PDA

View Full Version : first smelting



copdills
08-01-2008, 01:57 PM
didn't have alot of wheel weights but made 33 lbs of ingots not too Bad and I learned alot also WW's already had some oil on then and I used a little wax and saw dust to flux with, the whole process didn't take long at all with the small amount of WW's , hey but it will grow LOL

Thanks for all your HELP:castmine:

copdills

ANeat
08-01-2008, 04:50 PM
Good job;:drinks: That will make a lot of bullets. All that crud on the WW just makes good flux. Hope it wasnt to hot for ya. This usually isnt my favorite time of the year to smelt.:holysheep

jawjaboy
08-01-2008, 05:32 PM
Good ta hear! 33 pounds is way more gooder than 0 pounds ain't it CD? :-D

copdills
08-01-2008, 06:47 PM
I got lots of shade it wasn't too hot, and yep thats 33 more pounds LOL ( Adam) I went thru the 100 lbs I got from you, it made some pretty 45's & 44's and a few 9mm I think I am addicted NOW LOL
Thanks copdills

RustyFN
08-01-2008, 07:27 PM
Way to go CD, off to a good start.
Rusty