Source for 500 Jeffery ?

[kevan]

This has probably been hashed over before, I'm looking for a source for either cast boolits or better still a mould for same that will work in the 500 Jeffery.
I'm guessing about a .511 dia. and a weight somewhere less than 600 gr.
The rifle is not in my hands yet so I cannot slug the bore.

The other problem is that I live in BC Canada so naturally I'm trying to find a Canadian source.
Any help or suggestions are greatly appreciated.

[Nrut]

Kevan,
Check out Mt Molds or Accrate Molds for what you are looking for..
They both offer custom sized molds for a reasonable price..
They both ship to Canada..

http://www.accuratemolds.com/catalog.php?page=15

[kevan]

Thanks Nrut, will do.
I've been away from the casting pot for a while thanks to health issues but I intend to get back at it.
Accurate Molds make a very good product, I bought a mold from them years ago for a '73 44-40 and it worked very well.

Again, Thanks.

[flint45]

Accurate makes great molds Ilove mine have 4 all are great.

[smoked turkey]

I am just starting the journey on loading and shooting the 505 Gibbs, and as soon as I can get the rifle I will slug the bore and the next stop will be Accurate for a custom mold. Tom does great work at a reasonable price.

[MT Chambers]

In Canada .50 cal. cast boolits are avail. from M.T. Chambers supply, including PP, hollow point, FP, etc. from 440 to 700 grs.

[Shiloh]

Those will eat up a pound of lead in a hurry!

SHiloh

[kevan]

In Canada .50 cal. cast boolits are avail. from M.T. Chambers supply, including PP, hollow point, FP, etc. from 440 to 700 grs.

Can you share contact info if allowed ?