Mihec 9mm SWC H&G 275 clone rerun

[Wasalmonslayer]

9mm SWC (HG#275 clone) - 125 grain, 8 cav aluminum mold from MP Molds (MiHec)
This is group buy for .359 as cast, 125gn (drops around 127 grain) SWC, 6cav brass mold. No problem sizing down to .356, too.
Mold is HG#275 clone.

It is very accurate loaded to 27mm OAL over 3,2 grains VV N320.
Some pictures are listed in the old thread.

Price will be 95 Euros shipped
Allen keys, RCBS/Lyman style top punch and some mold lube are included in price.

GROUP BUY DISCOUNT OF 15% GIVEN AT TIME OF INVOICE

Options:
1. Bevel base or flat base
2. Lube groove or no lube groove


Link to previous buy: http://castboolits.gunloads.com/show...P-Molds-(MiHec)

Please post your email address disguised and which configuration of mold you would like.

197903197904
197905

[Wasalmonslayer]

List of mold buyers -

Hi Tek list

1) bzajdek at hotmail dot com - 8 Cav flat base hi tek
2) Hamturret at bellsouth dot net - 8 cavity hi tek plain base
3) bad22inc at gmail dot com - 8 Cavity hi tek bevel base
4) Jesse...period...W...period...Bell...at...gmail... period...com - 6 cav brass hi tek bevel base
5) Jesse...period...W...period...Bell...at...gmail... period...com - 6 cav brass hi tek bevel base
6) reinhamre at bahnhof dot se - 6 cav brass hi tek bevel base
7) Lybeck75 at gmail dot com - 6 cav brass hi tek flat base
8) billcor53 at yahoo dot com - 8 cav Aluminum hi tek flat base
9) meotai at yahoo dot com - 8 cav Aluminum hi tek flat base
10) C_bevan... at... Yahoo... Dot... Com - 6 Cav Brass hi tek bevel base
11) henrik at henrikochmaria dot se - 6 Cav Brass hi tek bevel base
12) w (underscore ) lance at verizon (dot) net 6 Cav Brass hi tek Flat base
13) Dirtjumper895 at g mail dot com 8 Cav Aluminum hi tek bevel Base
14) Silverjay7 at gmail dot com - 8 Cav Aluminum hi tek flat base
15) meotai at yahoo dot com - 8 cav Aluminum hi tek flat base
16) rockwell 5926 at gmail dot com - 6 Cav Brass hi tek flat base
17) kevin underscore c #fifteen#twenty at ya ho o d o t c o m - 8 Cavity Hi tek bevel base
18) raedwards77 at g mail dot com - 8 Cav Aluminum hi tek bevel base
19) davelandvatter At yaH00 dot com - 6 Cavity Brass hi tek flat base
20)
21)
22)


Traditional lube list

1) Anthony B 45 at verizon dot net - 8 Cavity Aluminum Flat Base
2) woody290 at cox dot net - 8 Cavity Aluminum Bevel Base
3) deo... period... gratia... three.. three.... at.... yahoo... period... com - 8 Cavity Aluminum Bevel Base
4) hicard21atoutlookdotcom - 6 Cavity Brass Bevel Base
5) Amadaus 101 at hotmail dot com - 8 Cavity Aluminum Flat Base
6) sargenv at s b c global dot n e t - 8 Cavity Aluminum Flat Base
7) nclem at ffni dot com - 6 Cavity Brass Bevel Base
8) jason AT kates D0T ORG - 6 Cavity Brass bevel base
9) Worgen (dot) wiki (at) gmail (dot) com - 6 Cavity Brass Bevel Base with a set of handles
10) Awebb (at) teamwebb (dot) net - 6 Cavity Brass Flat Base
11)
12)
11)

[Wasalmonslayer]

Was just informed by Mihec we can also get these in the hi tek smooth sided as an option in this buy.

[Wasalmonslayer]

Ok I will break the ice [smilie=l:
This is a dandy bullet for 9mm and 38/357.

