Noe 360-154-wfn gc

[Dickieray]

Anyone using this mold. I'm thinking about ordering one for 38 sp., 357 mag, maybe 357 max...
I will be using these boolits in pistols, TC pro-hunter, and a lever gun.
Opinions and advice will be greatly appreciated.........especially if you have used these projectiles.

[tazman]

I don't have that specific mold. I do have the NOE 369-160-wfn which is a plain base boolit. It works really well in 38 special and 357 mag.
My 357 loads are not full power. More like 1200fps. That is why I didn't need a gas check.

[GWM]

Noe 360-154-wfn gc

I have that one with gas check. Works well in .38 Special revolver.
Have tried it in automatics but it didn't work due to nose shape.

I liked the long nose, but bearing surface is limited and the crimp groove is rather diminutive, so I don't use it for hotter loads as in .357.
Works in .38 S&W too, without a gas check installed.

[Dickieray]

Any other comments/suggestions?

[RedHawk357Mag]

Deleted
I was confusing this one with my 360-180.

In this thread I asked a similar question. I have since casted with it and it casted very well but as of yet haven't sat down and put it to the shooting test. But it casted super easy as with most NOEs stuff.
http://castboolits.gunloads.com/showthread.php?t=300256