Value of press

[Charliet3]

I have olderv lyman sizer lubricating press and dies and end caps to push bullits down wander whatv average used price for press and dies and caps in real good conditionis.
Thanks for help
charlie

[Char-Gar]

There are several generations of these, and the price will vary with generation, plus as always condition is important.

Without pics or more information, your question can't be answered, at least by me.

[Charliet3]

Condition of press and dies and punches is very good iks model 450 am not cdomputer person don`t knolw how to do pictures

[Char-Gar]

OK...There is another guy selling a Lyman 450 on the site at this time. Here is a link to that thread so you can get some idea of value.

http://castboolits.gunloads.com/showthread.php?312669-FS-Lyman-450-Sizer-Lubricator

[yenningComity]

A pic is worth a thousand words.

[Drew P]

But a vid is worth a thousand pics.

[JonB_in_Glencoe]

A complete functional sizer will go for $50 to $100
add some dies and TP's the value goes higher.
Good Luck

[CHeatermk3]

I bought my Lyman 450 from optics planet 2 yrs ago with the new style heater (a rod-like thingy that goes into a hole in the bottom back of the lube reservoir near the bottom of the sizer) for $180 shipped I think it was, on sale.

http://www.opticsplanet.com/s/lyman-luber-sizer?nospell=1

[Walter Laich]

also there is no collector value in the 450s and they are the current models

[VHoward]

I believe the 450 was the previous model. The current model is the 4500. http://www.lymanproducts.com/lyman/bullet-casting/4500-lube-sizer.php