[Warhead]

I want in please!!!

8 cavity no lube groove plain base.
Hamturret at bellsouth dot net

[DAFzipper]

[emoji106] One 8 cavity bevel base, no lube grooves for powder coating please.
bad22inc at gmail dot com

Sent from my SM-T713 using Tapatalk

[Wasalmonslayer]

Lists Updated

Thanks Guys!

[Wasalmonslayer]

Evening bump

[AZRedleg]

Sign me up for (2) two molds.

1. Both bevel base.
2. Both no lube groove.
3. Both 6 cavity brass.

Jesse...period...W...period...Bell...at...gmail... period...com

[Wasalmonslayer]

Updated

[AZRedleg]

I'm on the hi-tek list which is correct.

I prefer bevel base (not specified on the list)

Thanks

[Wasalmonslayer]

Azredleg fixed up your order to bevel base

[Reinhamre]

reinhamre at bahnhof dot se 6 cav brass bevel base hi tec

[Wasalmonslayer]

Updated

Thanks Guys

[Wasalmonslayer]

Sunday evening bump

[Wasalmonslayer]

Friday bump :drinks:

[Wasalmonslayer]

Happy Thursday Bump

[DAFzipper]

Though this one would attract more interest. Have same style for my 45 ACP and love it for paper punching. Can't wait to get this one for the 9mm

Sent from my SM-T713 using Tapatalk

[Gamsek]

Maybe some visual stimulation will help...my favorite 9mm mold, drops 132grs with soft alloy...
200294

[AnthonyB]

Add me to the list for an 8 cavity aluminum plain base. Anthony B 45 at verizon dot net (no spaces).
Tony

[Wasalmonslayer]

Anthony would you like regular lube groove or hi tek style?

[Wasalmonslayer]

Friday bump :drinks:

[woody290]

1 ea - 8 cav aluminum mold traditional lube bevel base

woody290 at cox dot net

[Wasalmonslayer]

Got you down!

[Wasalmonslayer]

TGIF Bump :drinks:

[38SuperAuto]

Please add me to this buy.

qty=1 lube groove bevel base
deo... period... gratia... three.. three.... at.... yahoo... period... com

[Wasalmonslayer]

List updated

[hicard]

I'll take a bevel base w/lube groove 6 cavity brass. hicard21atoutlookdotcom

[Wasalmonslayer]

Updated

[Lybeck]

Sign me up for one 6cav brass mold ��
Flat base
Lube? Im going to powder coat so Im not sure what too use
Lybeck75@gmail.com

[Wasalmonslayer]

Signed you up for the smooth side if you pc then they cast easier :drinks:

[Lybeck]

Thanks :)

[Wasalmonslayer]

Friday Bump

[spruce53]

1 ea - 8 cav. aluminum flat base with hi tek smooth sided

billcor53 at yahoo dot com

[Wasalmonslayer]

Got you down spruce53

[meotai]

One 8 Cavity Aluminum
- Flat Base
- Hi Tek

meotai at yahoo dot com

[Wasalmonslayer]

Got you on the list

Thanks!

[GoodAlloy]

8 cavity flat base with lube groove
Amadaus 101 at hotmail dot com

[Wasalmonslayer]

Got you added goodalloy

Thanks

[WheelgunConvert]

6 cav brass HiTek bevel base
C_bevan... at... Yahoo... Dot... Com...

Also, what handles are these compatible with?

[Wasalmonslayer]

The lee six cavity handles work perfect or Miha makes his own that you can purchase with the mold.

Got you on the list :drinks:

[Gamsek]

:]

https://uploads.tapatalk-cdn.com/20170818/42af5b90d9b5182e1ebcd2feec66c7b7.jpg

get on the list to get this...perfect sharp holes in your target, usually clustered in one big hole;)

[bzajdek]

Boolits look great, I would like to sign up for an 8 cavity, flat base, hi-tech for powder coating.
bzajdek at hotmail dot com.

