Copper shim for gas checks.

[JeffinNZ]

Team.

Would "High Conductive Copper 110, ETP Copper" be suitable for gas checks?

I want to try some but want an idea of how workable it is before I part with the minimum purchase of $50.

[Buckshot]

Team.

Would "High Conductive Copper 110, ETP Copper" be suitable for gas checks?

I want to try some but want an idea of how workable it is before I part with the minimum purchase of $50.

Data for: Alloy copper C11000 (copper 110/ETP copper c110)

Includes: Ag

Design properties: Copper, ETP, Electrolytic Tough Pitch. Has conductivity 101% IACS. Ductile, anneal resistant.

Probably the most interesting for the purpose of making GC's: ..............

Hot Working: This alloy's capacity for being hot formed is rated as "excellent".

--------------------------------------------------------------------------------

Cold Working: The capacity for cold working this alloy is rated as "excellent".

--------------------------------------------------------------------------------

Annealing: The annealing temperature for this alloy is between 700 and 1200 F.

Info from: http://www.suppliersonline.com/propertypages/C11000.asp#Spec

...............Buckshot

[JeffinNZ]

Knew I could count on the Buckshot dude. I am beginning to think of you as a guiding Guru father figure. :drinks:

[runfiverun]

buckshot can find some info
and it is always accurate.