View Full Version : Data help please - 430-gr WFN GC
The_Montanan
05-25-2008, 09:14 AM
Well I just can't seem to find any data on a load for this bullet.
Any body got some good "mild to wild" H322 data?
http://www.rimrockbullets.net/catalog/images/458_CAL_430_GR_WFN.png
felix
05-25-2008, 09:28 AM
What case size? ... felix
The_Montanan
05-25-2008, 09:29 AM
45-70
felix
05-25-2008, 09:50 AM
Maven has a lot of experience using this powder. Perhaps he has loaded the 45-70 with it. If nobody comes to the aid here, I would suggest using 3031 statistics for a 500 grainer. Bounce around the average load as obtained from the reloading books as a beginning load for your boolit. Make sure your boolit diameter is large enough for the chamber, like a tight fit into a fired NEW case. ... felix
skeet1
05-25-2008, 09:51 AM
The Montanan,
It also depends on which .45-70 rifle you are using. A Trapdoor Vs. Ruger No.1 and what you are going to use it for plinking or hunting. It you are using a stronger rifle you might check out the Hodgdon manual the show 50 to 54 gr. in modern firearms for bullets of 385 to 405 gr. A very interesting article on this subject is Ken Waters Pet loads; very well done.
Skeet1
The_Montanan
05-25-2008, 10:15 AM
Marlin 1895G
Thanks
The_Montanan
05-25-2008, 11:28 AM
Just got some good information.....
430 LFN GC .459 H322 50 grains 1850 fps
hedgehorn
05-26-2008, 08:29 PM
That ought to geddumout! I am curious to see what your trajectory is like with that boolet. My XLR shoots pretty low with that large a slug.
vBulletin® v3.7.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.