[Wasalmonslayer]

List updated

[Dirtjumper895]

I'm quite interested in a mold like this. This would be my first group buy, what is the approximate time table until delivery? Also what do these usually drop weight wise with no lube groove, either in wheel weight or pure?

[hensu]

add me for a 6 cav, brass,bevel base,no lube groove henrik at henrikochmaria dot se

[Wasalmonslayer]

I'm quite interested in a mold like this. This would be my first group buy, what is the approximate time table until delivery? Also what do these usually drop weight wise with no lube groove, either in wheel weight or pure?

This mold drops around 127 grains in wheel weight with the lube groove and bevel base.
Miha is working feverishly to crank out this molds for us he is just a one man shop.
No sure exactly when it will close but it is worth the wait he makes top notch molds :)

If you would like to get on all I need is your disguised email and what style of mold you would like.

[Dirtjumper895]

Well I'm sold... 8 boolits per cycles means more shooting for me. Put me down for an aluminum 8 cavity solid plain base for powder coating. Dirtjumper895 at g mail dot com . Thanks a bunch!

[Dpmsman]

I'll take a 6 cavity brass lube groove flat base.
JSTAHL construction at YAHOO dot Com

[Wasalmonslayer]

Got you both on the list.

Thanks!

[Wasalmonslayer]

Quick weekly bump :)

[warpspeed]

6 cav brass hi tek flat base

w (underscore ) lance at verizon (dot) net

[Wasalmonslayer]

6 cav brass hi tek flat base

w (underscore ) lance at verizon (dot) net


Got you down

Thanks!

[Wasalmonslayer]

Labor Day Friday Bump :drinks:

[silverjay]

I will take an 8 cavity aluminum, no lube groove, flat base.

Silverjay7 at gmail dot com

Thanks.

[Wasalmonslayer]

I will take an 8 cavity aluminum, no lube groove, flat base.

Silverjay7 at gmail dot com

Thanks.

Got ya down

[Dpmsman]

Please remove me from the list. Thanks

[Wasalmonslayer]

Updated

Got you off the list

[Mr. Woodchuck]

Please add me to the buy list. 8-cavity aluminum, no lube groove, flat base.
raedwards77 at g mail dot com
Thanks

[meotai]

Wasalmonslayer, I'm #9 on the Hitek list. Can you put me down for another of the same? I want two of the same mold. Thank you.

[Wasalmonslayer]

Wasalmonslayer, I'm #9 on the Hitek list. Can you put me down for another of the same? I want two of the same mold. Thank you.

Got you taken care of :drinks:

[DAFzipper]

Any news from Mihec on a time frame for this mould?

Sent from my LG-H700 using Tapatalk

[Wasalmonslayer]

Not as of yet.

I know he has a couple he is currently trying to finish before he moves this month.
The small wait is worth it!!!

As soon as I know something I will pass it along.

Thanks
Wasalmonslayer

[sargenv]

sargenv at s b c global dot n e t - 8 Cavity FB traditional Lube groove please?

[Wasalmonslayer]

sargenv at s b c global dot n e t - 8 Cavity FB traditional Lube groove please?

Got you down.

Thanks!

[Rockwell]

rockwell 5926 at gmail dot com
6 cav brass no lube groove flat base

[Wasalmonslayer]

rockwell 5926 at gmail dot com
6 cav brass no lube groove flat base


Got you down

Thanks!

[Mr. Woodchuck]

Wasalmonslayer,
Do you have me added to the list?
r a edwards 77 at gmail dot com

[Wasalmonslayer]

Wasalmonslayer,
Do you have me added to the list?
r a edwards 77 at gmail dot com

Mr. Woodchuck

I am very sorry!!!! I did miss you but I have you on the list now.

Thank you for catching my mistake!!!

Wasalmonslayer

[galaxy]

Thank you

[Wasalmonslayer]

sandor (underscore) p at hot mail (dottt) com - 6 Cav Brass Hi Tek Bevel Base

Thank you

Got you on the list

Thank you!

