEC no lube grove, four cavity hollow point, mold.

Got you fixed up

[Wasalmonslayer]

Will you change my order to: .360 4-cav Brass HP w/grooves please

Got you fixed up buddy!

[Dieselhorses]

Was wondering kind of time frame we looking at for the molds? Couple months?

[Wasalmonslayer]

Was wondering kind of time frame we looking at for the molds? Couple months?

Miha is working on many buys at one time.
I would guess we should be getting close this ones been in last call for a little while.

Have a great night!

[autodidact]

Please include me for one mold.

Hi Tek 4 Cavity HP .358

jbpaul at suddenlink dot net

Thanks,
JB

[Wasalmonslayer]

Please include me for one mold.

Hi Tek 4 Cavity HP .358

jbpaul at suddenlink dot net

Thanks,
JB


Got you fixed up.

Have a good night and Thank you!

[Wasalmonslayer]

Friday bump :)

[Lakehouse2012]

:) Sorry Wasalmonslayer- I'd like to make another change...

Will you move me from the HP Lube groove, to the HP Hitek please. Staying with .360 (this will be my final change....)

[Wasalmonslayer]

:) Sorry Wasalmonslayer- I'd like to make another change...

Will you move me from the HP Lube groove, to the HP Hitek please. Staying with .360 (this will be my final change....)

No worries buddy :)

Got you fixed up!

[RedStar Raider]

If it's not too late, I would like to get a hy-tec 2 Cavity HP all pins included, 358, handles please.
LRN2DRV1 at yahoo dot com
Thank you!

[Wasalmonslayer]

If it's not too late, I would like to get a hy-tec 2 Cavity HP all pins included, 358, handles please.
LRN2DRV1 at yahoo dot com
Thank you!

Not to late at all got you onboard.

Thank you!

[Wasalmonslayer]

Sunday bump

[RedStar Raider]

Not to late at all got you onboard.

Thank you!

NO!!!! THANK YOU!!! LOL

I got my first Miha mold a few days ago and what a piece of art!!! I can't wait for the next one to come, plus I'm on two more buys!!

[evoevil]

which HP come with mold

[Wasalmonslayer]

which HP come with mold


Miha has not given specifics yet but I am sure he will follow suit with all the other molds.
Big pin, small pin, blank.

[evoevil]

can this be in a gas check design

[Wasalmonslayer]

can this be in a gas check design


Sorry this one is spec’d as plain base only sorry :(
We would be another group buy run with another cherry to cut gas check.

[Wasalmonslayer]

Friday bump

[Wasalmonslayer]

Hollow point options are large & small round, penta, cup, blank.

Thanks for being patient guys!!

[Wasalmonslayer]

Friday bump :)

[dogdoc]

Please change mine from .360 to .358. All my guns have throats about 357. Thanks
Alfredhmitchell@gmail.com

[Wasalmonslayer]

Please change mine from .360 to .358. All my guns have throats about 357. Thanks
Alfredhmitchell@gmail.com



Got you fixed up :)

Thanks!

[Humbo]

One 8 Cavity Aluminum .358 for me please.
bardisattva at gmail dot com
Thanks!

[Wasalmonslayer]

One 8 Cavity Aluminum .358 for me please.
bardisattva at gmail dot com
Thanks!

Got you fixed up Humbo

Thank you!

[RedStar Raider]

Remove handles from my order please, I got in on the group buy.

[Wasalmonslayer]

Remove handles from my order please, I got in on the group buy.

Got you fixed up

Thanks!

[davidh0302]

I'm in for two NON HP Hi Tek solid 8 Cav Aluminum .360 molds
dh03021991 at gmail dot com
thanks a lot guys!!

[Wasalmonslayer]

I'm in for two NON HP Hi Tek solid 8 Cav Aluminum .360 molds
dh03021991 at gmail dot com
thanks a lot guys!!

Got you fixed up :)

Thank you!

[Wasalmonslayer]

Sunday morning bump :)

[LabGuy]

Please put me down for HP Regular Lube groove all pins 4 cavity 0.360
Lcel at hotmail dot com

[Wasalmonslayer]

Please put me down for HP Regular Lube groove all pins 4 cavity 0.360
Lcel at hotmail dot com

Got you fixed up

Thank You!

[Dennis Eugene]

One eight cavity solid aluminum .358 plus handles. Regular lube groove. Thanks Dennis. Kingcoats357 at yahoo doht com

[Wasalmonslayer]

One eight cavity solid aluminum .358 plus handles. Regular lube groove. Thanks Dennis. Kingcoats357 at yahoo doht com


Got you fixed up

Thank you!

[anothernewb]

Please edit my order to include the handles, and a top punch - if it's not already in there.

chaseaise at gmail dot com

[Wasalmonslayer]

Please edit my order to include the handles, and a top punch - if it's not already in there.

chaseaise at gmail dot com

Done deal top punch is included.

