Bull Plate Lube

[Bullshop]

Want to announce a new product we will be offering. From the research I did on synthetic lube fibers a couple years ago we first came up with our BS#2 a black powder lube. #2 was intended to provide better performance than the current leader(spg) under servere conditions of heat and low humidity.
It has worked well and proved its worth with several top notch shooters claiming a second at the Quiggley, a first at Lodi and a first in womans A class at the Ratone nationals and the MT long range championship at Forsyth.
With what we learned from BS#2 we went on to make BS speed green that I am sure most here have heard about.
Now a new application. Here is a pic of a test I did today with the new sprue plate lube (Bull Plate).
These were the two 8mm group buys I started with new today. They were treated with bull plate on the bottom of the sprue plate, tops of blocks and all alignment surfaces.
I worked for one hour with each mold and went as fast as possible, cutting sprues while still soft(quivering). There were no lead smears at all, none. I even cut some while still liquid, still no smears. There was no galling or binding of any kind.
The blocks slipped together with ease aligning themselves easily.(I also treated the hinge pins).
These molds were used as is right from the box accept for the bull plate treatment. I counted one of the piles and got 274 and remember these are single cavities. Thats 274 in one hour from a single cavity.
I am well pleased with this sprue plate lube as I have never had the little Lee molds be so trouble free run so hot and fast. This has allowed a more constant mold temp for good consistency even with interruptions in casting rhythm.
It also allows to quench from the mold at a higher temp resulting in a harder boolit. I have been able to get straight WW close to 30 bhn this way but before waiting for sprues to harden barely over 20.
Todays casting was with straight ww. They are clean and well filled out with sharp edges.
As soon as we find containers we will add this to our web sight. Plan to have two oz. containers with instructions @ $2.50 + shipping. One 2 oz. bottle will last a looooong time. Casting just got easier.
BIC/BS
http://img.photobucket.com/albums/v239/bullshop/31dbcfcb.jpg

[Cherokee]

Let us know when ready to market.

[Bullshop]

Bull Plate is now ready and available. 2 OZ bottle @ $2.50 + shipping.
I have been using it for quite a while now and it is by far the best product I have ever used for the purpose. The ammount needed is so small a 2OZ bottle will out last most that will buy it!
Give it a try your shure to like it. I am sending out a few samples so you are shure to hear about it too. Guaranteed to reduce the frustration factor.
BIC/BS

[Calamity Jake]

Send me some, along with the bill I will get you a MO in the mail, you should have my address on hand we have done business before.

[PatMarlin]

Dan-

How do I order 10 sticks of speed green, and the plate lube?

Thanks,

Pat

[David R]

Do you take creidt card or Pyapal?

I would like to try it.

David

[castalott]

Me too! I want 2 bottles...( how is the old joke..."sign says 'all the corn you want for a $1' ......a man says I'll take $2 worth!!!)

Post your address & I'll send you a postal money order...

( Put all your products with shipping on it...I might buy a bunch of stuff)

Dale

[PatMarlin]

Dan needs to advertise in these threads more. Other manufacturers do, and sell like crazy when they promote, and talk about there products alot on forums.

Yeww got sum pockits burnun' wuth cash Dan!!

[Bullshop]

Send me some, along with the bill I will get you a MO in the mail, you should have my address on hand we have done business before.

Calamity Jake.

I am sorry I am bad about keeping addresses, so I don't have yours. Please Pm or email it to me, Thanks!

Bull Shop Mom

[Bullshop]

Dan-

How do I order 10 sticks of speed green, and the plate lube?

Thanks,

Pat

PatMarlin.
you can send the money to us... shipping for a flat rate box is 7.70. thanks!

Bull Shop Mom

[Bullshop]

Do you take creidt card or Pyapal?

I would like to try it.

David

David.

Yes, we take CC through paypal. But with paypal we loose money. They charge us .30 and 2.9 percent on all transactions. We do take personal checks.

thanks, Bull Shop Mom

[Bullshop]

Me too! I want 2 bottles...( how is the old joke..."sign says 'all the corn you want for a $1' ......a man says I'll take $2 worth!!!)

Post your address & I'll send you a postal money order...

( Put all your products with shipping on it...I might buy a bunch of stuff)

Dale

Dale.