[Wasalmonslayer]

Monday bump

[Mr. Woodchuck]

Wasalmonslayer,
Could you please change my order to BEVEL BASE instead of flat base. All else the same. #18 on your list.
Thanks

[Wasalmonslayer]

Wasalmonslayer,
Could you please change my order to BEVEL BASE instead of flat base. All else the same. #18 on your list.
Thanks

Got you fixed up.

Have a good night!

[Hardcast]

H&G #275 clone. One 6 cavity brass mold please. Bevel base with lube groove. nclem at ffni dot com

[Wasalmonslayer]

H&G #275 clone. One 6 cavity brass mold please. Bevel base with lube groove. nclem at ffni dot com

Got you on the list

Thanks!

[Leadmelter]

gjpiech1954 @OutlookDOTcom
8 cavity, flat base, lube groove
Thank You

[Wasalmonslayer]

gjpiech1954 @OutlookDOTcom
8 cavity, flat base, lube groove
Thank You

Got you on the list

Thanks!

[Leadmelter]

My chemo is off track. I am going have to bail for time being. My jump back on in a few weeks.
gjpiech1954@Outlook.com.
Sorry

[Uncle Dave]

Please add me to the list for a 6 cav brass hi tek bevel base.
davelandvatter At yaH00 dot com.
Thanks
Uncle Dave

[Wasalmonslayer]

My chemo is off track. I am going have to bail for time being. My jump back on in a few weeks.
gjpiech1954@Outlook.com.
Sorry

Gotcha taken off.

I hope and pray all comes around for you!!!

Thanks

[Wasalmonslayer]

Please add me to the list for a 6 cav brass hi tek bevel base.
davelandvatter At yaH00 dot com.
Thanks
Uncle Dave

Got you on the list

Thanks!

[kayak1]

Please add me for Bevel base with a Lube groove jason AT kates D0T ORG
Thanks -Jason

[Wasalmonslayer]

Please add me for Bevel base with a Lube groove jason AT kates D0T ORG
Thanks -Jason

What style 6 cav brass or 8 cav alum??

[Wasalmonslayer]

Good Morning Gentleman we are currently sitting at 27 molds so this one should go into last call shortly.


Thank You :)

[Wasalmonslayer]

Weekly Bumpski :drinks:

We are currently sitting at 27 molds this one should go into last call fairly soon....

[galaxy]

Wasalmonslayer
Please remove me from the list, line 17. My preferred mold I've been hoping for was just released (147) and will have to pick one for time being. Sorry gents.

[Wasalmonslayer]

Wasalmonslayer
Please remove me from the list, line 17. My preferred mold I've been hoping for was just released (147) and will have to pick one for time being. Sorry gents.

Got you taken care of.

Thanks

[Dirtjumper895]

I'd like to change my base type from plain base to bevel base. I'm #13 on the hytek list. Also any update on when they may get made?

Thanks!

[Wasalmonslayer]

I'd like to change my base type from plain base to bevel base. I'm #13 on the hytek list. Also any update on when they may get made?

Thanks!

Got you fixed up!

[Wasalmonslayer]

LAST CALL on this one!!!!!!!

[Wasalmonslayer]

Saturday bump get on while you can.....:grin:

[kevin c]

OK, sargenv convinced me to dip my toes. Put me down for one 8 cav aluminum bevel base slick side for HiTek for kevin underscore c #fifteen#twenty at ya ho o d o t c o m

[Wasalmonslayer]

OK, sargenv convinced me to dip my toes. Put me down for one 8 cav aluminum bevel base slick side for HiTek for kevin underscore c #fifteen#twenty at ya ho o d o t c o m

Got you down.

Thanks!

[Wasalmonslayer]

Saturday bump

[Law.man]

Can I get in on that? Let me have one brass six cavity, lube groove, bevel base and a set of handles. Worgen (dot) wiki (at) gmail (dot) com. Thanks!

