Troubleshooting Bullets freshly cast

[bbogue1]

Somewhere I have seen a chart that tells the thing to do should you have different kinds of results making bullets. I remember it saying if your bullet looks like ... do this. Things like if you get this result your mold is too cold or if the bullet looks like then add more tin to your alloy or if your bullet is to hard add .... I've searched but I can't find it.

Anybody know where it might be? I am sure it would be very handy to many people.

[Wayne Smith]

Damaged boolit base - toss back in pot
incompletely filled out boolit - toss back in pot (rounded rather than sharp edges)

[JBinMN]

This may not be exactly what you are looking for right now, but it may help anyway..
:???:

http://castboolits.gunloads.com/showthread.php?251386-Bullet-casting-decision-tree-for-troubleshooting&p=2902600&viewfull=1#post2902600

Hope that helps a bit.
:)

[Grmps]

This is a "BIBLE" for cast bullets
From Ingot to Target: A Cast Bullet Guide for Handgunners ©
http://www.lasc.us/Fryxell_Book_Contents.htm
Chapter 2: Casting 101 Casting Basics

[pjames32]

Download the Fryxell book. It is the bible for casting and I refer to it often.

[oldblinddog]

Lyman cast bullet #3 is what you are looking for.