You can go to the website for more info on products. http://www.bullshop.gunloads.com/
also a lot of Dan's bullets are on auction arms (not all of them, if you need something you don't see. ask! we either have it, or will do a custom order.)
http://www.auctionarms.com/search/auctions.aspx?&ad=bullet%20man%20dan

thanks. Bull Shop Mom

[David R]

Now that there is money involved, BS mom gets in volved :) :)

I would like to send pay pal and add the extra you get charged. It makes my life easier.

PM Sent

David

[Bullshop]

Now that there is money involved, BS mom gets in volved :) :)

I would like to send pay pal and add the extra you get charged. It makes my life easier.

PM Sent

David
David
Yes I too have been infectid with the female virus. It has become so engrained in all functions the systam can no longer operate without it!
BIC/BS

[PatMarlin]

She knows when we've been bad or good here at cast boolits... :mrgreen:

[castalott]

Sounds Good!

I'll send a postal MO monday for 3 bottles of 'Bull Shop' mold lube plus shipping.

Dale

[Calamity Jake]

Bullshop you have a PM.

[MGySgt]

Bull Plate is now ready and available. 2 OZ bottle @ $2.50 + shipping.

Give it a try your shure to like it. I am sending out a few samples so you are shure to hear about it too. Guaranteed to reduce the frustration factor.
BIC/BS

BS - Dumb question - Why do you display your old link to your web site instead of your new link????

Drew

[Bullshop]

BS - Dumb question - Why do you display your old link to your web site instead of your new link????

Drew
Sorry but I am a computer dumb dumb. The female protective system should have detected and corrected the problem. Will have to take it in for maintenance and lubrication. They seem to run more smoothly after that. Link will be corrected soon. Thanks for the not so dumb question.
BIC/BS

[SharpsShooter]

BullShop,

Would you mind posting a detailed description of how and where youi apply this magical substance. I want to be sure I use it correctly when it arrives.

Thanks

[Bullshop]

BullShop,

Would you mind posting a detailed description of how and where youi apply this magical substance. I want to be sure I use it correctly when it arrives.

Thanks
SharpsShooter
There will be instructions included with every order

Instructions for use of Bull Plate Lube
Bring mould up to casting temperature and fill cavities with alloy.
Be sure to have complete base fill out to avoid getting Bull Plate Lube in the cavities.
Cut the sprue and keep blocks together with boolits in cavities.
Lightly dampen a Q-tip with Bull Plate Lube and spread a light film of lube on the mould block top surface and bottom of sprue plate.
With a clean Q-tip wipe away any excess lube from both surfaces. Only a very small amount is needed.
Also apply to alignment pins and hinge points.
New or very clean mould may require more than one treatment. Reapply at the first sign of any drag on opening or closing sprue plate.
Repeat procedure at the beginning of each casting session.

I have been able to work extreamly fast with this lube, even cutting sprues while still soft enough to wiggle. The only time limiting factor has not been the sprue but the boolit itself. On very large cavities like 500 to 600gn I have cut the sprue without any hint of a smear but on opening the blocks found the alloy in the cavity not yet completely hard, and a small amount running out at the nose.
I ran a large order of 700gn 50 cal very fast and quenched them. I use an enclosed troth with baffel to carry boolits to the quench. On inspection I found many of the fairly long boolits were bent and had to trash the order and start over. I found there was a few second waighting time for the boolit to harden enough to survive the ride to the quench but even on this three cavity 700gn 50 cal mold there was only a 2 second wait to cut the sprue. I have found that waiting for the sprue to just quit quivering is more than enough time. I am not talking about the color change to the sprue being hard I mean as soon as it doesnt wiggle which on lets say a double cavity 30 cal 200gn is 1 to 2 seconds. Waighting for the sprue to harden or helping it harden some way is what I dont want. I want to cut the sprue while it is soft so it cuts easily. I use my gloved hands to cut the sprue by gently turning the plate while holding gentil downward pressure at the same time.
This allows a more constant temp for best consistancy with no chance of warpage to the plate or blocks. If you check my origonal post on this thread you will see I was able to run 274 boolits in a timed one hour period from a new Lee single cavity for the 220gn and 250gn 8mm boolits. Weight check on these showed them to be extreamly constistant and visualy they are clean and well filled out with sharp edges on the bands and base. This was with straight WW alloy run at 600F. I dont think there is any way to go faster. I doubt the sprue cooling system is even as fast, but I know it is harder on molds.
I am shure I will get some static on my views of running at a lower alloy temp and cutting soft sprues, and not hitting the plate but as I have seen said here this is what works for me. There is always more than one way to do something and I dont think anyone can argue that the points I have made are not true. Sorry about the long answer but I have a lot to say on the subject.
BIC/BS

[SharpsShooter]

BullShop,

Thanks for the info. If I had known you would be sending the instructions with the lube, I wouldn't have troubled you. Don't worry about the long post. Detail is a good thing.

