Wts: BT Sniper .45 Swaging dies

[mckenziedrums]

I picked these up a couple years ago with intention of swaging 45 but never got around to it. This is the 2 die set ( Core seat + Point form) plus the expanding mandrel to convert 40 into jackets and also includes 2 auto ejection frames. One for I believe the Lee classic press (could be for the RC though, I don't recall) and the other is definitely for the Walnut hill. Total cost new on the entire package would be close to $1200 I believe. I may not have the new ram top for the Lee frame but I'm willing to bet Brian keeps those in stock and at this price it's still a smoking deal.

Looking to get $690 shipped. That's roughly the cost of the two dies with the expander and ejection frame being free. (The other bar for the frame is here, just missed it in the photo) Mailed payment or Paypal is fine. Additionally, I can send an invoice via Paypal and if you have Paypal credit they'll do 0% for 6 months. Helps with the expense of swage dies!

EDIT: I just found the frame I purchased to use these with the Walnut Hill press... I'll include that with the package to sweeten the deal even a bit more :) Fairly certain it is complete.

https://uploads.tapatalk-cdn.com/20170803/34d6dcba2242081326e27fc7e0e04343.jpg

[SSGOldfart]

Hmmm what size and weight are the finished bullets.451 or.452 ??

[mckenziedrums]

Hmmm what size and weight are the finished bullets.451 or.452 ??I'll measure the sample bullets later this morning but weight can vary based on jacket length. If you need heavy bullets you buy longer jackets. I believe a standard 230 is easily made with 40 brass though

[mckenziedrums]

Here's a good thread for reference: http://castboolits.gunloads.com/showthread.php?t=132183. Only thing missing is the notching die (I have it but plan on keeping it for other calibers I swage)

[mckenziedrums]

Both sample bullets I have measure .4515

The point form die is set up to make hollow point bullets. If you want the xtp style grooves you just need to add that die.

Here are the bullet samples:
201082

Pricing as I understand it would be $695 for the 2 dies, $175 for the expanding mandrel, $195 for the Walnut hill ejection frame and $195 for the Lee ejection setup. So to order this would be about 1200. I'm not sure if I have the new ram top that goes with the ejection frame but I'm sure Brian can help out there.

[GRUMPA]

Those will also do the 45LC boolits as well.
http://castboolits.gunloads.com/attachment.php?attachmentid=88889&d=1385674108

When I do mine I used an 8mm AirSoft BB so it acts more like a Ballistic Tip, really expands on contact, and its a sure bet whatever receives the impact isn't going to like it.

http://castboolits.gunloads.com/attachment.php?attachmentid=88895&d=1385674213

This is after it goes thru gelatin.

http://castboolits.gunloads.com/attachment.php?attachmentid=88891&d=1385674154

[guywitha3006]

Pm incoming.

[mckenziedrums]

Sold, thanks for the interest fellas!