Lyman 45 Sizer

[Eddie Southgate]

I have one with the lower portion of the threaded rod that the pressure nut threads on to broke off . Any Idea where I might get a replacement ? I have contacted Lyman but they have not responded . Any help appreciated .

Eddie

[WALLNUTT]

Lyman has them but they are a little hard to deal with.

[Skunk1]

Lyman is slow. I've contacted them before and either no answer or no help. Ask about the no answer and they have no idea about it even with their ticket system.

[Eddie Southgate]

Maybe I just need to be a little more patient with them . I tried to buy the screws to mount the mold blocks from them a while back and it took them a week to tell me that they sold mold rebuild kits that included these screws . That I already knew but did not want to pay $10 to get the two screws I needed .Thanks for the info .Now I know that they do have the parts so I'll just wait to hear from them. It is a piece of equipment that was given to me probably 15 years ago by a good friend and I'm just now thinking I need to get it working so my boys can use it and leave my #1 alone.

Eddie

[JonB_in_Glencoe]

Item 9
Pressure Screw $6
http://www.lymanproducts.com/store/page151.html

[Eddie Southgate]

Thanks JonB ! I ordered the Pressure screw and new style O ring nut .

Eddie

[racepres]

Huh???
The model 45 Is the only lubri-sizer I own...Maybe a bit Fragile tho I have not broken it yet...
There will be no Playing, with mine...

[mold maker]

I've had good luck with a phone call.

[Eddie Southgate]

I've had good luck with a phone call.

I sat on hold one day for thirty minutes trying to ask about the screws.Got tired and hung up.

Eddie

[Beagle333]

I hope that'll get it back in shape for you/them. I do like my #1's. I think it's easier to get my fingers in there (than my 45's) without dropping the boolit.

[Skunk1]

I sat on hold one day for thirty minutes trying to ask about the screws.Got tired and hung up.

Eddie

They finally got back to me. 2 1/2 weeks later. They want $12 plus shipping for a small screw. No thanks

[ascast]

Thanks JonB ! I ordered the Pressure screw and new style O ring nut .

Eddie
you sure that will work? those listed are for 450/4500 not the 45. it might work fine

[JonB_in_Glencoe]

45/450/4500 use the same pressure screw. the #1 is different

[Eddie Southgate]

I also just found them listed on ebay ( pressure screw ) at $12.95 each and a tad under $8.00 for an O-ring set . Lyman is cheaper if slower .

Eddie

[Eddie Southgate]

Thanks JonB ! I ordered the Pressure screw and new style O ring nut .

Eddie

On the 13th of December and they are still not here.

Eddie