[PatMarlin]

I don't know what my mold pot temp is, but it's cast iron, heated by propane, and I can regulate it pretty well.

I never use a mallot, and easily cut my spruces by hand. No striking with a club here.

I'm going to wait your plate lube, befor I starte casting.

So Dan- does the plate lube eliminate the need for a graphite pencil?

[Bullshop]

Pat
Yes this has eliminated the need for any other lube. In the test done with the two NEW Lee molds they were new from the box and nothing was used on them accept Bull Plate. At first I was still using the pensil out of habbit but since that test I use nothing else.
SharpsShooter
I want to correct the 600F casting temp posted yesterday. I have not checked with a thermometer but for most molds just run with the dial on the RCBS set well below the lowest setting of 650F. I have had this pot rebuilt by RCBS twice and have a back up that has also been rebuilt be them. Each time they have upgraded and recalibrated the thermostatic control to be true with the reading on the dial. What I should have said was below 650F as I am not shure of the exact temp but it is most likely over 600F.
There is no need to run a pot at its highest setting, this just adds time to the boolit hardening process and increases the possibility of damage to the mold and plate especialy aluminum. A temp that will keep the sprue molten for at least one to two seconds after the pour is what works best for me. If the sprue stays molten longer the alloy temp is probably higher than need be.
The trick is to work fast to keep mold temp fluctuation between pour and drop at a minimum. A minimum temp fluctuation here leads to very consistant boolit weight.
Well there I go again!
BIC/BS

[StarMetal]

Dan,

Little off subject but how you doin up there in freezing land? Hey being Xmas is close and Santa passes through your way first, how about a heads up on when he's coming? Make sure he doesn't take any hits from those 45-70's of yours, besides reindeer aren't as tasty as eld and moose.

Joe

[Bullshop]

Dan,

Little off subject but how you doin up there in freezing land? Hey being Xmas is close and Santa passes through your way first, how about a heads up on when he's coming? Make sure he doesn't take any hits from those 45-70's of yours, besides reindeer aren't as tasty as eld and moose.

Joe
Joe
Whats going on? I read your last couple posts and I am seeing a kinder gentler Joe. In the Spirit ? Let Him in and He changes you heart. I love it!!!
We are all fine here sittin by the big stove. No fly by's yet accept from Eilson AFB. We happen to be in an uninhabited training area and often feel/hear the concushion from bomb training. BS Jr is on restriction for failier to comply with shop tool return policy so arial traffic is temperarily safe.
Enjoy the holliday and the gift, Jesus! God bless you brother!
BIC/Friend
Daniel

[1Shirt]

Whats the postage on a couple of bottles of the stuff, and how do you apply it. Want a couple of bts. to start with and will have ck. in mail as soon as I know totals. Thanks.
1Shirt

[SharpsShooter]

1shirt,

I won't quote prices for Bullshop, but I asked about application too. He posted the answer on this thread #21 I believe.

[PatMarlin]

Whoa-

Thanks Dan... Got my speed green and plate lube today. That was quick!

I forgot to ask... is that speed green to hard to use in my lyman 45's, cause I don't have a heater?

[Bullshop]

Pat
No heater neaded.
BIC/BS

[MGySgt]

Bull Plate is now ready and available. 2 OZ bottle @ $2.50 + shipping.
I have been using it for quite a while now and it is by far the best product I have ever used for the purpose. The ammount needed is so small a 2OZ bottle will out last most that will buy it!
Give it a try your shure to like it. I am sending out a few samples so you are shure to hear about it too. Guaranteed to reduce the frustration factor.
BIC/BS

Price go up that quick? Your web site now shows $4.00 for 2 oz. I guess I need to order some before it goes up any more.

Drew

[MGySgt]

Where the heck is your Order Form? Trying to fill out an order for to send you a check.

Drew

[PatMarlin]

I think that was an introductory offer. A bargin at much more... ;)

[Bullshop]

MGySgt
No order form yet just email your wants.
Yes there has been an unavoidable price increase. I have been haggling with my supplier all week. I order once a year and my price, and shipping has gone up since the last time.
I was giving everyone here a chance to order at the introductory (thanks Pat) price before I mentioned it on the board. I will give another week or so before I hold anyone to the price increase.
We have another little surprise planned for the not too distant future, so stay tuned.
BIC/BS

[MGySgt]

E-mail Sent - I will include a copy of it with the check.