[Wasalmonslayer]

Can I get in on that? Let me have one brass six cavity, lube groove, bevel base and a set of handles. Worgen (dot) wiki (at) gmail (dot) com. Thanks!

Got you down

Thanks!

[Uncle Dave]

Please change my order #19 Dave Landvatter Hi Tek list to a FLAT base please. Thanks

[Plan_IX]

Count me in for a 6 cavity brass, plain base and traditional lube.
Awebb (at) teamwebb (dot) net

[Wasalmonslayer]

Please change my order #19 Dave Landvatter Hi Tek list to a FLAT base please. Thanks

Got you fixed up

[Wasalmonslayer]

Count me in for a 6 cavity brass, plain base and traditional lube.
Awebb (at) teamwebb (dot) net

Got you on the list.

Thanks!

[MiHec]

CLOSED!

I'm machining cavities as we speak

[sargenv]

Woo hoo! So Excited! :)

[MiHec]

https://scontent-frx5-1.xx.fbcdn.net/v/t31.0-8/23550155_2048666912030740_6804977949606264580_o.jp g?oh=955cc1fc4d9e266974a8f4ded724c451&oe=5A65519D

[Warhead]

Looks amazing!! :razz:

[sargenv]

Just waiting on an email billing... :)

[MiHec]

PayPals are out!

[sargenv]

Got my invoice... and paid! :)

[hicard]

Paid mine.

[AnthonyB]

Received and paid mine today.
Tony

[Warhead]

Received and paid! :razz:

[warpspeed]

Received and paid - thanks

[Dirtjumper895]

Received and paid! Thank you, can't wait to cast with it!

[Uncle Dave]

Paid my bill.

[hensu]

received and paid.

[woody290]

Received and paid

[Law.man]

Look what the mailman brought in this morning. Can you spell B-E-A-UTIFUL? :-D
208909

[meotai]

Look what the mailman brought in this morning. Can you spell B-E-A-UTIFUL? :-D
208909

No, but I can spell SEXY. Urghh! that's a nice chunk of brass.

[hicard]

Don't you have it on the handles backwards?

[WheelgunConvert]

Wood ends towards the mould?

[WheelgunConvert]

Sorry, couldn't resist the voices.:bigsmyl2:

How long after payment does shipping from EU to mid south generally take?

[Law.man]

Wood ends towards the mould?

I don't follow.

[Wasalmonslayer]

Shipping depends on customs a lot and this time of year is very busy.

Usually it is 2-3 weeks

[silverjay]

Mine arrived today. Wife promptly put it under the tree!

[hicard]

LAW.MAN will figure it out when he tries to cast with it. Clue, the mold goes on the other way around.

[warpspeed]

Mine arrived today/ Nov 28 to Dec 15 is 17 days.

[Law.man]

Already cast with them, real pleasure to work with. Still not getting that business about wood end towards the mold tho...But you can install the handles from either side since it only has short sprue plate without a third handle (as popsed to aluminum 8 cav. mold, which has the lee style third handle on the sprue plate).

[WheelgunConvert]

Its just an odd twist on the handle backwards . Me being stupid. Please don't be offended, I don't deal well with the public in person or text.

I'm still anxiously awaiting my unit. Has anyone cast some of the HiTek version yet? I'm curious about the weight of the projectile without the grooves. My guess is that it will be 135 ish.

[Uncle Dave]

Got my mold today.

[flydad]

I missed out on this one , any chance there is an extra 8 cavity NLG bevel base left over?

Thanks,

Flydad

[Wasalmonslayer]

I missed out on this one , any chance there is an extra 8 cavity NLG bevel base left over?

Thanks,

Flydad

Send Miha a private message he usually has a few over runs :)

[flydad]

thanks that would be nice:bigsmyl2:

[Warhead]

Its just an odd twist on the handle backwards . Me being stupid. Please don't be offended, I don't deal well with the public in person or text.

I'm still anxiously awaiting my unit. Has anyone cast some of the HiTek version yet? I'm curious about the weight of the projectile without the grooves. My guess is that it will be 135 ish.

