Need load data for 35 Remington with RCBS 200-35 FN

[drw]

I need some load data and I have leverevolution powder and H335 Powder to load with. My cases are brand new Hornady. My bullet mold is the RCBS 200-35 FN. I am intending to powder coat the bullet. Bought a new 336 Marlin.

Thanks

[stubert]

Go to Hodgdons web site and use the data for 200 gr. jacketed.

[RU shooter]

I've only used the H335 , try the start load for the 200 gr jacketed bullet and work up till your at max or accuracy falls off which ever happens first

[Tatume]

Go to Hodgdons web site and use the data for 200 gr. jacketed.

My preferred powder is H4895. Use the starting load.

[dubber123]

I don't have my load notes handy, but H4198 bettered factory ballistics, and shot excellently. I ran out of case capacity with 3 other powders before trying H4198. The RCBS 200 is a great design.

[leftiye]

If you were by any chance wanting to increase power above standards (say you had a bolt action or other stronger action - Handi Rifle is capable of melting .35 rem cases without damage too, not that anybody has done so) 4198, RL7, and powders in that range would be needed as case capacity isn't large enough with any of the slower powders. If you're going to stay within standard power parameters, you might as well have a .357 max..