NOE 314316 GC / 327 Max Loads

[jjnpg317]

I would like help in finding info on this boolit. I cast two hundred of them for use in a Ruger BH and a GP100 with powders H110, 2400, and A#9. The reloading manuals I have ( Lyman's /RCBS )are so old that the 327 is not even listed. I have used 2400 in 41, 44, & 45 but know nothing of it's use in a smaller caliber. H110 and A#9 are powders I have never used but were recommended by a fellow shooter.

I also bought a mold from Arsenal Molds that is 313631 for use in these revolvers, but again no info for this boolit either.

Barrel slugs at 312 and I can push both boolits through both their cylinders at 313 with slight resistance. Should I stay at 313 or go to 314 ?

Thanks

[Guesser]

I use 9.4 gr. of 2400 under the Lyman 311316 sized .313 and gas checked. But I only have the smaller, lighter Rugers in 327; Single 7 and SP-101