Drew

[Bullshop]

got two checks today - both over payments - BEN1025 - you sent too much for just one bottle and shipping, do you want me to send as many as i can for that amount?

and the other one, i am not sure of the *board name* and don't wanna post the *real* name - the initials are D.H. - i have been sending smaller oreders out on the priority mail flat rate envelopes for 3.85 - maybe first class would be cheaper, not sure if i can ship 3 for the first class, with packaging etc. but i can get 3 in a flat rate. do you want me to just add another one for the shipping difference? or try to do 3 in a first class and refund the difference?

thanks ! - Bull Shop Mom

[mike in co]

i'll take a couple............

[Bullshop]

i'll take a couple............

Mike in CO,

for right now, we are still selling to you all for 2.50 a bottle - shipping is 3.85 in a priority mail flat rate envelope.. you can send check to the address on the website...

thank you!
Bull Shop Mom

[ben1025]

Send 2 bottles and buy a cup of coffee with what is left over. ben1025

[mike in co]

Mike in CO,

for right now, we are still selling to you all for 2.50 a bottle - shipping is 3.85 in a priority mail flat rate envelope.. you can send check to the address on the website...

thank you!
Bull Shop Mom
check went out today for 3 plus shipping
thanks
mike

[David R]

I just poured some 58 gr lovern style lyman 22 cal boolits.

Started with the pot on 850. When the sprues started to take too long to cool, I turned it down to 750 and kept on pouring.

For the first time I got my 22 cal mold over 250*f. I check it with an infared thermometer on the bottom of the mold. All my molds pour best around 250 to 300.

I only poured about 100 because I was air cooling them for an expiermtnt. I weighed 50 or so, all were within .5 grains except 2 I threw back in the pot. Some of the best looking 22 cal boolits I ever poured.....White Gold!

This stuff is the Balls!

[buck1]

Bullshop , I got mine today!!! Thanks for cutting us a special Introduction deal!! $2.50 was too cheap .....Buck

[hopper_64]

Got my Bull plate and bulletlube today. Thanks again.

Happy New Year!!

[mike in co]

i got mine awhile back, but only just for to use some.
the lee 6 pack 311407.......stuff worked just fine..........on the batch of about 200 plus i did.
thanks
mike

[fiberoptik]

Mike in CO,

for right now, we are still selling to you all for 2.50 a bottle - shipping is 3.85 in a priority mail flat rate envelope.. you can send check to the address on the website...

thank you!
Bull Shop Mom
I'd like 2 bottles and a stick of speed green & #2. It's easier for me to paypal it, and include the difference than to mail ya a check. Gimme the particulars, and I'll make er happen.

[powderburnerr]

been using bullplate for awhile and have cleaned up almost all my moulds the stuff works ... I still cast hot and even if I get flecks of lead they just fall off with a sweep of the q-tip so far I have used about 4 q tips .it does go a long ways,,,, I shake th bottle and wipe the inside of the lid then to the mould I set the q tip aside and recover as needed it dont evaporate off the q tip and seems to work even after days of setting on the shelf .as long as it will dampnen the plate it is effective. a bottle will last probably 2 lifetimes if you dont spill it.......... Dean

[Topper]

Finally got a chance to try Bull Plate lub this weekend.
My past experience has only been with Lee aluminum blocks, always had problems with gauling.
This product really works well.
Tested on a new Lee 45cal mold and no gauling, no lead build up on sprue plate.

[Pop_No_Kick]

I LIKE THAT GREEN STICK LUBE FROM THE BULL SHOP
OH SO DOES ALL MY COLTS, AND MIL. RIFLES.. !
GREAT STUFF !!. MAKES MY BORE LOOK PURTY TOO !!

THANX'S BULL SHOP..

