WTB . 352 Sizing die

[Lethemgo]

Need a .352 lyman sizing die for my 4500 to get my 351 WSL up and running. Thanks

[rintinglen]

Good luck! I have never seen a .352. I have a .349 RCBS.

i was able to make a 350 push throu die by buying a .338 sizer from lee and a 9mm ram. I enlarged the ,338 sizer using sand paper a piece of dowel and an electric drill. The I turned the ram down to fit my .350 sizer.

[mehavey]

HERE (https://www.buffaloarms.com/352-custom-bullet-sizing-die-for-lyman-rcbs-lubrisizers-bac352) you go... :drinks:

[BHill]

If you don't find one you may contact lathesmith with a PM. He did a great job for me on a out of the ordinary size.

[Lethemgo]

Yeah that's the plan if I can't find one just mod the lee...thanks

[reed1911]

Contact Lathesmith. His work is far better than most others and better pricing as well.