30-30 Load Question

[ProudOkie]

Hey folks, I cast up some wheel weight 30-30 w gc, lyman says start for 173 grain cast is 22 grains of h335 max of 30. Problem is my lee 170 grain mold is throwing 178 to 180 grain boolits. Any ideas if im safe with the same grain range on the h335 powder?

ANy ideas is much appreciated!

[runfiverun]

use the data you have, your fine.
this is normal.

[clum553946]

Start at the lower range close to the starting data & you'll be fine!