Thank you!

[Wasalmonslayer]

Memorial Day Bump :)

[anothernewb]

Change of plans with casting. Please take me off the list.

[Wasalmonslayer]

Change of plans with casting. Please take me off the list.


What is your email addy??
So I don’t have to search every page.

Thank you!

[wdr2]

one 6-cav brass solid 0.358
wrichins at gmail dot com

[anothernewb]

What is your email addy??
So I don’t have to search every page.

Thank you!
oh wow, duh. sorry about that. chaseaise at gmail dot com
had requested an 8 cavity, .358, alum, normal lub groove, with mold handles. #10 on the list.

[Wasalmonslayer]

oh wow, duh. sorry about that. chaseaise at gmail dot com
had requested an 8 cavity, .358, alum, normal lub groove, with mold handles. #10 on the list.

Thank you!

This one is close guys.
I believe he has ordered the cherry.

[panzergrenadier]

4 Cavity HP all pins .358

xinghaichi at gmail.com

[Wasalmonslayer]

4 Cavity HP all pins .358

xinghaichi at gmail.com

Got you in the list. I put you under regular lube groove because you did not specify.
If you want Hi Tek just let me know.

Thank you!

[panzergrenadier]

yes i want a Hi Tek 4 Cavity HP all pins .358, thank you for the remind！

[wdr2]

I haven’t made the list yet, so in case you missed my order:


one 6-cav brass solid 0.358
wrichins at gmail dot com

Thanks Much for putting this group buy together.

[Wasalmonslayer]

yes i want a Hi Tek 4 Cavity HP all pins .358, thank you for the remind！


Got you fixed up!

[Wasalmonslayer]

I haven’t made the list yet, so in case you missed my order:



Thanks Much for putting this group buy together.


You are welcome!

Sorry about missing you... You are on there now :)

[big bore nut]

Put me down for a 4 cavity .360 HP PB with all pins
greggoryashley at yahoo dot com

[Wasalmonslayer]

Put me down for a 4 cavity .360 HP PB with all pins
greggoryashley at yahoo dot com

Got you fixed up.

Thank you :)

[davidh0302]

Sorry guys i have to pull back, im out of this group buy. Please delete my two molds. I'll get the heavier 200gr in another group buy here.
Thanks a lot. I just love this forun [emoji7]

Gesendet von meinem HTC 10 mit Tapatalk

[Wasalmonslayer]

This one is now closed!

Thank you to all who have signed up!!!

[toallmy]

[smilie=w:[smilie=w::awesome::guntootsmiley:

[dogdoc]

What is the status of this one?

[Wasalmonslayer]

What is the status of this one?


Hurry up and wait.
My guess is we are getting really close. When Miha closes them he is usually mulling them.
Then he tests them assembled them and sends out PayPal’s.

[MiHec]

80% done... Need to machine cavities

[SvErD]

Hi, any extras available of this one?

I have the original RCBS 2 cavity version, but would like to increase production speed with a 6 or 8 cavity version...

[MiHec]

I will make some extras

[MstrEddy]

If not too late, please put me down for
- 8 Cavity solid Aluminum Hi-Tek .358 with handles
eddy martinez 13 (at) gmail (dot) com
33027 standard shipping

[bowfin]

If an extra 2 cavity plain base with HP pins is available, I would gladly buy it.

mjones23atneb.rrdotcom

[MiHec]

paypals are out!

If you missing one send me PM

[georgerkahn]

I received, and paid, my invoice for this delightful mould! Thank you!
geo

[Beau Cassidy]

Paid. Woo Hoo!

[Dieselhorses]

I paid for invoice but didn't see anything about handles. I reckon he'll bill me separately for them.

[toallmy]

My new mold came in today and looks like a piece of art , now to heat the brass beauty up a couple times to try it out . I have intentionally not loaded all my 38 brass so I will have some to load with this Boolit .:-D

[Beau Cassidy]

A little goodness from Slovenia...https://uploads.tapatalk-cdn.com/20180824/b02567a408cc685296a6a910b51f6181.jpghttps://uploads.tapatalk-cdn.com/20180824/99a205d3693045cade28e7ae83698f8e.jpghttps://uploads.tapatalk-cdn.com/20180824/dd4c7c42bdd613072bd786e7a246b005.jpghttps://uploads.tapatalk-cdn.com/20180824/e81dd0397044f1dc6a67d05c37f415be.jpghttps://uploads.tapatalk-cdn.com/20180824/2f7ef02037fcf8a85792d04ab8ececcb.jpg

Sent from my SM-G930V using Tapatalk

[RedStar Raider]

My new mold came in today, a day after my delayed 9mm, all is well!!!

[Dieselhorses]

:mrgreen:Received mould yesterday, impressive!:-D