Wtb: Can someone make me a magazine plug?

[prsman23]

For a Rossi m92 in 357?
Can't buy one from Rossi and I've tried other plugs from different manufacturers that do not work.



Sent from my iPhone using Tapatalk

[whtsmoke]

A person would need dimensions of the tube and any holes drilled in it, if you get these post them as I would like to see what they are.

[deltaenterprizes]

Use a pencil or a wooden dowel

[Texas Tinker]

http://store.stevesgunz.com/

Steve's is a 92 specialist Gunsmith and store. They carry aluminum replacements for the plastic plugs that are factory from Rossi.

[kungfustyle]

http://www.thesmithshop.com/magfollow.html

[sparky45]

Steve's Gunz is where I got mine; perfect fit and SS or Al.

[Smoke4320]

Stevez guns .. bought 2 for different calibers they fit perfectly

[Speedo66]

Not hard to make one yourself from empty cartridge cases. Here's a link to a thread where I describe how I made one.

http://rossi-rifleman.com/viewtopic.php?f=9&t=3738&p=41351&hilit=homemade+magazine+follower#p41351

You can also buy one here at the Smith Shop: http://www.thesmithshop.com/magfollow.html

[prsman23]

Ah. Not the follower. The end cap so to soeak


Sent from my iPhone using Tapatalk

[whtsmoke]

measure it and see what size it is

[prsman23]

.454 in diameter
The lip? Of the top is .558
Takes a small screw to hold it in.
https://uploads.tapatalk-cdn.com/20170713/a26b63c204a03e88c95b38179ce2dccf.jpg
https://uploads.tapatalk-cdn.com/20170713/f606950fd5cb475faf29a782a643544c.jpghttps://uploads.tapatalk-cdn.com/20170713/afd8e60cceec735555e63c12aba60935.jpg


Sent from my iPhone using Tapatalk

[kingstrider]

A machine shop could probably spin one out without much effort.

[Latheman]

send me a sketch. It shouldnt be too hard.

[prsman23]

Will do latheman! At work now. Probably in the a.m.


Sent from my iPhone using Tapatalk