btreanor
09-28-2017, 03:09 PM
********************ALL SPF- Thanks!*******************************
These dies and components came with an antique rifle that I've since sold and never got to play with. Too many projects and too little time! :( Anyway, I'd like to sell these items as one lot rather than break them up. If I don't get any takers, I will consider selling the individual items. I'm happy to answer any questions, but the first "I'll take it!" posted here followed by a PM trumps any "PM sent" or "I'll take it if....." types of posts. I would prefer payment with PayPal (gift/"friends & family") but will accept other forms of payment if you don't use that service. US sales only and no sales where prohibited. I'm not interested in any trades at this time. Here is a description of all of the items (pics are below):
1. Set of used CH4D dies with two shellholders. The previous owner told me that the two shellholders were for different types of brass, although I never used them myself. These normally go for around $200 new
2. 20 pcs. of brass manufactured from .348 Winchester brass. These cost $90 for 20 pcs. when bought new from Buffalo Arms, although I'm sure these have been fired multiple times.
3. Full box of 50 bullets from Buffalo Arms. These go for about $25 bucks new.
4. A SC Lyman 445599 mould with a hollow base. No handles are included. Although this is a minie designed for black powder, I bought this with the intention of using it for this caliber, although once again I never got around to it. It came to me with a bullet in the mould and it's still that way, so the sprue will need to be cut and the bullet removed before use. Not sure why this was done- maybe to reduce corrosion in the cavity during storage?
SPF All of the above for $150 shipped SPF
https://s26.postimg.org/mki0mnt11/Full_Size_Render.jpg (http://postimg.org/image/mki0mnt11/)https://s26.postimg.org/v07l45vw5/Full_Size_Render_1.jpg (http://postimg.org/image/v07l45vw5/)https://s26.postimg.org/7ai5fgxit/Full_Size_Render_2.jpg (http://postimg.org/image/7ai5fgxit/)
Thanks for looking!
These dies and components came with an antique rifle that I've since sold and never got to play with. Too many projects and too little time! :( Anyway, I'd like to sell these items as one lot rather than break them up. If I don't get any takers, I will consider selling the individual items. I'm happy to answer any questions, but the first "I'll take it!" posted here followed by a PM trumps any "PM sent" or "I'll take it if....." types of posts. I would prefer payment with PayPal (gift/"friends & family") but will accept other forms of payment if you don't use that service. US sales only and no sales where prohibited. I'm not interested in any trades at this time. Here is a description of all of the items (pics are below):
1. Set of used CH4D dies with two shellholders. The previous owner told me that the two shellholders were for different types of brass, although I never used them myself. These normally go for around $200 new
2. 20 pcs. of brass manufactured from .348 Winchester brass. These cost $90 for 20 pcs. when bought new from Buffalo Arms, although I'm sure these have been fired multiple times.
3. Full box of 50 bullets from Buffalo Arms. These go for about $25 bucks new.
4. A SC Lyman 445599 mould with a hollow base. No handles are included. Although this is a minie designed for black powder, I bought this with the intention of using it for this caliber, although once again I never got around to it. It came to me with a bullet in the mould and it's still that way, so the sprue will need to be cut and the bullet removed before use. Not sure why this was done- maybe to reduce corrosion in the cavity during storage?
SPF All of the above for $150 shipped SPF
https://s26.postimg.org/mki0mnt11/Full_Size_Render.jpg (http://postimg.org/image/mki0mnt11/)https://s26.postimg.org/v07l45vw5/Full_Size_Render_1.jpg (http://postimg.org/image/v07l45vw5/)https://s26.postimg.org/7ai5fgxit/Full_Size_Render_2.jpg (http://postimg.org/image/7ai5fgxit/)
Thanks for looking!