View Full Version : 30x223 die set
brstevns
05-17-2016, 12:59 PM
Well long story short, I traded for a 30calx223 Savage barrel. This is the 30 cal on the 223 rem , just open up the neck on the 223 rem brass to 308. I cannot afford the dies. Does anyone have a old set lying about that I could trade something for?
BrassMagnet
05-17-2016, 03:39 PM
You should be able to neck size with Lyman 310 dies from any of the shorter 30 cal cartridges.
brstevns
05-17-2016, 04:16 PM
You should be able to neck size with Lyman 310 dies from any of the shorter 30 cal cartridges.
I will have to keep a watch on flea- Bay. I would need a adapter to use them in my Old Lyman Spartan Press.
How are you doing with that old RB Rifle ?
rockrat
05-18-2016, 12:20 AM
I just use lyman 300 blackout dies with my 30-223 that I just put together. 300 whisper might work for you, but the blackout worked better for me.
brstevns
05-18-2016, 07:51 PM
I just use lyman 300 blackout dies with my 30-223 that I just put together. 300 whisper might work for you, but the blackout worked better for me.
That is good to know
brstevns
05-19-2016, 09:42 AM
If 300 Black Out will work, does someone have a set of these lying about ?
brstevns
05-26-2016, 10:41 PM
Still looking for a trade
PaulG67
05-27-2016, 12:50 AM
You may also neck it with 30 Herrett dies .
skeettx
05-28-2016, 03:43 PM
Also, you can try neck sizing with 32 ACP, or 30 Cal Carbine dies :)
Mike
p.s. Blackout?? The cheapest I found way $35.35 and free shipping
http://www.ebay.com/itm/LEE-90575-PACESETTER-3-DIE-SET-300-AAC-BLACKOUT-/231444407251?hash=item35e32963d3:g:-CoAAOSwWTRW0E8z
brstevns
06-04-2016, 10:25 AM
Also, you can try neck sizing with 32 ACP, or 30 Cal Carbine dies :)
Mike
p.s. Blackout?? The cheapest I found way $35.35 and free shipping
http://www.ebay.com/itm/LEE-90575-PACESETTER-3-DIE-SET-300-AAC-BLACKOUT-/231444407251?hash=item35e32963d3:g:-CoAAOSwWTRW0E8z Would not the 223 case be too large for the 30 cal carbine dies?
skeettx
06-04-2016, 02:35 PM
30 Carbine For neck sizing :)
brstevns
06-04-2016, 06:41 PM
30 Carbine For neck sizing :) OK Got It![smilie=w:
brstevns
06-06-2016, 10:24 PM
Still hoping for a set
brstevns
06-22-2016, 01:07 PM
Well opened up 223 brass to 6x45 and then used a Lee 7.7 jap sizer that has the long tapered pin. Then used a RCBS 30-30 sizer die then a the RCBS 30-30 seater to seat the bullet. So far so good.
brstevns
07-13-2016, 09:28 AM
George sent me a neck sizing die. He sure gets around.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.