PDA

View Full Version : Maxxtech 9mm



DrDucati
08-21-2016, 10:07 AM
Came across this brass on the range. Doesn't resize easy due to that inner step in diameter with the ledge. What is the deal with this design?174934

farmerjim
08-21-2016, 10:44 AM
Bullet can't be pushed too deep in case and cause excess pressure.

Tatume
08-21-2016, 10:59 AM
Maxxtech makes blanks for semi-auto and full-auto blank firing weapons. Could this be what you have?

Chris24
08-21-2016, 11:08 AM
I found a few of these in my 9mm range pickups. I loaded them with no problems.

runfiverun
08-21-2016, 12:06 PM
I foubd about 75 of them at our range a while back.
I just tossed them in the recycle brass bucket.
I got around 20-k pieces of 9mm, I don't need something different to deal with.

now if I needed a project and had 500 cases I would explore a 2gr load of bulls-eye type scenario with an 80-85gr boolit and go for ultra cheap fun.