Mine is dropping at 133.7-134 with my alloy, and what a dream to cast with bullets can't wait to jump out of the mold! :razz:

[kevin c]

Dear Lord, I forgot I ordered, didn't check here, and missed the invoice. Sorry MiHec! Payment sent!

[sargenv]

I suspect mine is at the post office. I got a notice 2 days ago to pick something up that needed a signature.. haven't had time to drop by.. will likely drop by today..

[WheelgunConvert]

Thank you for the reply about the cast weight. I start my ladders with #2 alloy and eventually dope softer if performance holds true. My go to propellant is HP38/w231... I'm planning to ladder b/w 3.7-4.2 for 9mm and 3.8-4.6 for 38sp.

[flydad]

can some of you post pictures of the bevel base boolits with no lube groove. Would love to see them.

[sargenv]

Picked it up last night.. nice looking mold :)

[Law.man]

Loving these little buggers!
209994

[WheelgunConvert]

210053
Avg 132grains after PC. They are bevel base cast with #2 alloy in a brass mould.

[meotai]

Thanks MiHec! I received both moulds last Saturday. I hope it doesn't rain in Houston this weekend; can't wait to try them out.

[Gamsek]

With lube groove and bevel base, out of 6cav brass mould, it drops 132grs with almost pure lead and 128.5grs with pure60/lino40+tin. Very consistent weights, accurate and they make perfect round holes in paper.
https://uploads.tapatalk-cdn.com/20171228/999bcee0d9422befdc4d8d3e2581f656.jpghttps://uploads.tapatalk-cdn.com/20171228/3589f4cd19d991b93acd4766677b6f91.jpg

She did it well? [emoji6]

[meotai]

Its just an odd twist on the handle backwards . Me being stupid. Please don't be offended, I don't deal well with the public in person or text.

I'm still anxiously awaiting my unit. Has anyone cast some of the HiTek version yet? I'm curious about the weight of the projectile without the grooves. My guess is that it will be 135 ish.


I'm getting 137~139gr with the NLG & flat base using range lead.

[WheelgunConvert]

What are your load ladder plans? All 9mm or any 38sp in the mix?
My first batch that were 132 PCd were all #2 alloy. I usually will dope with more Pure lead once I get more comfortable with a projectile and the cast weight will go up a little.

This is my first brass mould and I love how it maintains the heat so evenly.

[Law.man]

Mine work well loaded in 38 special, at least my 3" S&W mod. 64 seems to think so :)
Here is quick 30 rounds at 25meters. For some reason I shoot it more accurately in double action, go figure :Fire:.
210829

[kevin c]

Got mine today (a bit late due to my missing the email invoice and getting payment out late - thanks Miha, for putting up with a first time newby).

What a great looking mold! I didn't know the aluminum 8 cavity came with a sprue cutting handle, and with a set screw already in place to save the side of the mold. Planning on casting tomorrow - can hardly wait 8^D.

[DAFzipper]

This is my first 8 cavity mould. Now I want all my moulds in 8 cavity. Awesome to cast with and fast.

Sent from my LG-H700 using Tapatalk

[MiHec]

I still have some (25. feb. 2018)
8 cav's are ALU and 6 cav's are brass.

PM me if you want one

HG 275 6CAV HITEK BB.......... 1 pcs
HG 275 HITEK FB 8CAV AL .......... 1 pcs
HG 275 HITEK BB 8CAV .......... 0 pcs...... taken
HG 275 8CAV BB LUBE GROVE.......... 0 pcs...... taken
HG 275 6CAV FB LUBE GROVE.......... 0 pcs...... taken
HG 275 6CAV HITEK FB.......... 2pcs

[Two Barrels]

Mihec,

I sent you a PM on the 6 cavity, flat base, lube groove mold.

[Kawacharles]

I send you a PN on the HG 275 8CAV BB LUBE GROVE mold.

