NOE Boolit Mold 310-196 FN MX2-30H

[Sendaro]

I have been looking over a boolit design and mold on the NOE site. It is mold 310-196 MX2-30Hand can be had with or without a GC. I like what I see in the drawing and think it maybe a good one to use in my 308 Win, and 30-30 with a 1 10" twist. They rate the BC at .4446 and the as cast dia. at .310 with CWWs. I'd opt for the GC mold and want to push it at about 1500 to 1600 fps. Goal is accuracy at ranges from 100 yards to 500 yards.

Would like to hear from those who have used this boolit and what they have to say about it. Also suggestions from other who have used a similar one.

Thank you, Sendaro

[runfiverun]

http://noebulletmolds.com/NV/images/N.O.E._Bullet_Moulds_310-196-FN_(GC)_Sketch.Jpg

[Sendaro]

Runfiverun, You stated ---> it's all an educated guess,,,, till the trigger is pulled. Well I've bought the mold and cast up a few hundred of them. I plan to test fire later in the week. Let's just see what happens when the bang switch gets tickled.

Sendaro