Question 6.5 Lee mold from midsouth

[corvette8n]

Does anyone know what dia. these drop at. I would like to try in a Carcano but need it to drop at .269

[looseprojectile]

Don't know if this helps. I bought the Lee mould from Midway that casts a 168 grain flat point gas checked boolit. When I size it to .267" the sizer shines all the driving bands. Dont have any left that are unsized, sorry. I used wheel weights and about one eighth lino. Size might be made larger with the right alloy and temp.
If it's the same mould it should work.

[Buckshot]

http://www.fototime.com/B55472729A707A9/standard.jpg

..............The one on the right. The Oldfeller Cruise Missle :-). My copy of the mould drops right at .269" with old WW metal, or about 12 bhn.

................Buckshot

[1Shirt]

My lee drops .2695 with my alloy (hard). It is one of the early ones in single cav.
1Shirt.:coffee:

[Maximilian225]

These Figures are for my mold, and I imagine they will change a small amount as its going to require leementing, the 1st cavity is very "sticky"

79437944

:castmine:

[Maximilian225]

Well I have been dilitary in posting these as I have been to busy casting them instead.