Is it possible to buy...

[sniper]

Before I quit casting, my favorite mould and boolit was the RCBS 150 gr. SWC. I cast and shot loads of them. Does anyone know of a commercial caster that sells this particular boolit? I have a bunch from my last casting session but the pile is getting smaller, and I would like to find a replacement, or a good alternative. I would even consider a 158 gr. of similar design.
Thanx

[M-Tecs]

What mold # and caliber?

[Scharfschuetze]

RCBS 38-150 Keith Type.

I have that mould and it's a really good one. Mine has been producing great bullets (mostly from WWs) since the mid 70s.

I've never seen it listed by a commercial caster. I don't think that it will fit their automated machinery. Almost all of the commercial casters offer a 158 grain SWC that should work for you. Almost all of these commercial 158 grain SWC will be cast from very hard alloy.

[Tatume]

Montana Bullet Works at https://www.montanabulletworks.com/shop/?filter_caliber=357 offers two bullets that may interest you. They are:

357, RCBS 82065, 158gr, SWC-GC
and
357, RCBS 82032, 158gr, SWC-PB

All bullets are hand cast, and my experience dealing with the owners has been outstanding.

[Guesser]

Check" Rimrock Bullets"; they have a very wide and varied selection. You can order by hardness as well as style and weight.

[ioon44]

Try http://www.glcbullets.com/ for the 158 gr SWC BB, you can also get them with Hi-Tek coating.

[S.B.]

Montana Bullet Works at https://www.montanabulletworks.com/shop/?filter_caliber=357 offers two bullets that may interest you. They are:

357, RCBS 82065, 158gr, SWC-GC
and
357, RCBS 82032, 158gr, SWC-PB

All bullets are hand cast, and my experience dealing with the owners has been outstanding.
Most of the bought cast bullets I've shot lately have come from Dave and family, very good people to do business with, I agree!
Steve

[sniper]

Thanks for the suggestions. I took the advice in a couple of other posts, and an article by Ed Harris, that said the revolver throat dimensions were the most important. I don't have the means to slug or measure my barrel, but I have some some Speer .360 lead balls, so I slugged my cylinder throats....3577, .3575, .3575, .3573, .3573, .3575. So, what diameter boolits do I order? .357, which matches (sort of) my cylinder throats, or .358?
Thanks.
C.

[Taterhead]

I have the RCBS mold, and agree it casts a nice bullet. Before I got into casting (a recent development), I was loading a 158 gr SWC from Leatherhead bullets. They are Hi-Tek coated. Recommend them.

[S.B.]

Hi-Tek coated? Molly or what?
Steve