Need a mold and sizing die for .268

[braddonovan67]

Does anyone have a mold and sizing die for .268? I have a Carcano and getting the right sized bullets for it in Northern Alberta is rather difficult. If such tools do not exist, what does a guy need to do to make them? I am pretty handy and can do very basic machining and fabricating.

Sent from my SM-G900W8 using Tapatalk

[runfiverun]

http://noebulletmolds.com/NV/index.php?cPath=27
here are some .268-270 diameter molds.

what type of sizer do you have?
one of our vendor sponsors does custom size dies for the star sizers, and the site I linked has custom push through size dies similar to LEE.

[Yodogsandman]

Temporarily out of stock but, get on the list...

http://www.buffaloarms.com/Custom_Sizing_Die_it-158282.aspx?CAT=4179

[rwadley]

Lyman used to make a .267 sizer die.

[braddonovan67]

Thats a good start! Thanks guys. The sizing die i need would have to fit on a lee or rcbs press.

Sent from my SM-G900W8 using Tapatalk

[runfiverun]

the NOE's will do that.
they are similar to the lee type sizers but with a replaceable size insert.