CHUCK :drinks: :castmine:

[Bullshop]

*****Good news...my order of magic juice showed up yesterday and boy does it work!.....can't believe I can cut the spures with a wet puddle and not smear lead on the blocks or spure plate....now I have to re-learn my timing as I am dumping the bullets to soon in the water filled bucket.....some of them are cracked....either slow down or see if my pot will work with out freezing up below 700*....thanks again......mike*****

[swampmaster]

Planning on ordering some Speed green and some bull plate Is the Speed green some of the better stuff to use on rifle bullets? I have not any before and would like to start the correct way the first time

[Bullshop]

Planning on ordering some Speed green and some bull plate Is the Speed green some of the better stuff to use on rifle bullets? I have not any before and would like to start the correct way the first time
Speed Green works equaly well in rifle or handgun in hot or cold weather.
It realy shines for high velocity rifle loads. There are plenty of lube choices that work but SG is the best I have ever used. If you want to make your own ther is nothing more simple than combining Bull Plate with bee wax to make up your own batch of lube that simply just cant be beat.
Lots of choices but none better.
BIC/BS

[swampmaster]

Glad to hear that watch, for a incoming order for a bundle of 10 Sg and 3 Bull plate

[twotoescharlie]

I have been using Imperial sizing wax for several years. recently got some of the Bull sizing lube,tried it on several different calibers including reforming cases.
got to say, I believe it is superior to anything that I have used for sizing and reforming.
thanks for a good product!!!


TTC

[Bullshop]

*****
hobbles;
You might consider some of Bullshop's sprue plate lube. I have found that it lubricates the locating grooves and "V's" on the Lee moulds so that the mould halves "slide" into place. They are no longer "sticky". Absolutely the best lube for the "lube points" on Lee moulds to be had.

Dale53
*****

[Sundogg1911]

Got my Bull Plate Lube and got to try it out on Sunday. This stuff is great! I also used it to lube some of the metal against metal parts in the master caster, and it works great for that too! I highly recomend it to everyone. No casting bench can be complete without a bottle!
Thanks!

[smokemjoe]

I never heard of this plate lub. before until today, I got a 4 cav. mold form kenjuudo and he treated the plate with it, I casted at 850 Deg. run 1900 bullets and no lead smearing, I didnt know what it was until I read this now, Thanks for some great stuff. L et me know how you put it on, Smokemjoe

[fatelvis]

I tried Bull-Plate yesterday on a Lee mould, and a cast iron Lyman mould. It worked great (just as advertised). No more smeared lead arcs on the mould tops. Thanks Bullshop!

[cattleskinner]

Bullshop,

I just wanted to let you know that I recieved the sprue plate lube in the mail today. Thanks again.

-Amos

[PatMarlin]

Dan's lube saves molds.

Last night I cast a whack of boolits. How can you beat Catshooter's Lee GB's with 45 2.1 designs, Dan's Bullshop plate lube and..."Hold you ears" -PMWFCFF...
:mrgreen:

What a combination... :Fire:

[45 2.1]

Good stuff. The forming lube is the right consistency during the summer, but from this time on in the fall and winter, it is just too hard. Whats the carrier so I can thin it properely.

[Bullshop]

Say Pat I really like that, one stop shopping. You can get everything you need right here at cast boolits. Dont even have to burn any gas to get here. Dontyaluvit!
BIC/BS

[PatMarlin]

The castboolit empire is growing.. :mrgreen:

[Castinoff]

I sent an order for sprue plate lube (1) before I saw the post about closing until spring 2008. Got a couple new molds coming & I could sure use some. Anybody out there got an extra?

[Bullshop]

Not to worry, here am I so order at will.
BIC/BS

[clintsfolly]

Bullshop hi need a price on 4 bottes of sprue plate lube and shipping to 48837 thanks clint

[colbyjack]

Bull Plate Sprue Plate Lube whats the shipping on 1? is it the box rate or the lube rate?

how much would 100, 200 grain cast hollow point bullets for a .45 acp cost. thanks -chris

email or PM thanks colbyjack8803@mchsi.com

[Typecaster]

Dan—

Iffen you ever want to change the name, how about "Caster Oil"?

I'm impressed with it, both for sprue plates and as resizing lube...a little goes a looooong way.

[noclue]

Bullshop, I forgot to tell you. I tried the bullplate lube you sent and as you knew it would be, it was perfect on two different six gang Lee molds. It worked first time on both. Lots of good boolits.

[kartooo]

yrs ago i used the wax from a toilet bowl johnny ring. This sure is a step up. Good stuff,fast shipping and you only need a little dab.

[oscar]

Bullshop,

Kindly quote on 2x Sprue Plate Lube + 10 Speed Green Lube to South Africa.
Quickest seems to be USPS, get stuff regularly from Brownell's that way.

