View Full Version : Saeco sizer die nut.
cutter_spc
05-13-2016, 09:02 PM
Need some info. I converted my Meepose sizer to accept saeco sizer dies, only problem is I don't have and can't find a nut to fit the die. Anyone know the thread pitch they use? Anyone know where you can buy just the nut? Thanks for your help.
R. Dupraz
05-13-2016, 09:35 PM
Redding Reloading customer service
cutter_spc
05-13-2016, 10:06 PM
Lol, have you ever had to deal with them? I've had two instances, the first was a part for my press which they left out, I was called a liar. The next was a mould I bought new of theirs, had chatter in it bad, took them three times to get it right and I had to pay the shipping, as they refused. I'll call them as a last ditch effort if I have to, but only if I have to.
R. Dupraz
05-14-2016, 06:38 AM
Yes, I have. Quite a while ago the leather washer in my 60's vintage sizer finally wore out. I got a new rubber one from them. No problems.
swheeler
05-14-2016, 11:27 AM
Need some info. I converted my Meepose sizer to accept saeco sizer dies, only problem is I don't have and can't find a nut to fit the die. Anyone know the thread pitch they use? Anyone know where you can buy just the nut? Thanks for your help.
I don't know if they make a nut to fit their dies as they thread into the sizer body. Maybe I'm missing something here?
cutter_spc
05-14-2016, 11:51 AM
Really? I would swear I've seen some of the dies with a small knurled nut on the bottom. 168140
marvelshooter
05-14-2016, 11:58 AM
Really? I would swear I've seen some of the dies with a small knurled nut on the bottom.
You are correct. The thread is 11/16 (.687) x 24.
cutter_spc
05-14-2016, 12:32 PM
Thank you so much, I thought it was just needed conformation.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.