reducing bushing

[bullet maker 57]

I need a 1" 12 x 7/8 14 bushing. Does anybody have any ideas where I might find one?

[Calamity Jake]

That's real thin walls between the OD and ID threads, are you sure about the size?

[KYCaster]

Lee Precision Classic Cast single stage press repair parts.

http://leeprecision.com/die-adapter-hex-bush.html
(http://leeprecision.com/die-adapter-hex-bush.html)

[tja6435]

Pretty sure Dave Corbin makes one. Richard Corbin may offer one as well.

[Hamish]

This?
http://www.midwayusa.com/Product/176245/lyman-7-8-14-thread-adapter-for-310-dies-and-model-55-powder-measure

[Geezer in NH]

This?
http://www.midwayusa.com/Product/176245/lyman-7-8-14-thread-adapter-for-310-dies-and-model-55-powder-measureNo wrong one post 3 has what you want

[bullet maker 57]

Thanks for the replies. I was tring to adapt a set of dies to another press. Figured out that the slot in the ram in my Rock Chucker had collapsed. Called RCBS and a new one is on the way.