MOA
06-30-2017, 09:06 AM
For those of you out there who own a Master Caster from Magma Engineering they have a nice addition. I have a number of moulds that have a pin in the bottom for a hollow base as for my 20 and 12 gauge sabot slugs. I like to pour lots of lead quick for such large castings and while talking with Eric about a tray or guide to set the mould on so I could use the bottom pour feature of the Master Caster when casting large boolits he directed me to a product they now have where all you do is undo the two bolts holding the casting pot on the Master Caster and bolt it to the new stand which has all the adjustments you need to use for hand casting these type of moulds that have a pin in it. Here is what it looks like. I am for sure going to be ordering one for my bench, SWEET.
https://s19.postimg.org/89b457m2r/new_images_June_9_2017.jpg (https://postimg.org/image/dxhew3qf3/)
https://s19.postimg.org/89b457m2r/new_images_June_9_2017.jpg (https://postimg.org/image/dxhew3qf3/)