[Kawacharles]

This mold is a dream! Very easy handling, fast retracted, all eight caverns dimensionally stable, my best mold ever!
And i have over 60 molds, but this is my first employed MP-Mold.215704215705215706215707215708

Happy Charles

[MiHec]

This mold is a dream! Very easy handling, fast retracted, all eight caverns dimensionally stable, my best mold ever!
And i have over 60 molds, but this is my first employed MP-Mold.215704215705215706215707215708

Happy Charles

And made in neighbourhood.... he he

[Papercidal]

Pm sent on HG 275 HITEK BB 8CAV .......... 1 pcs

[flydad]

Hi Mihec,

I would like to buy one of these if you have one left, HG 275 HITEK BB 8CAV. I am currently waiting for the mp 200 gr 45ACP mold to be completed. Very excited about that as well. This will be my 4th mold of yours and I love them all.

thanks,

Flydad

[Dirtjumper895]

This mold is a dream! Very easy handling, fast retracted, all eight caverns dimensionally stable, my best mold ever!
And i have over 60 molds, but this is my first employed MP-Mold.215704215705215706215707215708

Happy Charles


Can i ask what alloy and temperature you are running your pot at? I have the same mold, but for some reason I keep getting wrinkled boolits. I know it is not a mold manufacturing issue, just a learning curve of the operator issue. Right now I use 100% clip on wheel weights, and the pot between 680 and 700 degrees. This is the same temperature I can get a simularly sized Accurate 9mm mold to cast beautiful bullets at. Any suggestions ?

[Gamsek]

Can i ask what alloy and temperature you are running your pot at? I have the same mold, but for some reason I keep getting wrinkled boolits. I know it is not a mold manufacturing issue, just a learning curve of the operator issue. Right now I use 100% clip on wheel weights, and the pot between 680 and 700 degrees. This is the same temperature I can get a simularly sized Accurate 9mm mold to cast beautiful bullets at. Any suggestions ?

Hi,

I am using my 6cav brass version since 2016 and produced thousands of beautiful bullets with no hassle- the secret in brass moulds, specially holowpoint with pin version, is in a hot plate. Use it!

Preheat your precious mould (gently - half power on my switch) on a hot plate for 15 minutes and you will get keepers after second or third pour. If you hit the right temperature you can get keeper after first pour-it happens;)
https://uploads.tapatalk-cdn.com/20180321/e3ee8d79b79e2e660f181cb68c136264.jpg

[Kawacharles]

Can i ask what alloy and temperature you are running your pot at? I have the same mold, but for some reason I keep getting wrinkled boolits. I know it is not a mold manufacturing issue, just a learning curve of the operator issue. Right now I use 100% clip on wheel weights, and the pot between 680 and 700 degrees. This is the same temperature I can get a simularly sized Accurate 9mm mold to cast beautiful bullets at. Any suggestions ?

I use 80% diabolo airgun lead, and 20% writing lead.

I have no idea, what lead temperature i use, its a fingertip feeling after 26 years of casting bullets.

Too hot ww-lead favored shrinked bullets, says my experience.

216825216826

Charles

@Edit: Wrinkled bullets, i misread it, sorry! Mold is too cold, get it a bit hotter! And/or degrease the caverns proper.

[schemelschelm]

Does anyone here have experience to use a flat side boolit (designed for powder coating - without lube grooves) with tumble lube only? Will it work?

[flydad]

No it will more than likely lead the barrel. Better to powder coat or Hitek . Very good instructional article on PC on MiHek website, MP molds.com. It is the method I use and get great results.

Good Luck!

[flydad]

Received invoice for 6 cav BB and paid today!

[flydad]

Those look great, can't wait to get mine.

[Dirtjumper895]

Turned up the heat to 750, and this is what I got. Way easier to cut sprues now as well.

[flydad]

Those really look nice , a little frosty? PC will stick great to those. Cant' wait for mine. How long did shipping take from the time you paid?

[Papercidal]

Mine arrived today. I'm looking forward to trying it out.

[MiHec]

All gone....

[J. DIEGO]

Thanks Miha received