Regards
Oscar

[Bullshop]

**NOTE** --- please if you have ordering questions - either PM or emial bullshop@wildak.net - we don't have time to visit on the board so things will not be seen.
thanks!

Bull Shop Mom

[oscar]

Bullshop & all other prospective customers,

Just to thank you guys at Bullshop for my order.

Anyone would call it promp service. Placed my order on June 12, it arrived at my Post Office in Pretoria, South Africa on June 26.

Would report on your products soon.

Regards
Oscar

[fred2892]

Just an agreement with Oscars post above. Placed my order on July 8 and it arrived today July 17 in the UK. Thanks Bullshop! fast, efficient and courteous.

Fred.

[Castnshoot]

I'd like to know, I'm about to order some too.

[larry h]

Dan,
I'll take (2) bottles. What is the cost of the shipping? I'll get the money of to ya today. Thank You.
R/Larry

[armoredman]

Hope Bullplate Lube is still available, I am almost dry, down to last few drops.

[wilddog45]

I would like to buy some but it seems like your site is under construction and will not load.

[Recluse]

I would like to buy some but it seems like your site is under construction and will not load.

I think I've got his information written down somewhere out in the shop. I'll see if I can dig it up and post it for you.

:coffee:

[Bullshop]

To order email bullshop@wildak.net
Larry H
2 bottles is $11.50 total to anywhere in the USA.
BIC/BS

[Stick_man]

OK, here is a question about the Speed Green. I am just starting into casting my own, so am looking for options to keep my costs down a bit. For those of us who cannot yet afford a lubrisizer, can the Speed Green be heated up and used as a "pan" or "tumble" type lube? I have the Lee sizer dies and was thinking I would be relegated to the liquid alox type lubes. Would this work as a pan lube?

[PatMarlin]

I'm sure Dan will tell you how to do that. I like that speed green.

[outdoorfan]

OK, here is a question about the Speed Green. I am just starting into casting my own, so am looking for options to keep my costs down a bit. For those of us who cannot yet afford a lubrisizer, can the Speed Green be heated up and used as a "pan" or "tumble" type lube? I have the Lee sizer dies and was thinking I would be relegated to the liquid alox type lubes. Would this work as a pan lube?


SG works for pan lubing.

[frank l jr]

Me too! I want 2 bottles...( how is the old joke..."sign says 'all the corn you want for a $1' ......a man says I'll take $2 worth!!!)

Post your address & I'll send you a postal money order...

( Put all your products with shipping on it...I might buy a bunch of stuff)

Dale

sorry nomessage

[MGySgt]

Dale - Look at the bottom of this page - Bullshops link is there.

[Chris]

Do you good folks still take paypal if I cover the fees?

[bubba.50]

i have went to the bullshop site from two or three different angles and cannot find a price or ordering info for bullplate.......help!

[markinalpine]

I e-mailed him and got a reply right back. Sent him a postal money order. Forgot what he charged, though.
Mark :coffeecom

Here's the e-mail address: bullshop@wildak.net

[C.F.Plinker]

These are the prices for Bullplate that he just e-mailed me.

Shipping depends on how many bottles you want.
1 bottle $6.50 total
2 bottles is $11.50 total
3 is $15.50 total
4 is $21.00 total
Anywhere in the US

[Bullshop Junior]

This is from a friend or ours.
Used with permission.
It was sent to as after the Bullplate poll was started.




I have no idea how long a bottle of Bullplate will last, ten years I guess. What I know for sure is that I don't want to be without it. I am a ladle caster. My experience has been that if I dip a Q-Tip into the BP until 1/3 of the cotton is wet, I have plenty for a one or two cavity mould. For four cavity moulds I need to use maybe 1/2 the cotton wet. Then I wipe it off as the instructions say. I shoot about 4,000 CB a year. My casting sessions are about 2-3 hours and one application of BP usually is all that is needed for a session. One of these days I need to order an extra bottle just in case I spill it. There wasn't enough space in the poll for all I wanted to say about BP. You can consider this an unsolicited testimonial. I have given a couple of bottles to friends, gotta get back to them to see what their opinion is.

[sargenv]

Well, I received my order today and unfortunately it will be at least a week before I'll have time to try it out. Thanks for the speedy delivery! :)

[Bullshop Junior]

I found somthing you DO NOT use bullplate for yesterday. You DO NOT put on guitar tuning machines. Made them so slick, the strings pull the backwards now, and it won't stay in tune AT ALL!